Arduino library for the 7Semi BME690 environmental sensor module. Reads temperature, humidity, barometric pressure, and gas resistance (VOC) data via I2C. Ideal for air quality and weather monitoring applications.
Official Arduino library for interfacing with the 7Semi L89HA GNSS Module over UART. This library enables easy communication and data parsing of NMEA sentences, allowing you to retrieve GPS location, time, and satellite data with minimal effort.
Arduino driver for AS7343 spectral sensor with multi-channel light sensing, FIFO, interrupts, and flicker detection.
This Arduino library provides support for the 7Semi-HMC6343 3-axis digital compass sensor over I2C. It allows reading of tilt-compensated heading, pitch, and roll, and includes features like magnetic variation correction and low-power control.
Arduino library for HDC302x temperature and humidity sensor with I2C, continuous mode, alerts, and calibration.
Arduino wrapper library for the Bosch Sensortec BMV080 particulate matter sensor (PM1 / PM2.5 / PM10).
Control the AS7343 multi-channel spectral sensor with this Arduino library to enable precise color analysis, light monitoring, and flicker detection via I2C.
Arduino library for 7Semi ADS1262 (10-channel) and ADS1263 (32-channel) 32-bit ADC boards. Supports SPI communication and high-precision differential or single-ended voltage measurements.
Arduino I2C driver for TI OPT4048 color sensor with RGB and lux helpers.
7Semi DAC7578 Arduino library for controlling an 8-channel 12-bit I2C DAC.
Arduino library for 7Semi SCD4x (SCD40/SCD41) CO₂, temperature, and humidity sensors using I2C
Arduino driver for the TMP102 high-accuracy digital temperature sensor with I²C interface, supporting alerts, conversion control, and power modes.
Arduino library for the MMC5983MA high-precision 3-axis magnetometer with I2C support.
Lightweight, high-accuracy Arduino library for MCP9808 temperature sensor with alert control.
Arduino library for VL53L1X time-of-flight (ToF) distance sensor featuring range presets, timing budget control, interrupt support, and calibration APIs.
Arduino library for Sensirion SCD40/SCD41 CO₂, temperature, and humidity sensors – by 7Semi.
Arduino library for the 7Semi MAX17048 Fuel Gauge Sensor Module. Measures battery voltage and state of charge via I2C.
Arduino library for INA240A1, INA240A2 and INA240A3 bidirectional current sense amplifiers with offset calibration and current measurement support.
Add a description, image, and links to the 7semi topic page so that developers can more easily learn about it.
To associate your repository with the 7semi topic, visit your repo's landing page and select "manage topics."