Update to use rollkit cli instead of <binary>d

.vitepress/config.ts

@@ -255,46 +255,68 @@ function sidebarHome() {
       collapsed: true,
       items: [
         {
+          text: "Configuration",
+          collapsed: true,
           items: [
             {
-              text: "How to restart your rollup",
-              link: "/guides/restart-rollup",
+              text: "Use the Rollkit CLI",
+              link: "/guides/use-rollkit-cli",
             },
             {
-              text: "How to run as a full and sequencer node",
-              link: "/guides/full-and-sequencer-node",
+              text: "Connect to a local DA",
+              link: "/guides/connect-local-da",
             },
             {
-              text: "How to configure gas price",
-              link: "/guides/gas-price",
+              text: "Create genesis for your rollup",
+              link: "/guides/create-genesis",
             },
             {
-              text: "How to change speed of block production",
-              link: "/guides/block-times",
+              text: "Restart your rollup",
+              link: "/guides/restart-rollup",
             },
             {
-              text: "How to use lazy sequencing (aggregation)",
-              link: "/guides/lazy-sequencing",
+              text: "Run as a full and sequencer node",
+              link: "/guides/full-and-sequencer-node",
             },
             {
-              text: "How to test and deploy smart-contracts",
-              link: "/guides/cw-orch",
+              text: "Configure gas price",
+              link: "/guides/gas-price",
             },
-            { text: "How to add zkML to your rollup", link: "/guides/zkml" },
             {
-              text: "How to add an IBC connection to your rollup",
-              link: "/guides/ibc-connection",
+              text: "Configure max pending blocks",
+              link: "/guides/max-pending-blocks",
             },
             {
-              text: "How to integrate Range with your rollup",
-              link: "/guides/rollkit-monitoring",
+              text: "Configure DA chain block sync time",
+              link: "/guides/da-block-time",
             },
             {
-              text: "How to use IBC token (TIA) as gas token in your rollup",
-              link: "/guides/use-tia-for-gas",
+              text: "Change speed of block production",
+              link: "/guides/block-times",
+            },
+            {
+              text: "Use lazy sequencing (aggregation)",
+              link: "/guides/lazy-sequencing",
             },
           ],
         },
+        {
+          text: "Test and deploy smart-contracts",
+          link: "/guides/cw-orch",
+        },
+        { text: "Add zkML to your rollup", link: "/guides/zkml" },
+        {
+          text: "Add an IBC connection to your rollup",
+          link: "/guides/ibc-connection",
+        },
+        {
+          text: "Integrate Range with your rollup",
+          link: "/guides/rollkit-monitoring",
+        },
+        {
+          text: "Use IBC token (TIA) as gas token in your rollup",
+          link: "/guides/use-tia-for-gas",
+        },
       ],
     },
     {

.vitepress/constants/constants.js

@@ -10,6 +10,6 @@ const constants = Object.freeze({
 
   localDALatestTag: "v0.2.0",
 
-  igniteVersionTag: "v28.3.0",
+  igniteVersionTag: "v28.4.0",
 });
 export default constants;

guides/connect-local-da.md

@@ -0,0 +1,31 @@
+# How to connect a rollup to a local DA network
+
+This guide provides a quick and straightforward method to start a local Data Availability (DA) network and configure your rollup to post data to it.
+
+## Setting Up a Local DA Network
+
+To set up a local DA network node on your machine, run the following script to install and start the local DA node:
+
+```bash
+curl -sSL https://rollkit.dev/install-local-da.sh | bash -s {{constants.localDALatestTag}}
+```
+
+This script will build and run the node, which will then listen on port `7980`.
+
+## Configuring your rollup to connect to the local DA network
+
+To connect your rollup to the local DA network, you need to pass the `--rollkit.da_address` flag with the local DA node address.
+
+## Run your rollup
+
+Start your rollup node with the following command, ensuring to include the DA address flag:
+
+```bash
+rollkit start \
+    --rollkit.da_address http://localhost:7980 \
+    <other-flags>
+```
+
+## Summary
+
+By following these steps, you will set up a local DA network node and configure your rollup to post data to it. This setup is useful for testing and development in a controlled environment.

guides/create-genesis.md

@@ -0,0 +1,112 @@
+# How to create a genesis for your rollup
+
+This guide will walk you through the process of setting up a genesis for your rollup. Follow the steps below to initialize your rollup chain, add a genesis account, and start the chain.
+
+## 1. Setting variables
+
+First, set the necessary variables for your chain, here is an example:
+
+```sh
+VALIDATOR_NAME=validator1
+CHAIN_ID=rollup-chain
+KEY_NAME=rollup-key
+CHAINFLAG="--chain-id ${CHAIN_ID}"
+TOKEN_AMOUNT="10000000000000000000000000stake"
+STAKING_AMOUNT="1000000000stake"
+```
+
+## 2. Ensuring `rollkit.toml` is present and building entrypoint
+
+Ensure that `rollkit.toml` is present in the root of your rollup directory (if not, follow a [Guide](/guides/use-rollkit-cli) to set it up) and run the following command to (re)generate an entrypoint binary out of the code:
+
+```sh
+rollkit rebuild
+```
+
+This creates an `entrypoint` binary in the root of your rollup directory. which is used to run all the operations on the rollup chain.
+
+Ensure that the chain configuration directory is set correctly in the `rollkit.toml` file, if you doubt it, you can remove the `rollkit.toml` file and run the following command to generate a new one:
+
+```sh
+rollkit toml init
+```
+
+## 3. Resetting existing genesis/chain data
+
+Reset any existing genesis or chain data:
+
+```sh
+rollkit tendermint unsafe-reset-all
+```
+
+## 4. Initializing the validator
+
+Initialize the validator with the chain ID you set:
+
+```sh
+rollkit init $VALIDATOR_NAME --chain-id $CHAIN_ID
+```
+
+## 5. Adding a key to keyring backend
+
+Add a key to the keyring-backend:
+
+```sh
+rollkit keys add $KEY_NAME --keyring-backend test
+```
+
+## 6. Adding a genesis account
+
+Add a genesis account with the specified token amount:
+
+```sh
+rollkit genesis add-genesis-account $KEY_NAME $TOKEN_AMOUNT --keyring-backend test
+```
+
+## 7. Setting the staking amount in the genesis transaction
+
+Set the staking amount in the genesis transaction:
+
+```sh
+rollkit genesis gentx $KEY_NAME $STAKING_AMOUNT --chain-id $CHAIN_ID --keyring-backend test
+```
+
+## 8. Collecting genesis transactions
+
+Collect the genesis transactions:
+
+```sh
+rollkit genesis collect-gentxs
+```
+
+## 9. Configuring the genesis file
+
+Copy the centralized sequencer address into `genesis.json`:
+
+```sh
+ADDRESS=$(jq -r '.address' ~/.rollup/config/priv_validator_key.json)
+PUB_KEY=$(jq -r '.pub_key' ~/.rollup/config/priv_validator_key.json)
+jq --argjson pubKey "$PUB_KEY" '.consensus["validators"]=[{"address": "'$ADDRESS'", "pub_key": $pubKey, "power": "1000", "name": "Rollkit Sequencer"}]' ~/.rollup/config/genesis.json > temp.json && mv temp.json ~/.rollup/config/genesis.json
+```
+
+## 10. Creating a restart script
+
+Create a `restart-rollup.sh` file to restart the chain later, notice the `rollkit.da_address` flag which is the address of the data availability node, for other DA layers it will be a different set of flags (in case of Celestia check out the tutorial [here](/tutorials/celestia-da)):
+
+```sh
+[ -f restart-rollup.sh ] && rm restart-rollup.sh
+
+echo "rollkit start --rollkit.aggregator --rpc.laddr tcp://127.0.0.1:36657 --grpc.address 127.0.0.1:9290 --p2p.laddr \"0.0.0.0:36656\" --minimum-gas-prices=\"0.025stake\" --rollkit.da_address \"http://localhost:7980\"" >> restart-rollup.sh
+```
+
+## 11. Starting the chain
+
+Finally, start the chain with the following command:
+
+```sh
+rollkit start --rollkit.aggregator --rpc.laddr tcp://127.0.0.1:36657 --grpc.address 127.0.0.1:9290 --p2p.laddr "0.0.0.0:36656" --minimum-gas-prices="0.025stake" --rollkit.da_address "http://localhost:7980"
+```
+
+## Summary
+
+By following these steps, you will set up the genesis for your rollup, initialize the validator, add a genesis account, and start the chain on a local data availability network (DA). This guide provides a basic framework for configuring and starting your rollup using the Rollkit CLI. Make sure `rollkit.toml` is present in the root of your rollup directory, and use the `rollkit` command for all operations.

guides/da-block-time.md

@@ -0,0 +1,14 @@
+# How to configure DA chain block syncing time
+
+The `--rollkit.da_block_time` flag is used to configure the time in seconds that the rollup will wait for a block to be synced from the DA chain. 
+
+```bash
+--rollkit.da_block_time duration
+```
+
+An example command would look like this:
+
+```bash
+rollkit start [existing flags...] // [!code --]
+rollkit start [existing flags...] --rollkit.da_block_time=30s // [!code ++]
+```

guides/max-pending-blocks.md

@@ -0,0 +1,15 @@
+# How to configure the maximum number of blocks pending DA submission
+
+The `--rollkit.max_pending_blocks` flag is used to configure the maximum limit of blocks pending DA submission (0 for no limit)
+
+```bash
+--rollkit.max_pending_blocks uint
+```
+
+An example command would look like this:
+
+```bash
+rollkit start [existing flags...] // [!code --]
+rollkit start [existing flags...] --rollkit.max_pending_blocks=100 // [!code ++]
+```
+

guides/use-rollkit-cli.md

@@ -0,0 +1,73 @@
+# How to Use Rollkit CLI
+
+This guide will walk you through the basics of installing and using Rollkit CLI. You'll learn how to install the CLI, initialize a configuration file (`rollkit.toml`), and run rollup commands.
+
+## 1. Installing Rollkit CLI
+
+<!-- markdownlint-disable MD033 -->
+<script setup>
+import constants from '../.vitepress/constants/constants.js'
+</script>
+
+To install Rollkit CLI, execute the following command:
+
+```bash-vue
+curl -sSL https://rollkit.dev/install.sh | sh -s {{constants.rollkitLatestTag}}
+```
+
+This command downloads and installs the Rollkit CLI of specified version.
+
+## 2. Initializing `rollkit.toml`
+
+The `rollkit.toml` file is a configuration file that Rollkit uses to understand the structure and entry point of your rollup. To initialize this file, follow these steps:
+
+### Steps to Generate `rollkit.toml`:
+
+1. Run the following command to generate the `rollkit.toml` file:
+
+    ```bash
+    rollkit toml init
+    ```
+
+2. You should see an output similar to this (example taken from [GM world](/tutorials/gm-world) tutorial):
+
+    ```bash
+    Found rollup entrypoint: /root/gm/cmd/gmd/main.go, adding to rollkit.toml
+    Could not find rollup config under gm. Please put the chain.config_dir in the rollkit.toml file manually.
+    Initialized rollkit.toml file in the current directory.
+    ```
+
+3. The output indicates that the rollup entrypoint is `~/gm/cmd/gmd/main.go`.
+
+4. Open the `rollkit.toml` file, and under the `[chain]` section, set `config_dir` to the appropriate directory where your chain configuration is. For GM World tutorial, `rollkit.toml` file looks like this:
+
+    ```toml
+    entrypoint = "./cmd/gmd/main.go"
+
+    [chain]
+      config_dir = "./.gm"
+    ```
+
+    Adjust `entrypoint` and `config_dir` according to your project structure.
+
+## 3. Running Rollup Commands Using Rollkit CLI
+
+Once you have the `rollkit.toml` file set up, you can run any rollup command using the Rollkit CLI. Ensure you are in the directory containing the `rollkit.toml` file when executing commands.
+
+### Example:
+
+1. Navigate to the directory containing the `rollkit.toml` file.
+
+2. Now you could do:
+
+    ```bash
+    # instead of <rollup>d start
+    rollkit start 
+    # instead of <rollup>d tx
+    rollkit tx
+    # for any <rollup>d <command>
+    rollkit <command>
+    ```
+## Summary
+
+By following these steps, you can install the Rollkit CLI, initialize the `rollkit.toml` configuration file, and run rollup commands. This setup helps you manage and interact with your rollup project efficiently.

public/install-gm-rollup.sh

@@ -3,6 +3,4 @@
 echo "Downloading GM tutorial rollup source code..."
 git clone https://github.com/rollkit/gm.git
 cd gm || { echo "Failed to find the downloaded repository"; exit 1; }
-git fetch && git checkout remotes/origin/tutorial-local-da
-echo "Building and configuring rollup chain..."
-bash init.sh
+git fetch && git checkout remotes/origin/tutorial-local-da-rollkit