Support GL1C please.. :)

[bashNRW]

Your script is great. Will there be support for the GL1C?

Unfortunately I now get this on and off and unfortunately nothing else works.

Best regards

[taburineagle]

Thank you @bashNRW! The GL1C should have support for control via NeewerLite-Python - are you saying it just turns it on and off, but nothing else works?

[bashNRW]

Correct, on and off works. But otherwise I can't do anything. Have all the commands tested (by browser) and nothing is accepted.

[taburineagle]

Try the latest version of NeewerLite-Python.py and see if that works - I changed the send mode from "Infinity-esque" to "Infinity" - if that doesn't work, I'm not sure. Maybe Neewer came out with a different protocol that changed some things?

[bashNRW]

Ok, great, that's it. :)
GLOBAL PRESET works..

Now the only question is, how do I control all the FX settings?
There are 18 pre-saved ones in the standard software such as police lights etc

With http://127.0.0.1:8080/NeewerLite-Python/doAction?light=*&mode=scene&scene=10 It only flashes blue, but without red in between

Edit: Ok, found it out. With http://127.0.0.1:8080/NeewerLite-Python/doAction?light=*&mode=scene&scene=21 it worked :D