Bus pirate not working

[kkey00]

avrdude -c buspirate -P /dev/ttyUSB2 -p x128d4 -vv

avrdude: Version 6.3
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "/etc/avrdude.conf"
     User configuration file is "/home/kaitk/.avrduderc"
     User configuration file does not exist or is not a regular file, skipping

     Using Port                    : /dev/ttyUSB2
     Using Programmer              : buspirate
     AVR Part                      : ATxmega128D4
     Chip Erase delay              : 0 us
     PAGEL                         : P00
     BS2                           : P00
     RESET disposition             : dedicated
     RETRY pulse                   : SCK
     serial program mode           : yes
     parallel program mode         : yes
     Timeout                       : 0
     StabDelay                     : 0
     CmdexeDelay                   : 0
     SyncLoops                     : 0
     ByteDelay                     : 0
     PollIndex                     : 0
     PollValue                     : 0x00
     Memory Detail                 :

                              Block Poll               Page                       Polled
       Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
       ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
       signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
       prodsig        0     0     0    0 no         50   50      0     0     0 0x00 0x00
       fuse1          0     0     0    0 no          1    0      0     0     0 0x00 0x00
       fuse2          0     0     0    0 no          1    0      0     0     0 0x00 0x00
       fuse4          0     0     0    0 no          1    0      0     0     0 0x00 0x00
       fuse5          0     0     0    0 no          1    0      0     0     0 0x00 0x00
       lock           0     0     0    0 no          1    0      0     0     0 0x00 0x00
       data           0     0     0    0 no          0    0      0     0     0 0x00 0x00
       eeprom         0     0     0    0 no       2048   32      0     0     0 0x00 0x00
       application    0     0     0    0 no     131072  512      0     0     0 0x00 0x00
       apptable       0     0     0    0 no       8192  512      0     0     0 0x00 0x00
       boot           0     0     0    0 no       8192  512      0     0     0 0x00 0x00
       flash          0     0     0    0 no     139264  512      0     0     0 0x00 0x00
       usersig        0     0     0    0 no        512  512      0     0     0 0x00 0x00

     Programmer Type : BusPirate
     Description     : The Bus Pirate

Attempting to initiate BusPirate binary mode...
BusPirate binmode version: 1
BusPirate SPI version: 1
avrdude: Paged flash write enabled.
AVR Extended Commands not found.
program enable instruction not defined for part "ATxmega128D4"
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.

avrdude: ser_recv(): programmer is not responding
BusPirate is back in the text mode

avrdude done. Thank you.

Whenever I try to initialize I get this message. I have tried multiple pinouts for my tagret however all of them give me the same result. Any help would be appreciated