ESP32‐C5‐DevKitC‐1

Install Firmware

1. Clone this repo
2. In your workstation CLI, navigate to the C5_Py_Flasher directory
3. With your ESP32-C5 device unplugged, execute python c5_flasher.py and allow any missing python packages to install
4. Once you see Waiting for ESP32-C5 device to be connected..., connect your ESP32-C5 device to your PC via USB-C cable
5. Once you see Ready to flash these files to ESP32-C5? (y/N):, enter y and allow the firmware to flash
6. When the Hardware reset message appears on the screen, you may disconnect your ESP32-C5 device

3V3 Jumper

• For the C5 Flipper Zero Adapter, do not remove the 3V3 jumper

Installation Video

Next steps

GPS Connections

• Check GPS Modification

SD Card Connections

SD Card	ESP32-C5
MISO	GPIO2
MOSI	GPIO7
SCK	GPIO6
CS	GPIO10