The added IK Rig exponentially increases in size if you + - + - + the IK rig button

[Hunanbean]

Steps:
Import a model with skeleton (i used default no toes)
Press the IK Rig + button

Press the IK Rig - button
it is removed

Press the IK Rig + button again

Press the IK Rig - button
it is removed

Press the IK Rig + button again

Thank you for your continuing work

[joepal1976]

Well that certainly doesn't look optimal. :-)

[Palmer-JC]

I do not think anything can be done about this. The function does not set the size, but rather scales. Multiple scales are cumulative. My experience is that they should be thinner & thinner though.

…

On Mon, Jan 4, 2021 at 8:26 AM Joel Palmius ***@***.***> wrote: Well that certainly doesn't look optimal. :-) — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#92 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AB4MUY72ZWGKLDQBDSU7W5LSYG6ZLANCNFSM4VRVTXRA> .

[Hunanbean]

Oh. That is unfortunate. Ok. Thanks for the information and the continued hard work you all put into this project :)

…

On Tue, Jan 5, 2021 at 9:22 AM Jeff Palmer ***@***.***> wrote: I do not think anything can be done about this. The function does not set the size, but rather scales. Multiple scales are cumulative. My experience is that they should be thinner & thinner though. On Mon, Jan 4, 2021 at 8:26 AM Joel Palmius ***@***.***> wrote: > Well that certainly doesn't look optimal. :-) > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > < #92 (comment) >, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AB4MUY72ZWGKLDQBDSU7W5LSYG6ZLANCNFSM4VRVTXRA > > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#92 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMNVR7AVPYSGONROPQ3FOTLSYNDGHANCNFSM4VRVTXRA> .

[Aranuvir]

The function does not set the size, but rather scales. Multiple scales are cumulative.

This absolutely does not make any sense. Adding and removing an ik-rig should not change scales, size or anything similar. That's definitely a bug in an urgent need to be fixed.
To be honest the rigging stuff is one of the main reasons why I'm still using mhx...

[Palmer-JC]

This just something mostly cosmetic in the viewport display called bbone

Other types are octahedral, stick, envelope, & wire.. The load code sets it to stick or wire. Why I decided to change to this is the bones you grab surround other bones, using bbone allows the size of the display of the bones to change on a bone-by-bone basis.

To do it by UI, goto Pose mode, select bones, and scale BBone. There is not an actual api call, but one of those Blender ops macro types

The code in ikrig.py is:

# make all regular bone slightly smaller, so IK's fit around
unitMult = 0.1 * self.rigInfo.unitMultplierToExported()
val = 0.6 * unitMult
bpy.ops.transform.transform(mode='BONE_SIZE', value=(val, val, val, 0))

As I said earlier, mine go progressively smaller not larger. I export in meters. Have not played with this since 2.79, other than to make sure it ran in 2.80. Back then, I also tried to reverse it when removing IK, so that if you turned it back on you would get the same result, but did not take.

You can always adjust it down yourself, but that is somehow not an absolute number, or it would always be the same no matter how many times it was done.

[Hunanbean]

Thanks for the functional work around.

…

On Mon, Jan 11, 2021 at 1:20 PM Jeff Palmer ***@***.***> wrote: This just something mostly cosmetic in the viewport display called bbone [image: bbone] <https://user-images.githubusercontent.com/7916131/104237149-a2fdd780-5425-11eb-92f9-00e5cade1790.PNG> Other types are octahedral, stick, envelope, & wire.. The load code sets it to stick or wire. Why I decided to change to this is the bones you grab surround other bones, using bbone allows the size of the display of the bones to change on a bone-by-bone basis. To do it by UI, goto Pose mode, select bones, and scale BBone. There is not an actual api call, but one of those Blender ops macro types [image: BonescalePNG] <https://user-images.githubusercontent.com/7916131/104238058-09372a00-5427-11eb-9e10-7c3d4dccfe04.PNG> The code in ikrig.py is: # make all regular bone slightly smaller, so IK's fit aroundunitMult = 0.1 * self.rigInfo.unitMultplierToExported()val = 0.6 * unitMultbpy.ops.transform.transform(mode='BONE_SIZE', value=(val, val, val, 0)) As I said earlier, mine go progressively smaller not larger. I export in meters. Have not played with this since 2.79, other than to make sure it ran in 2.80. Back then, I also tried to reverse it when removing IK, so that if you turned it back on you would get the same result, but did not take. You can always adjust it down yourself, but that is somehow not an absolute number, or it would always be the same no matter how many times it was done. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#92 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMNVR7GQSL57DPGF5MU3HQLSZNTQDANCNFSM4VRVTXRA> .