Error applying refresh rate when initiating specific profile.

[sander1990]

Greetings!

Extremely satisfied with DisplayProfileManager. However, I am having an issue where one of the monitors are not able to set the refresh rate as shown in the screenshot. I can do it manually in the settings in Windows, but for some reason I am unable to do so in DisplayProfileManager.

What I am trying to achieve is:

Profile 1: PC (two monitors. Main 3840x2160 120Hz HDR. Secondary 1080x1920 180Hz SDR.) <- Default profile.
Profile 2: TV (one TV. 3840x2160 120Hz HDR)

No issue going from Profile 1 -> Profile 2, but going back from Profile 2 to Profile 1 gives me error message on applying refresh rate on secondary monitor and applies 60Hz only. I have to manually go to settings in Windows and set the refresh rate to 180Hz.

I have tried checking the logs, but does not give me a proper trouble shooting error. Log attached.

DisplayProfileManager-2025-12-09.log

Here is relevant screenshot:

[sander1990]

Hi @zac15987 - Do you have any suggestions to solve this?

[dwalx720]

I'm having the same issues here with a very similar setup. I would really appreciate a fix/ patch for this too. I'm almost the same setup as you.. My main "desk" profile 1440p - 360hz monitor always switches back to 120hz. My second 1080P monitor (also in the desk profile) switches to back to 60hz from 240hz.. And on my "TV only profile" the 4k tv only achieves 120hz when its on 1440p. So I have it set like that in the program, but it ALWAYS reverts back to 4k60 and also resets the scaling with it too whenever I switch.

[Joelg200169]

Im having the same problem it only started after I swapped out my 3080ti for a amd 9070xt, tried re installing and remaking the profiles but still not working

[Smidbuks123]

I'm having the same issue