MagicMirror² : Yeelight Bulb Control

A MagicMirror² Module for controlling the Yeelight Bulb

Enabling the LAN Control option

To enable the LAN control and make your lights discoverable by this module you need to:

1. Turn on your light.
2. Open the Yeelight app on your phone.
3. Navigate to device, tap on the arrow to open a option menu
4. Now select the LAN Control option
5. Finally, enable the LAN Control by tapping on the switch. It will become green once the LAN control is enabled.

Installation

1. Navigate into your MagicMirror's modules folder
2. Execute git clone https://github.com/putera/MMM-Yeelight.git
3. Run npm install

Using the module

To use this module, add it to the modules array in the config/config.js file:

You may use MMM-AssistantMk2 from https://github.com/eouia/MMM-AssistantMk2 to trigger the command

modules: [
    {
        module: 'MMM-Yeelight',
        config: {
            // See 'Configuration options' for more information.
            // remove the lights parameter if you want to control all the lights on the network
            lights: [
            	{ name: 'My Kitchen Light 1', ip: '192.168.1.10'},
            	{ name: 'Living Room 1', ip: '192.168.1.11'},
            	...
            ]
        }
    }
]

Configuration Options

The following properties can be configured:

Option	Description
lights	(Optional) List of all your Yeelight bulb