Add BROTHERHOBBYF722 #823
Open
Add BROTHERHOBBYF722 #823
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
""" WalkthroughA new configuration header file for the BROTHERHOBBYF722 flight controller board has been introduced. This file defines hardware-specific macros, pin assignments, sensor configurations, timer mappings, and conditional UART port settings, structuring the board's integration with firmware. Changes
Sequence Diagram(s)sequenceDiagram
participant Firmware
participant BROTHERHOBBYF722_Config
participant Hardware
Firmware->>BROTHERHOBBYF722_Config: Include config.h
BROTHERHOBBYF722_Config-->>Firmware: Provide macros for hardware mapping (pins, sensors, timers)
Firmware->>Hardware: Initialize peripherals using config macros
Hardware-->>Firmware: Hardware ready for operation
Possibly related PRs
Suggested reviewers
📜 Recent review detailsConfiguration used: .coderabbit.yaml 📒 Files selected for processing (1)
✅ Files skipped from review due to trivial changes (1)
✨ Finishing Touches
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
SupportNeed help? Create a ticket on our support page for assistance with any issues or questions. Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
Documentation and Community
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
📜 Review details
Configuration used: .coderabbit.yaml
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
configs/BROTHERHOBBYF722/config.h(1 hunks)
🧰 Additional context used
🧠 Learnings (2)
📓 Common learnings
Learnt from: haslinghuis
PR: betaflight/config#822
File: configs/AXISFLYINGH7MINI/config.h:29-37
Timestamp: 2025-06-23T18:43:31.746Z
Learning: In Betaflight configuration files, feature enablement macros like USE_MAG are build options that can be controlled at compile time, while hardware instance definitions like MAG_I2C_INSTANCE are predefined in board configurations to assist with hardware mapping when those features are enabled at build time.
Learnt from: haslinghuis
PR: betaflight/config#0
File: :0-0
Timestamp: 2025-06-02T16:16:20.197Z
Learning: In STM32F405-based flight controller configurations, timer pin mappings must be carefully analyzed for DMA stream conflicts, especially between motor timers, LED strip timers, and SPI DMA assignments. Changes to TIMER_PIN_MAPPING should include verification that all required peripherals (motors, LED strip, blackbox SPI) can coexist without DMA conflicts.
Learnt from: haslinghuis
PR: betaflight/config#822
File: configs/AXISFLYINGH7MINI/config.h:121-129
Timestamp: 2025-06-23T18:44:59.162Z
Learning: In Betaflight configuration files, USE_OSD_HD and USE_MAX7456 are for different OSD systems: USE_MAX7456 enables the MAX7456 analog OSD chip, while USE_OSD_HD enables HD/digital OSD via MSP. MSP_DISPLAYPORT_UART should be guarded by USE_OSD_HD, not USE_MAX7456, as they serve different OSD implementations.
Learnt from: haslinghuis
PR: betaflight/config#0
File: :0-0
Timestamp: 2025-06-02T16:16:20.197Z
Learning: For Betaflight configurations, blackbox logging via SPI3 and LED_STRIP functionality can be mutually exclusive due to DMA stream conflicts on STM32F4 targets. This hardware limitation should be identified during timer configuration reviews.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/FLYWOOF411/config.h:33-33
Timestamp: 2025-05-28T15:48:18.449Z
Learning: The FLYWOOF411 board does not actually use dual gyros despite having GYRO_2_SPI_INSTANCE defined in its configuration. It was incorrectly targeted for GYRO_COUNT and dual gyro support.
Learnt from: haslinghuis
PR: betaflight/config#814
File: configs/JHEF405PRO/config.h:109-109
Timestamp: 2025-06-08T22:02:28.961Z
Learning: The JHEF405PRO board does not actually use dual gyros despite having GYRO_2_SPI_INSTANCE defined in its configuration. It should not receive GYRO_COUNT or other dual-gyro related definitions since only the first gyro is supported.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/MERAKRCF722/config.h:32-32
Timestamp: 2025-05-28T15:45:15.608Z
Learning: The presence of GYRO_2_SPI_INSTANCE definition in a board config does not necessarily mean the board uses dual gyros. Some boards have GYRO_2_SPI_INSTANCE defined but it's not actually used, so they should not receive GYRO_COUNT or other dual-gyro related definitions. Only boards that actually utilize dual gyros should get these definitions.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/BEEROTORF4/config.h:30-30
Timestamp: 2025-05-28T15:42:05.402Z
Learning: The DEFAULT_GYRO_ENABLED macro with both gyros enabled (GYRO_MASK(0) | GYRO_MASK(1)) should only be added to board configurations that have DEFAULT_GYRO_TO_USE set to GYRO_CONFIG_USE_GYRO_BOTH. Boards without this setting should only get the GYRO_COUNT definition to specify the number of available gyros.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/BEEROTORF4/config.h:30-30
Timestamp: 2025-05-28T15:42:05.402Z
Learning: The DEFAULT_GYRO_ENABLED macro with both gyros enabled (GYRO_MASK(0) | GYRO_MASK(1)) should only be added to board configurations that have DEFAULT_GYRO_TO_USE set to GYRO_CONFIG_USE_GYRO_BOTH. Boards without this setting should only get the GYRO_COUNT definition.
Learnt from: haslinghuis
PR: betaflight/config#798
File: configs/FURYF4OSD/config.h:88-88
Timestamp: 2025-05-31T17:01:39.423Z
Learning: For STM32F4xx platforms, PB1 pin timer definitions are:
1 = DEF_TIM(TIM1, CH3N, PB1, 0, 0)
2 = DEF_TIM(TIM3, CH4, PB1, 0, 0)
3 = DEF_TIM(TIM8, CH3N, PB1, 0, 0)
Timer instance 2 (TIM3, CH4) is the correct mapping for PB1 motor control on STM32F4xx platforms as defined in src/platform/STM32/timer_stm32f4xx.c
configs/BROTHERHOBBYF722/config.h (11)
Learnt from: haslinghuis
PR: betaflight/config#0
File: :0-0
Timestamp: 2025-06-02T16:16:20.197Z
Learning: In STM32F405-based flight controller configurations, timer pin mappings must be carefully analyzed for DMA stream conflicts, especially between motor timers, LED strip timers, and SPI DMA assignments. Changes to TIMER_PIN_MAPPING should include verification that all required peripherals (motors, LED strip, blackbox SPI) can coexist without DMA conflicts.
Learnt from: haslinghuis
PR: betaflight/config#822
File: configs/AXISFLYINGH7MINI/config.h:29-37
Timestamp: 2025-06-23T18:43:31.746Z
Learning: In Betaflight configuration files, feature enablement macros like USE_MAG are build options that can be controlled at compile time, while hardware instance definitions like MAG_I2C_INSTANCE are predefined in board configurations to assist with hardware mapping when those features are enabled at build time.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/FLYWOOF411/config.h:33-33
Timestamp: 2025-05-28T15:48:18.449Z
Learning: The FLYWOOF411 board does not actually use dual gyros despite having GYRO_2_SPI_INSTANCE defined in its configuration. It was incorrectly targeted for GYRO_COUNT and dual gyro support.
Learnt from: haslinghuis
PR: betaflight/config#814
File: configs/JHEF405PRO/config.h:109-109
Timestamp: 2025-06-08T22:02:28.961Z
Learning: The JHEF405PRO board does not actually use dual gyros despite having GYRO_2_SPI_INSTANCE defined in its configuration. It should not receive GYRO_COUNT or other dual-gyro related definitions since only the first gyro is supported.
Learnt from: haslinghuis
PR: betaflight/config#822
File: configs/AXISFLYINGH7MINI/config.h:121-129
Timestamp: 2025-06-23T18:44:59.162Z
Learning: In Betaflight configuration files, USE_OSD_HD and USE_MAX7456 are for different OSD systems: USE_MAX7456 enables the MAX7456 analog OSD chip, while USE_OSD_HD enables HD/digital OSD via MSP. MSP_DISPLAYPORT_UART should be guarded by USE_OSD_HD, not USE_MAX7456, as they serve different OSD implementations.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/BEEROTORF4/config.h:30-30
Timestamp: 2025-05-28T15:42:05.402Z
Learning: The DEFAULT_GYRO_ENABLED macro with both gyros enabled (GYRO_MASK(0) | GYRO_MASK(1)) should only be added to board configurations that have DEFAULT_GYRO_TO_USE set to GYRO_CONFIG_USE_GYRO_BOTH. Boards without this setting should only get the GYRO_COUNT definition to specify the number of available gyros.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/MERAKRCF722/config.h:32-32
Timestamp: 2025-05-28T15:45:15.608Z
Learning: The presence of GYRO_2_SPI_INSTANCE definition in a board config does not necessarily mean the board uses dual gyros. Some boards have GYRO_2_SPI_INSTANCE defined but it's not actually used, so they should not receive GYRO_COUNT or other dual-gyro related definitions. Only boards that actually utilize dual gyros should get these definitions.
Learnt from: haslinghuis
PR: betaflight/config#792
File: configs/BEEROTORF4/config.h:30-30
Timestamp: 2025-05-28T15:42:05.402Z
Learning: The DEFAULT_GYRO_ENABLED macro with both gyros enabled (GYRO_MASK(0) | GYRO_MASK(1)) should only be added to board configurations that have DEFAULT_GYRO_TO_USE set to GYRO_CONFIG_USE_GYRO_BOTH. Boards without this setting should only get the GYRO_COUNT definition.
Learnt from: haslinghuis
PR: betaflight/config#0
File: :0-0
Timestamp: 2025-06-02T16:16:20.197Z
Learning: For Betaflight configurations, blackbox logging via SPI3 and LED_STRIP functionality can be mutually exclusive due to DMA stream conflicts on STM32F4 targets. This hardware limitation should be identified during timer configuration reviews.
Learnt from: haslinghuis
PR: betaflight/config#798
File: configs/FURYF4OSD/config.h:88-88
Timestamp: 2025-05-31T17:01:39.423Z
Learning: For STM32F4xx platforms, PB1 pin timer definitions are:
1 = DEF_TIM(TIM1, CH3N, PB1, 0, 0)
2 = DEF_TIM(TIM3, CH4, PB1, 0, 0)
3 = DEF_TIM(TIM8, CH3N, PB1, 0, 0)
Timer instance 2 (TIM3, CH4) is the correct mapping for PB1 motor control on STM32F4xx platforms as defined in src/platform/STM32/timer_stm32f4xx.c
Learnt from: ot0tot
PR: betaflight/config#797
File: configs/VWINF722AIO/config.h:78-82
Timestamp: 2025-06-07T03:25:49.412Z
Learning: BOOT0 on STM32F7 (and other STM32 series) is a dedicated pin, not multiplexed with GPIO pins. GPIO pins like PD2 cannot be BOOT0. Only BOOT1 can sometimes be multiplexed with GPIO pins on some STM32 series.
🔇 Additional comments (5)
configs/BROTHERHOBBYF722/config.h (5)
24-59: LGTM! Standard board configuration with proper pin assignments.The basic board configuration, pin definitions for peripherals, and SPI bus assignments are correctly structured for the STM32F7X2 platform.
157-166: LGTM! Proper conditional guards for UART assignments.The conditional UART assignments correctly use:
USE_OSD_HDguard for MSP displayport (digital OSD)USE_GPSguard for GPS UART- Separate from
USE_MAX7456(analog OSD) as these are different OSD systems
117-130: LGTM! ADC and PINIO configurations are properly structured.The ADC pin assignments, default meter sources and scales, and PINIO configuration follow standard patterns for Betaflight boards.
60-74: Confirm dual gyro support and add missing GYRO_COUNT definitionPlease verify against the board schematics or manufacturer documentation that the BROTHERHOBBYF722 actually populates both ICM42688P sensors. Once confirmed, add the following in
configs/BROTHERHOBBYF722/config.himmediately after theDEFAULT_GYRO_TO_USEline:#define DEFAULT_GYRO_TO_USE GYRO_CONFIG_USE_GYRO_BOTH +#define GYRO_COUNT 2 #define GYRO_1_EXTI_PIN PC4
- File: configs/BROTHERHOBBYF722/config.h
- Insert after line defining
DEFAULT_GYRO_TO_USE
144-156: VERIFY: STM32F7 DMA Stream Assignments for SPI3, Timers, and ADCThe file
configs/BROTHERHOBBYF722/config.honly defines timer-to-pin mappings and setsADC1_DMA_OPT = 0, but does not document which DMA streams/channels each peripheral actually uses on STM32F7. On F7 devices, SPI3 (used for blackbox flash), TIM3_CH3 (SERVO3), TIM8_CH3 (LED_STRIP), motor timers (TIM1/TIM2/TIM5, etc.), and ADC1 can all vie for the same DMA resources. Please manually verify that none of these map to overlapping DMA streams or channels:• SPI3 TX/RX DMA streams (e.g., DMA1_Stream7_Channel0, DMA1_Stream0_Channel0)
• TIM3_CH3 (SERVO3) DMA stream/channel
• TIM8_CH3 (LED_STRIP) DMA stream/channel
• DMA used by motor timers (TIM1/TIM2/TIM5… CHx)
• ADC1 DMA (perADC1_DMA_OPT = 0assignment)Consult the RM0385 (STM32F7 reference manual) DMA stream/channel tables to ensure all assignments are unique or adjust timer remap/DMA settings accordingly.
haslinghuis
force-pushed
the
brotherhobbyf722
branch
from
ae3fb6a to
4e7fc1c
Compare
haslinghuis
force-pushed
the
brotherhobbyf722
branch
from
4e7fc1c to
e68e0ca
Compare
haslinghuis
force-pushed
the
brotherhobbyf722
branch
from
e68e0ca to
0d27ccc
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Summary by CodeRabbit