Syncing tree

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -1,258 +1,13 @@
 /*
- * Copyright (C) 2013 Russell King
- *
- * The code contained herein is licensed under the GNU General Public
- * License version 2.
+ * Copyright (C) 2014 Rabeeh Khoury ([email protected])
+ * Based on dt work by Russell King
  */
 /dts-v1/;
 
 #include "imx6dl.dtsi"
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
 
 / {
-	model = "SolidRun HummingBoard DL/Solo";
-	compatible = "solidrun,hummingboard", "fsl,imx6dl";
-
-        aliases {
-                mxcfb0 = &mxcfb1;
-        };
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio1 2 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	};
-
-	imx-drm {
-		compatible = "fsl,imx-drm";
-		crtcs = <&ipu1 0>, <&ipu1 1>;
-		connectors = <&hdmi>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-        sound-hdmi {
-                compatible = "fsl,imx6q-audio-hdmi",
-                             "fsl,imx-audio-hdmi";
-                model = "imx-audio-hdmi";
-                hdmi-controller = <&hdmi_audio>;
-        };
-
-        mxcfb1: mxc_sdc_fb@0 {
-                compatible = "fsl,mxc_sdc_fb";
-                disp_dev = "hdmi";
-                interface_pix_fmt = "RGB24";
-                mode_str ="1280x720@60";
-                default_bpp = <32>;
-                int_clk = <0>;
-                late_init = <0>;
-                status = "okay";
-        };
-
-        v4l2_cap_0 {
-                compatible = "fsl,imx6q-v4l2-capture";
-                ipu_id = <0>;
-                csi_id = <0>;
-                mclk_source = <0>;
-                status = "okay";
-        };
-
-        v4l2_cap_1 {
-                compatible = "fsl,imx6q-v4l2-capture";
-                ipu_id = <0>;
-                csi_id = <1>;
-                mclk_source = <0>;
-                status = "okay";
-        };
-
-        v4l2_out {
-                compatible = "fsl,mxc_v4l2_output";
-                status = "okay";
-        };
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc = <&i2c2>;
-	status = "okay";
-	crtcs = <&ipu1 0>;
-};
-
-&hdmi_audio {
-        status = "okay";
-};
-
-&hdmi_cec {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-        status = "okay";
-};
-
-&hdmi_core {
-        ipu_id = <1>;
-        disp_id = <0>;
-        status = "okay";
-};
-
-&hdmi_video {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_hdmi_hdcp_1>;
-        fsl,phy_reg_vlev = <0x0294>;
-        fsl,phy_reg_cksymtx = <0x800d>;
-        fsl,hdcp;
-        status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	/*
-	 * Not fitted on Carrier-1 board... yet
-	status = "okay";
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-	 */
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-	};
-};
-
-&spdif {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
-	status = "okay";
+	model = "SolidRun HummingBoard Solo/DualLite";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
 };

arch/arm/boot/dts/imx6q-hummingboard.dts

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury ([email protected])
+ * Based on work by Russell King
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -198,11 +198,11 @@
 		};
 
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
 		};
 
 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
 		};
 
 		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
@@ -244,6 +244,9 @@
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
 			>;
 		};
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
 	};
 };
 
@@ -257,6 +260,8 @@
 };
 
 &usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
 	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };