V 17.0.0 dev c5 factory reset not working

[djmaus-build]

What happened?

Latest v5 build ( main ) 260751
Can't resets led outputs to default ( second output ) try factory reset also not working
( clear memory bug ? )
Esp32c5 dev 4mb

To Reproduce Bug

Set 2 outputs ws2812 and try to clear led settings , any change after wil not stored .
Reboot , and factory reset not working .
Solution is to clear and re-flash device .

Expected Behavior

Factory reset to start over

Install Method

Self-Compiled

What version of WLED?

Wled v17.0.0 devV5 "kagayaki" esp32c5

Which microcontroller/board are you seeing the problem on?

ESP32-C5 (experimental)

Relevant log/trace output

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[softhack007]

Thanks for the bug report. Actually factory reset was never tested on C5, we'll need to look into it.

Set 2 outputs ws2812

Not sure if two outputs do work on the C5. We had some problems with multi-output on this MCU. Which pins did you configure for the two ws2812b strips?

[DedeHai]

guess I need to order a C5 ;)

[djmaus-build]

@softhack007 yes 2 ws2812b strips , config pin 4 and pin 5 ( second output was already reported as non working but I'll keep testing it 😄 )
With 1 pin as led output its relative stable )

@DedeHai a good choice , 5ghz is a stable connection 💪

[DedeHai]

@djmaus-build it was a hidden reference to PR #5704