Synapse

A tiny, annotation-driven pub/sub bus for FIRST Tech Challenge robot code.

Write Nodes that talk to each other through named, typed topics instead of direct references. The orchestrator manages the threads, so @SubscribedTo callbacks and @RunPeriodically loops never block each other, and all hardware-touching code runs on a single dedicated thread — the only safe way to use DcMotorEx, servos, sensors, and bulk reads in an FTC program.

~40 KB JAR. Zero runtime dependencies. R8-minify-safe.

@TeleOp(name = "Demo", group = "Test")
public class DemoOpMode extends SafeOpMode {
    private SafeDevice<DcMotorEx> intake;

    @Override protected void onSafeInit() {
        intake = safeMap.device(DcMotorEx.class, "intake");
        orchestrator.registerNode("intake", new IntakeNode(orchestrator, intake));
        GamepadAdaptor.attach(orchestrator, gamepad1, "g1");
    }

    @Override protected void onSafeLoop() {
        telemetry.addData("power", orchestrator.getLatestValue("intake/power", Double.class).orElse(0.0));
        telemetry.update();
    }

    public static class IntakeNode extends Node {
        IntakeNode(Orchestrator orch, SafeDevice<DcMotorEx> intake) { super(orch); this.intake = intake; }
        private final SafeDevice<DcMotorEx> intake;
        private boolean running;

        @SubscribedTo(topic = "g1/right_bumper/rising")
        @OnHardwareThread
        public void onPress(Boolean v) {
            running = true;
            intake.run(m -> m.setPower(1.0));
        }

        @SubscribedTo(topic = "g1/right_bumper/falling")
        @OnHardwareThread
        public void onRelease(Boolean v) {
            running = false;
            intake.run(m -> m.setPower(0.0));
        }

        @RunPeriodically(hz = 10)
        public void publishState() {
            orchestrator.publish("intake/power", running ? 1.0 : 0.0);
        }
    }
}

Why Synapse?

Pub/sub for FTC isn't new — Heron Robotics showed what it could do for an 18-ball autonomous, and their architecture inspired this one. Synapse takes the same idea and makes it the safest and smallest library in the niche:

• One hardware thread, no exceptions. Every DcMotorEx, Servo, and sensor I/O — whether triggered by a gamepad event, a periodic loop, or a bulk read — funnels through a single dedicated thread. A runtime assertion in SafeOpMode.loop() makes off-thread hardware access fail fast, not silently corrupt your I²C bus.
• Three-layer API. Annotations (@SubscribedTo, @RunPeriodically, @RunnableAction, @OnHardwareThread), a HardwareActions facade (run, call, callAsync, bulkRead), and SafeDevice<T> wrappers. Use whichever matches the call site.
• Backpressure that respects deadlines. Separate pools for periodic and callback work, with a bounded queue and CallerRunsPolicy so a slow subscriber slows the publisher instead of dropping messages. An unbounded action pool keeps one-shot invocations from being rejected under load.
• Zero runtime dependencies. ~40 KB JAR. R8 survival is verified by running the test suite through minification.
• Gamepad-to-topic in one line. GamepadAdaptor.attach(orchestrator, gamepad1, "g1") publishes buttons (current, rising, falling) and axes at 60 Hz.

Why pub/sub for FTC?

Traditional command-based FTC code runs every subsystem on a single loop. It works, but the only way to express "run my intake only when the bumper state changes" and "update my LEDs at 10 Hz" in the same loop is to count ticks manually and hope nothing else is dragging the loop down.

In a pub/sub architecture, those two requirements become two independent subscriptions that the orchestrator schedules on separate pools. A slow callback can't starve your periodic loop, and vice-versa — and any of them can opt in to running on the dedicated hardware thread.

Quickstart

@TeleOp(name = "SynapseDemo", group = "Demo")
public class SynapseDemo extends SafeOpMode {

    @Override
    protected void onSafeInit() {
        SafeDevice<DcMotorEx> left  = safeMap.device(DcMotorEx.class, "leftMotor");
        SafeDevice<DcMotorEx> right = safeMap.device(DcMotorEx.class, "rightMotor");

        orchestrator.registerNode("drive", new DriveNode(orchestrator, left, right));
        GamepadAdaptor.attach(orchestrator, gamepad1, "g1");
    }

    @Override
    protected void onSafeLoop() {
        telemetry.update();
    }

    public static class DriveNode extends Node {
        DriveNode(Orchestrator orchestrator, SafeDevice<DcMotorEx> left, SafeDevice<DcMotorEx> right) {
            super(orchestrator);
            this.left = left;
            this.right = right;
        }
        private final SafeDevice<DcMotorEx> left, right;

        @RunPeriodically(hz = 50, hardware = true)
        public void drive() {
            double y = -orchestrator.getLatestValue("g1/left_stick_y", Float.class).map(Float::doubleValue).orElse(0.0);
            double r = -orchestrator.getLatestValue("g1/right_stick_y", Float.class).map(Float::doubleValue).orElse(0.0);
            left.run(m -> m.setPower(y));
            right.run(m -> m.setPower(r));
        }
    }
}

Full walkthrough in the First OpMode docs; a robot-validated drivetrain in the Mecanum drive recipe.

The one rule

All hardware access happens on the hardware thread. Nothing else.

FTC hardware is not thread-safe. Synapse funnels every hardware operation onto one OS thread so races cannot happen by construction, and gives you three layers to route code there:

// Layer 1 — annotations (the binder routes these for you)
@SubscribedTo(topic = "intake/set/power")
@OnHardwareThread
public void onTarget(double power) { intake.run(m -> m.setPower(power)); }

@RunPeriodically(hz = 50, hardware = true)
public void drive() { left.raw().setPower(powerFL); }   // already on the thread

// Layer 2 — the HardwareActions facade, from anywhere else
hardware.run(() -> motor.setPower(0.5));
double pos = hardware.call(() -> motor.getCurrentPosition());

// Layer 3 — SafeDevice wrappers
SafeDevice<DcMotorEx> intake = safeMap.device(DcMotorEx.class, "intake");
intake.run(m -> m.setPower(0.5));

And the mirror rule: code already on the hardware thread must never block waiting for it. Calling hardware.call(...) / device.call(...) from inside a hardware = true loop, an @OnHardwareThread subscriber, or a bulk-read reader deadlocks the robot — use device.raw() there.

Concepts

Topics

A topic is a named, typed channel. Create explicitly with orchestrator.getOrCreateTopic(name, type) (recommended for anything shared — it pins the type in one place) or implicitly on first publish. Read back with orchestrator.getLatestValue(name, type), which returns an Optional.

Types are checked with assignability, and primitives and wrappers are normalized — a double parameter binds cleanly to a Double topic.

Subscribing

Three ways, pick per call site:

// 1) Programmatic — returns a Subscription you can unsubscribe later.
orchestrator.subscribe("intake/set/power", Double.class,
        p -> intake.run(m -> m.setPower(p)));

// 2) Annotation — declared on a Node method, wired at registerNode.
@SubscribedTo(topic = "intake/set/power")
public void onSetPower(double power) { target = power; }

// 3) Fetch the latest value on demand — no subscription needed.
Optional<Double> latest = orchestrator.getLatestValue("intake/set/power", Double.class);

Periodic loops

@RunPeriodically(hz = 50)                    // scheduler pool (8 threads)
public void update() { /* math */ }

@RunPeriodically(hz = 50, hardware = true)   // the hardware thread
public void drive() { motor.raw().setPower(...); }

Fixed-delay scheduling: the next run starts 1000 / hz ms after the previous finishes, so slow loops never overlap and the effective rate is hz or lower. Exceptions are logged; the loop keeps running.

Hardware-thread API

HardwareActions hw = orchestrator.hardware();

hw.run(() -> motor.setPower(0.5));                      // async
double pos = hw.call(() -> motor.getCurrentPosition()); // blocks caller
CompletableFuture<Double> f = hw.callAsync(() -> motor.getCurrent(CurrentUnit.AMPS));

hw.bulkRead(50, view -> {
    double amps = motor.getCurrent(CurrentUnit.AMPS);   // on the hardware thread
    view.publish("motor/amps", amps);
});

Gamepad

GamepadAdaptor.attach(orchestrator, gamepad1, "g1") pre-creates and publishes at 60 Hz:

Topic	Type	Meaning
g1/<button>	Boolean	current state, every poll
g1/<button>/rising	Boolean	fires (value=true) on 0→1 transition
g1/<button>/falling	Boolean	fires on 1→0 transition
g1/<axis>	Float	current value

Every public non-static boolean/float field of the SDK Gamepad is picked up automatically — 27 buttons and 10 axes on SDK 11.2, including touchpad and *_trigger_pressed fields — and future SDK fields appear with no code change.

Threading model

The orchestrator runs four distinct workers, each chosen for a specific role:

Pool	Threads	Bounded?	Used for
Scheduler	8	—	@RunPeriodically loops (non-hardware)
Callback	4–16	256	@SubscribedTo handlers (with backpressure)
Action	unbounded	no	@RunnableAction invocations
Hardware	1 (dedicated)	—	All hardware reads/writes

A slow subscriber can't starve a periodic loop — they run on separate pools. When the callback queue fills, CallerRunsPolicy runs the overflow on the publisher's thread (backpressure instead of dropped messages). Exceptions in subscribers, loops, and actions are logged and never crash the OpMode.

Installation

Synapse is published to Maven Central, which needs no authentication — the standard FtcRobotController template already includes mavenCentral() in its repositories, so adding the dependency is all it takes:

dependencies {
    implementation 'com.aaravlabs:synapse:0.4.0'
    // ... your other FTC deps
}

Alternative: GitHub Packages mirror

Synapse is also mirrored on GitHub Packages (maven.pkg.github.com/IamCoder18/synapse) — useful if your organization already authenticates against GitHub. That mirror requires a personal access token (classic) with the read:packages scope even for public packages (a GitHub restriction, not a Synapse one). If in doubt, use Maven Central above.

Add this to build.dependencies.gradle:

repositories {
    mavenCentral()
    google()
    maven {
        url = uri("https://maven.pkg.github.com/IamCoder18/synapse")
        credentials {
            username = findProperty("githubUser") ?: System.getenv("GITHUB_USER") ?: System.getenv("GITHUB_ACTOR")
            password = findProperty("githubToken") ?: System.getenv("GITHUB_TOKEN")
        }
    }
}

dependencies {
    implementation 'com.aaravlabs:synapse:0.4.0'
    // ... your other FTC deps
}

and configure credentials in ~/.gradle/gradle.properties (never commit this file):

githubUser=<your-github-username>
githubToken=<a-token-with-read:packages>

Full walkthrough with the Kotlin DSL and troubleshooting in the Install docs, also served at /docs/get-started/install on the website.

API reference

Type	Where	Purpose
Orchestrator	com.aaravlabs.synapse	The bus. One per robot.
Node	com.aaravlabs.synapse	An independent unit of code with annotated callbacks.
Topic<T>	com.aaravlabs.synapse	A named, typed channel.
Subscription	com.aaravlabs.synapse	Handle returned by subscribe().
LogSink	com.aaravlabs.synapse	Pluggable logging output.
@SubscribedTo	com.aaravlabs.synapse.annotation	Callback on every published value.
@RunPeriodically	com.aaravlabs.synapse.annotation	Loop at a fixed frequency.
@RunnableAction	com.aaravlabs.synapse.annotation	One-shot, named, fire-on-demand.
@OnHardwareThread	com.aaravlabs.synapse.annotation	Forces a @SubscribedTo onto the hardware thread.
SafeOpMode	com.aaravlabs.synapse.ftc	Drop-in OpMode base class.
FtcOrchestrator	com.aaravlabs.synapse.ftc	Factory that wires android.util.Log into a LogSink.
HardwareActions	com.aaravlabs.synapse.ftc	run / call / callAsync / bulkRead.
SafeDevice<T>	com.aaravlabs.synapse.ftc	Hardware wrapper that routes through the hardware thread.
SafeHardwareMap	com.aaravlabs.synapse.ftc	HardwareMap that produces SafeDevice<T>s.
GamepadAdaptor	com.aaravlabs.synapse.ftc	Reflects Gamepad fields into topics.
BulkReader	com.aaravlabs.synapse.ftc	Functional interface for bulkRead.
HardwareView	com.aaravlabs.synapse.ftc	Publish/read surface inside a bulk-read callback.
AndroidLogSink	com.aaravlabs.synapse.ftc	LogSink forwarding to android.util.Log.

Testing & development

The library ships with 51 JUnit 5 tests covering topics, subscriptions, periodic loops, two-pool isolation, hardware-thread serial execution, soak tests, race conditions, and the real-FTC-SDK Gamepad field set.

./gradlew test                       # run the test suite
./gradlew javadoc                    # build the Javadoc
./gradlew publishToMavenLocal        # install into ~/.m2 for experimentation

Requirements: JDK 11+, Gradle 9.x.

A real working TeleOp that exercises the library on a competition robot (mecanum drive + intake subsystems) is in ATAARobotics/23684-Canopy-Biobuzz PR #3.

Contributing

Issues and PRs welcome. See CONTRIBUTING.md for the workflow, CODE_OF_CONDUCT.md for the code of conduct, and CHANGELOG.md for the version history.

License

MIT

Credits

Created and maintained by IamCoder18.