app.toml

# This is a TOML config file.
# For more information, see https://github.com/toml-lang/toml

###############################################################################
###                           Base Configuration                            ###
###############################################################################

# The minimum gas prices a validator is willing to accept for processing a
# transaction. A transaction's fees must meet the minimum of any denomination
# specified in this config (e.g. 0.25token1;0.0001token2).
minimum-gas-prices = "0.02usei"

# Pruning Strategies:
# - default: Keep the recent 362880 blocks and prune is triggered every 10 blocks
# - nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
# - everything: all saved states will be deleted, storing only the recent 2 blocks; pruning at every block
# - custom: allow pruning options to be manually specified through 'pruning-keep-recent' and 'pruning-interval'
# Pruning strategy is completely ignored when seidb is enabled
pruning = "nothing"

# These are applied if and only if the pruning strategy is custom, and seidb is not enabled
pruning-keep-recent = "0"
pruning-keep-every = "0"
pruning-interval = "3593"

# HaltHeight contains a non-zero block height at which a node will gracefully
# halt and shutdown that can be used to assist upgrades and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-height = 0

# HaltTime contains a non-zero minimum block time (in Unix seconds) at which
# a node will gracefully halt and shutdown that can be used to assist upgrades
# and testing.
#
# Note: Commitment of state will be attempted on the corresponding block.
halt-time = 0

# MinRetainBlocks defines the minimum block height offset from the current
# block being committed, such that all blocks past this offset are pruned
# from Tendermint. It is used as part of the process of determining the
# ResponseCommit.RetainHeight value during ABCI Commit. A value of 0 indicates
# that no blocks should be pruned.
#
# This configuration value is only responsible for pruning Tendermint blocks.
# It has no bearing on application state pruning which is determined by the
# "pruning-*" configurations.
#
# Note: Tendermint block pruning is dependant on this parameter in conunction
# with the unbonding (safety threshold) period, state pruning and state sync
# snapshot parameters to determine the correct minimum value of
# ResponseCommit.RetainHeight.
min-retain-blocks = 0

# InterBlockCache enables inter-block caching.
inter-block-cache = true

# IndexEvents defines the set of events in the form {eventType}.{attributeKey},
# which informs Tendermint what to index. If empty, all events will be indexed.
#
# Example:
# ["message.sender", "message.recipient"]
index-events = []

# IavlCacheSize set the size of the iavl tree cache.
# Default cache size is 50mb.
iavl-cache-size = 781250

# IAVLDisableFastNode enables or disables the fast node feature of IAVL.
# Default is true.
iavl-disable-fastnode = true

# CompactionInterval sets (in seconds) the interval between forced levelDB
# compaction. A value of 0 means no forced levelDB.
# Default is 0.
compaction-interval = 0

# deprecated
no-versioning = false

# Whether to store orphan data (to-be-deleted data pointers) outside the main
# application LevelDB
separate-orphan-storage = false

# if separate-orphan-storage is true, how many versions of orphan data to keep
separate-orphan-versions-to-keep = 0

# if separate-orphan-storage is true, how many orphans to store in each file
num-orphan-per-file = 0

# if separate-orphan-storage is true, where to store orphan data
orphan-dir = ""

# concurrency-workers defines how many workers to run for concurrent transaction execution
concurrency-workers = 500

# occ-enabled defines whether OCC is enabled or not for transaction execution
occ-enabled = true

###############################################################################
###                         Telemetry Configuration                         ###
###############################################################################

[telemetry]

# Prefixed with keys to separate services.
service-name = ""

# Enabled enables the application telemetry functionality. When enabled,
# an in-memory sink is also enabled by default. Operators may also enabled
# other sinks such as Prometheus.
enabled = true

# Enable prefixing gauge values with hostname.
enable-hostname = false

# Enable adding hostname to labels.
enable-hostname-label = false

# Enable adding service to labels.
enable-service-label = false

# PrometheusRetentionTime, when positive, enables a Prometheus metrics sink.
prometheus-retention-time = 7200

# GlobalLabels defines a global set of name/value label tuples applied to all
# metrics emitted using the wrapper functions defined in telemetry package.
#
# Example:
# [["chain_id", "cosmoshub-1"]]
global-labels = [
]

###############################################################################
###                           API Configuration                             ###
###############################################################################

[api]

# Enable defines if the API server should be enabled.
enable = true

# Swagger defines if swagger documentation should automatically be registered.
swagger = true

# Address defines the API server to listen on.
address = "tcp://0.0.0.0:1317"

# MaxOpenConnections defines the number of maximum open connections.
max-open-connections = 1000

# RPCReadTimeout defines the Tendermint RPC read timeout (in seconds).
rpc-read-timeout = 10

# RPCWriteTimeout defines the Tendermint RPC write timeout (in seconds).
rpc-write-timeout = 0

# RPCMaxBodyBytes defines the Tendermint maximum response body (in bytes).
rpc-max-body-bytes = 1000000

# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
enabled-unsafe-cors = false

###############################################################################
###                           Rosetta Configuration                         ###
###############################################################################

[rosetta]

# Enable defines if the Rosetta API server should be enabled.
enable = false

# Address defines the Rosetta API server to listen on.
address = ":8080"

# Network defines the name of the blockchain that will be returned by Rosetta.
blockchain = "app"

# Network defines the name of the network that will be returned by Rosetta.
network = "network"

# Retries defines the number of retries when connecting to the node before failing.
retries = 3

# Offline defines if Rosetta server should run in offline mode.
offline = false

###############################################################################
###                           gRPC Configuration                            ###
###############################################################################

[grpc]

# Enable defines if the gRPC server should be enabled.
enable = true

# Address defines the gRPC server address to bind to.
address = "0.0.0.0:9090"

###############################################################################
###                        gRPC Web Configuration                           ###
###############################################################################

[grpc-web]

# GRPCWebEnable defines if the gRPC-web should be enabled.
# NOTE: gRPC must also be enabled, otherwise, this configuration is a no-op.
enable = true

# Address defines the gRPC-web server address to bind to.
address = "0.0.0.0:9091"

# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
enable-unsafe-cors = false

###############################################################################
###                        State Sync Configuration                         ###
###############################################################################

# State sync snapshots allow other nodes to rapidly join the network without replaying historical
# blocks, instead downloading and applying a snapshot of the application state at a given height.
[state-sync]

# snapshot-interval specifies the block interval at which local state sync snapshots are
# taken (0 to disable). Must be a multiple of pruning-keep-every.
snapshot-interval = 0

# snapshot-keep-recent specifies the number of recent snapshots to keep and serve (0 to keep all).
snapshot-keep-recent = 2

# snapshot-directory sets the directory for where state sync snapshots are persisted.
# default is emtpy which will then store under the app home directory same as before.
snapshot-directory = ""


#############################################################################
###                             SeiDB Configuration                       ###
#############################################################################

[state-commit]
# Enable defines if the SeiDB should be enabled to override existing IAVL db backend.
sc-enable = true

# Defines the SC store directory, if not explicitly set, default to application home directory
sc-directory = ""

# ZeroCopy defines if memiavl should return slices pointing to mmap-ed buffers directly (zero-copy),
# the zero-copied slices must not be retained beyond current block's execution.
# the sdk address cache will be disabled if zero-copy is enabled.
sc-zero-copy = false

# AsyncCommitBuffer defines the size of asynchronous commit queue, this greatly improve block catching-up
# performance, setting to 0 means synchronous commit.
sc-async-commit-buffer = 100

# KeepRecent defines how many state-commit snapshots (besides the latest one) to keep
# defaults to 1 to make sure ibc relayers work.
sc-keep-recent = 1

# SnapshotInterval defines the block interval the snapshot is taken, default to 10000 blocks.
sc-snapshot-interval = 10000

# SnapshotWriterLimit defines the max concurrency for taking commit store snapshot
sc-snapshot-writer-limit = 0

[state-store]
# Enable defines whether the state-store should be enabled for storing historical data.
# Supporting historical queries or exporting state snapshot requires setting this to true
# This config only take effect when SeiDB is enabled (sc-enable = true
ss-enable = true

# Defines the directory to store the state store db files
# If not explicitly set, default to application home directory
ss-db-directory = ""

# DBBackend defines the backend database used for state-store.
# Supported backends: pebbledb, rocksdb
# defaults to pebbledb (recommended)
ss-backend = "pebbledb"

# AsyncWriteBuffer defines the async queue length for commits to be applied to State Store
# Set <= 0 for synchronous writes, which means commits also need to wait for data to be persisted in State Store.
# defaults to 100 for asynchronous writes
ss-async-write-buffer = 100

# KeepRecent defines the number of versions to keep in state store
# Setting it to 0 means keep everything
# Default to keep the last 100,000 blocks
ss-keep-recent = 0

# PruneInterval defines the minimum interval in seconds + some random delay to trigger SS pruning.
# It is recommended to trigger pruning less frequently with a large interval.
# default to 600 seconds
ss-prune-interval = 600

# ImportNumWorkers defines the concurrency for state sync import
# defaults to 1
ss-import-num-workers = 1


[wasm]
# This is the maximum sdk gas (wasm and storage) that we allow for any x/wasm "smart" queries
query_gas_limit = 300000
# This is the number of wasm vm instances we keep cached in memory for speed-up
# Warning: this is currently unstable and may lead to crashes, best to keep for 0 unless testing locally
lru_size = 0

[evm]
# controls whether an HTTP EVM server is enabled
http_enabled = true
http_port = 8545

# controls whether a websocket server is enabled
ws_enabled = true
ws_port = 8546

# ReadTimeout is the maximum duration for reading the entire
# request, including the body.
# Because ReadTimeout does not let Handlers make per-request
# decisions on each request body's acceptable deadline or
# upload rate, most users will prefer to use
# ReadHeaderTimeout. It is valid to use them both.
read_timeout = "30s"

# ReadHeaderTimeout is the amount of time allowed to read
# request headers. The connection's read deadline is reset
# after reading the headers and the Handler can decide what
# is considered too slow for the body. If ReadHeaderTimeout
# is zero, the value of ReadTimeout is used. If both are
# zero, there is no timeout.
read_header_timeout = "30s"

# WriteTimeout is the maximum duration before timing out
# writes of the response. It is reset whenever a new
# request's header is read. Like ReadTimeout, it does not
# let Handlers make decisions on a per-request basis.
write_timeout = "3600s"

# IdleTimeout is the maximum amount of time to wait for the
# next request when keep-alives are enabled. If IdleTimeout
# is zero, the value of ReadTimeout is used. If both are
# zero, ReadHeaderTimeout is used.
idle_timeout = "2m0s"

# Maximum gas limit for simulation
simulation_gas_limit = 10000000

# Timeout for EVM call in simulation
simulation_evm_timeout = "1m0s"

# list of CORS allowed origins, separated by comma
cors_origins = "*"

# list of WS origins, separated by comma
ws_origins = "*"

# timeout for filters
filter_timeout = "2m0s"

# checkTx timeout for sig verify
checktx_timeout = "5s"

# controls whether to have txns go through one by one
slow = false

# Deny list defines list of methods that EVM RPC should fail fast
deny_list = ["debug_traceBlockByNumber"]

# max number of logs returned if block range is open-ended
max_log_no_block = 10000

# max number of blocks to query logs for
max_blocks_for_log = 2000

# max number of concurrent NewHead subscriptions
max_subscriptions_new_head = 10000

# max number of concurrent debug_trace calls
max_concurrent_trace_calls = 10

# max number of blocks allowed to look back for tracing
max_trace_lookback_blocks = 10000

# timeout for each trace call
trace_timeout = "30s"

[eth_replay]
eth_replay_enabled = false
eth_rpc = "http://44.234.105.54:18545"
eth_data_dir = "/root/.ethereum/chaindata"
eth_replay_contract_state_checks = false

[eth_blocktest]
eth_blocktest_enabled = false
eth_blocktest_test_data_path = "~/testdata/"

[evm_query]
evm_query_gas_limit = 300000