From 507aa49a623c71ba9a6ea68390cfb0b8cacf5aea Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 12:49:04 +0900
Subject: [PATCH 1/6] =?UTF-8?q?CLAUDE.md=20=EA=B0=B1=EC=8B=A0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 CLAUDE.md            | 81 ++++++++++----------------------------------
 docs/wiki/index.html |  2 +-
 2 files changed, 19 insertions(+), 64 deletions(-)

diff --git a/CLAUDE.md b/CLAUDE.md
index 6cf8d1e..64989ae 100644
--- a/CLAUDE.md
+++ b/CLAUDE.md
@@ -1,71 +1,26 @@
-# MORT 프로젝트 작업 규약
+# MORT 작업 규약 — 원본은 AGENTS.md
 
-## 프로젝트 성격
-MORT는 2013년부터 이어진 장기 유지보수 프로젝트로, **옛날 방식과 현재 방식이 한 코드베이스 안에 혼재**되어 있다. 사용자 설정 파일 호환성, 기존 사용자층 보호, 점진적 리팩터링 중인 상태이기 때문에 한 번에 정리할 수 없다.
+이 저장소의 작업 규약 원본은 **`AGENTS.md`** 하나뿐이다. Claude Code는 보조 도구이며,
+Codex가 쓰는 `AGENTS.md`의 정의를 그대로 따른다.
 
-## 작업 원칙
+## 작업 시작 전
 
-### 1. 통일하려 들지 말 것
-- 작업 요청 범위를 벗어나서 "낡았으니 정리하자"는 식의 리팩터링 금지
-- 사용자가 명시적으로 요청할 때만 패턴을 통일한다
-- 버그 픽스/기능 추가는 **주변 코드 스타일을 그대로 따른다**
-- Newtonsoft.Json과 System.Text.Json이 같이 쓰여도, RestSharp와 HttpClient가 같이 쓰여도 통일하지 말 것
+**어떤 작업이든 시작하기 전에 `AGENTS.md`를 읽고 그 내용을 그대로 적용한다.**
+이 파일에 규약 본문이 없다고 해서 제약이 없는 것이 아니다.
 
-### 2. 싱글톤과 DI 공존
-- `OcrManager.Instace`, `FormManager.Instace`, `TransManager._instance` 같은 싱글톤과 `Program.ServiceContainer`, `ConfigureServices`의 DI는 **공존하는 게 정상**
-- 새 매니저/서비스를 만들 땐 DI 우선
-- 기존 매니저를 호출할 땐 싱글톤 접근(`Instace`)을 자연스럽게 써도 된다
-- `TransManager`처럼 DI로 등록되어 있지만 `_instance`도 같이 유지하는 하이브리드 패턴도 OK
+`AGENTS.md`가 정하는 것:
+- 작업 원칙 6개 (통일 금지 / 싱글톤·DI 공존 / 호환성 구조 동결 / 거대 파일 불가침 /
+  새 기능 추가 위치 / `Resources/localize.csv` 직접 수정 금지)
+- 프로젝트 구조와 빌드 조건
+- 구현 위키(`docs/wiki/`) 유지 절차
 
-### 3. 호환성 묶인 구조 보존 (절대 변경 금지)
-- `SettingManager.TransType` enum 순서 (`google_url`, `db`, `papago_web`, `naver`, `google`, `deepl`, `deeplApi`, `gemini`, `ezTrans`, `customApi`)
-- `SettingManager.OcrType` enum 순서 (`Tesseract=0`, `Window=1`, `OneOcr=2`, `Google=3`, `EasyOcr=4`)
-- `SettingManager.Skin` enum 순서 (`dark`, `layer`, `over`)
-- `@KEY ` 프리픽스 기반 텍스트 키-값 설정 포맷
-- 직렬화 키 이름
-- 코드 주석에도 "앞 소문자 바꾸면 안 됨 -> 기존 버전과 호환성"이라고 명시되어 있음
+## 규약을 바꿔야 할 때
 
-### 4. 거대 파일은 그대로 둠
-점진적 분리 중인 상태로, 손대지 않는다:
-- `Form1.cs` (3441줄)
-- `SettingManager.cs` (1930줄)
-- `UIAdvencedOption.cs` (1190줄)
-- `TransManager.cs` (1246줄)
-- `FormManager.cs` (1152줄)
-- `AdvencedOptionManager.cs` (740줄)
+`AGENTS.md`만 수정한다. 이 파일에는 규약 내용을 옮겨 적지 않는다.
+과거에 두 파일에 같은 내용을 중복해 두었다가 `AGENTS.md`에만 추가된 항목
+(로컬라이즈 CSV 규칙, 구현 위키 유지 절차)이 이쪽에 빠진 채 어긋난 적이 있다.
 
-요청받은 작업 범위 외엔 분리/리팩터링하지 않는다.
+## 이 파일이 담당하는 범위
 
-### 5. 새 기능 추가 위치
-최근 커밋 흐름을 따른다:
-- 비즈니스 로직 → `Service/` (e.g. `Service/Gemini/`, `Service/CustomApi/`)
-- 데이터 모델 → `Model/` (record 타입 선호)
-- DI 등록 → `Program.ConfigureServices`
-- 번역 API → `TransAPI/`
-- OCR API → `OcrApi/`
-
-## 프로젝트 구조 요약
-
-### 솔루션 (5개 프로젝트)
-1. **MORT** — 메인 WinForms 앱 (.NET 9, x64)
-2. **CloudVision** — Google Cloud Vision OCR 래퍼
-3. **GSTrans** — Google Sheets 번역기
-4. **PipeClient** — EzTrans 연동용 IPC
-5. **Updater** — 업데이트 모듈 (AnyCPU)
-
-### 핵심 디렉토리
-- **진입점**: `Program.cs` → DI 구성 → `Form1`
-- **Manager**: `OcrManager`(싱글톤), `TransManager`(DI+싱글톤 하이브리드), `FormManager`(싱글톤), `OCRDataManager`
-- **Service**: `Service/Gemini/`, `Service/CustomApi/`, `Service/TranslateTyp/`, `Service/PythonService/`, `Service/ProcessTranslateService/`
-- **번역 API**: `TransAPI/` (Google, Naver, Papago Web, DeepL, DeepL API, Gemini, EzTrans, CustomAPI)
-- **OCR API**: `OcrApi/OneOcr/`, `OcrApi/WindowOcr/`, `OcrApi/EasyOcr/` (+ Tesseract는 `MORT_CORE.DLL`)
-- **로컬라이즈**: `LocalizeManager/`, `Resources/localize.csv` (ko/en/ja/zh-CN/id/ru/pt/uk/tr)
-
-### 외부 의존성
-- `MORT_CORE.DLL`, `nhocr.DLL` — 별도 C++ 프로젝트, 빌드 후 릴리즈 폴더에 압축해제 필요
-- `Google.GenAI` 패키지는 있지만 Gemini는 직접 REST 호출 사용
-
-### 빌드
-- **x64 전용** (Updater만 AnyCPU)
-- `.NET 9` (`net9.0-windows10.0.22621.0`)
-- WinForms + WPF 동시 사용
+Claude Code 세션에만 해당하는 사항이 생기면 여기에 적는다.
+프로젝트 규약은 여기에 적지 않는다.
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index faf1db8..c1c7114 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size. Fit uses actual glyph cross-size plus spacing only between additional lines, so a single line is not reduced by a full line-leading allowance.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-02T09:32:27Z","sourceFileCount":143,"typeCount":235,"methodCount":1433,"markerCount":57,"coverage":{"eligibleSourceFiles":143,"reflectedSourceFiles":143,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.5,"automaticallyDocumentedFiles":108,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":134},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":16},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":196},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":506},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1691},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":311,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":781,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":794,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":921,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1518,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1837,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1845,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1934,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1948,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2073,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2214,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2227,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2692,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3068,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3441,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":67,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":375,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":550,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":640,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":727,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3631,"updatedUtc":"2026-08-02T08:48:46Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":189,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":193,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":204,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":208,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":222,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":226,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":231,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":235,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":239,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":244,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":248,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":252,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":256,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":260,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":264,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":268,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":272,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":276,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":280,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":284,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":288,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":296,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":321,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":370,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":377,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":383,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":389,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":417,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":437,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":574,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":602,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":612,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":627,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":639,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":653,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":660,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":691,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":709,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":858,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":906,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":911,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":936,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":952,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":996,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1027,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1125,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1130,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1296,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1301,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1306,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1318,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1323,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1328,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1333,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1338,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1376,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1405,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1411,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1431,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1452,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1464,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1476,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1488,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1514,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1526,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1540,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1550,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1573,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1604,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1632,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1643,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1651,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1696,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1706,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1736,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1742,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1754,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1796,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1800,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1824,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1894,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1977,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2024,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2050,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2060,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2066,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2074,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2242,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2258,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2302,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2355,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2392,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2414,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2448,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2453,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2458,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2463,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2471,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2498,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2567,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2575,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2598,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2620,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2642,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2699,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2711,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2728,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2738,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2744,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2760,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2776,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2781,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2790,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2795,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2803,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2805,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2813,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2818,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2827,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2832,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2843,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2863,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2879,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2900,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2938,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2944,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2953,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2961,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2967,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2972,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2977,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":2999,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3180,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3238,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3244,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3250,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3256,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3262,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3268,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3272,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3277,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3285,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3291,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3297,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3303,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3309,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3316,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3322,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3334,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3383,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3401,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3419,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3438,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3454,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3490,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3495,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3500,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3540,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3551,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3556,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3572,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3593,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3601,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3607,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3612,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3618,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4394,"updatedUtc":"2026-06-07T16:18:42Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":309,"updatedUtc":"2026-06-07T16:18:42Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":149,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":155,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":166,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":170,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":209,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":217,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":233,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":239,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":244,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":249,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":254,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":259,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":265,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":270,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":275,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":280,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":285,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":290,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":295,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":300,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":251,"updatedUtc":"2026-08-02T08:41:08Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2025,"updatedUtc":"2026-08-02T09:32:27Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":31,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":34,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":43,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":47,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":51,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":54,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":57,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":58,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":67,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":78,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":219,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":220,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":235,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":278,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":318,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":331,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":346,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":347,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":387,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":410,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":416,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":429,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":435,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":480,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":500,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":518,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":612,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":684,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":733,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":762,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":791,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":799,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":808,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":814,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":872,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":880,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":963,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":986,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1017,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1035,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1043,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1062,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1099,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1113,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1132,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1137,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1371,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"DrawStringWithOutline2","line":1400,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1475,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1536,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1554,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1695,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1701,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1714,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1722,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1742,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1753,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1758,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1763,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1775,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1819,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":1932,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":1939,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":1947,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":1957,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":1964,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":1970,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":1987,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":1991,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":1997,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2002,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2007,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2012,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size. Fit uses actual glyph cross-size plus spacing only between additional lines, so a single line is not reduced by a full line-leading allowance.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-02T14:19:48Z","sourceFileCount":145,"typeCount":243,"methodCount":1437,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","lines":41,"updatedUtc":"2026-08-02T14:19:48Z","category":"비즈니스 서비스","intent":"ImageRecognitionDebugService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Save 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["ImageRecognitionDebugService"],"methods":[{"access":"public","name":"Save","line":19,"signature":"public void Save(ImageRecognitionDebugData data)"}],"dependencies":["MORT.Model.Debug","System","System.IO","System.Text.Json"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"DebugRectangle","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":6},{"kind":"record","name":"ImageRecognitionDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":7},{"kind":"record","name":"OcrAreaDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":17},{"kind":"record","name":"OcrLineDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":26},{"kind":"record","name":"OcrWordDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":32},{"kind":"record","name":"OverlayTextDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":34},{"kind":"record","name":"OverlayLineDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":59},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"ImageRecognitionDebugService","path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","line":8},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":16},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":196},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":506},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1691},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":311,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":781,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":794,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":921,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1518,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1837,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1845,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1934,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1948,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2073,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2214,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2227,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2692,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3068,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3441,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":67,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":375,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":550,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":640,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":727,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3631,"updatedUtc":"2026-08-02T08:48:46Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":189,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":193,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":204,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":208,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":222,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":226,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":231,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":235,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":239,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":244,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":248,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":252,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":256,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":260,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":264,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":268,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":272,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":276,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":280,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":284,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":288,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":296,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":321,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":370,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":377,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":383,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":389,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":417,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":437,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":574,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":602,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":612,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":627,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":639,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":653,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":660,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":691,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":709,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":858,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":906,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":911,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":936,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":952,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":996,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1027,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1125,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1130,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1296,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1301,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1306,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1318,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1323,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1328,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1333,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1338,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1376,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1405,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1411,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1431,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1452,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1464,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1476,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1488,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1514,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1526,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1540,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1550,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1573,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1604,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1632,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1643,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1651,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1696,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1706,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1736,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1742,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1754,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1796,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1800,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1824,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1894,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1977,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2024,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2050,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2060,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2066,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2074,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2242,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2258,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2302,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2355,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2392,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2414,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2448,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2453,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2458,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2463,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2471,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2498,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2567,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2575,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2598,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2620,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2642,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2699,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2711,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2728,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2738,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2744,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2760,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2776,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2781,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2790,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2795,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2803,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2805,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2813,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2818,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2827,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2832,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2843,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2863,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2879,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2900,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2938,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2944,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2953,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2961,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2967,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2972,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2977,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":2999,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3180,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3238,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3244,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3250,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3256,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3262,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3268,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3272,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3277,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3285,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3291,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3297,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3303,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3309,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3316,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3322,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3334,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3383,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3401,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3419,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3438,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3454,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3490,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3495,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3500,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3540,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3551,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3556,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3572,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3593,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3601,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3607,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3612,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3618,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4394,"updatedUtc":"2026-06-07T16:18:42Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":309,"updatedUtc":"2026-06-07T16:18:42Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":149,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":155,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":166,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":170,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":209,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":217,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":233,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":239,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":244,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":249,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":254,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":259,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":265,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":270,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":275,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":280,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":285,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":290,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":295,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":300,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","lines":61,"updatedUtc":"2026-08-02T14:19:20Z","category":"데이터 모델","intent":"DebugRectangle, ImageRecognitionDebugData, OcrAreaDebugData, OcrLineDebugData, OcrWordDebugData, OverlayTextDebugData, OverlayLineDebugData 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["DebugRectangle","ImageRecognitionDebugData","OcrAreaDebugData","OcrLineDebugData","OcrWordDebugData","OverlayTextDebugData","OverlayLineDebugData"],"methods":[{"access":"public","name":"DebugRectangle","line":6,"signature":"public record DebugRectangle(int X, int Y, int Width, int Height)"},{"access":"public","name":"OcrWordDebugData","line":32,"signature":"public record OcrWordDebugData(string Text, DebugRectangle Area)"},{"access":"public","name":"OverlayLineDebugData","line":59,"signature":"public record OverlayLineDebugData(string Text, DebugRectangle Area)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":251,"updatedUtc":"2026-08-02T08:41:08Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","lines":41,"updatedUtc":"2026-08-02T14:19:48Z","category":"비즈니스 서비스","intent":"ImageRecognitionDebugService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Save 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["ImageRecognitionDebugService"],"methods":[{"access":"public","name":"Save","line":19,"signature":"public void Save(ImageRecognitionDebugData data)"}],"dependencies":["MORT.Model.Debug","System","System.IO","System.Text.Json"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2025,"updatedUtc":"2026-08-02T09:32:27Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":31,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":34,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":43,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":47,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":51,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":54,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":57,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":58,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":67,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":78,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":219,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":220,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":235,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":278,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":318,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":331,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":346,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":347,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":387,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":410,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":416,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":429,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":435,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":480,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":500,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":518,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":612,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":684,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":733,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":762,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":791,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":799,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":808,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":814,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":872,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":880,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":963,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":986,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1017,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1035,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1043,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1062,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1099,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1113,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1132,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1137,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1371,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"DrawStringWithOutline2","line":1400,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1475,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1536,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1554,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1695,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1701,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1714,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1722,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1742,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1753,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1758,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1763,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1775,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1819,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":1932,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":1939,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":1947,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":1957,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":1964,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":1970,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":1987,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":1991,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":1997,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2002,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2007,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2012,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";

From 085b7c83734d8ea0f22a3c262d2e15044540716b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 14:52:36 +0900
Subject: [PATCH 2/6] =?UTF-8?q?=EB=94=94=EB=B2=84=EA=B9=85=20=EA=B8=B0?=
 =?UTF-8?q?=EB=8A=A5=20=EC=B6=94=EA=B0=80,=20=EC=98=A4=EB=B2=84=EB=A0=88?=
 =?UTF-8?q?=EC=9D=B4=20=EC=98=81=EC=97=AD=20=EC=95=88=20=ED=95=A9=EC=B9=98?=
 =?UTF-8?q?=EB=8F=84=EB=A1=9D=20=E3=85=9C=E3=85=85=EC=A0=95?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 MORT/Service/Debug/OcrDebugSnapshotService.cs | 295 ++++++++++++++++++
 .../ProcessTranslateService.cs                |  15 +
 docs/wiki/index.html                          |   2 +-
 3 files changed, 311 insertions(+), 1 deletion(-)
 create mode 100644 MORT/Service/Debug/OcrDebugSnapshotService.cs

diff --git a/MORT/Service/Debug/OcrDebugSnapshotService.cs b/MORT/Service/Debug/OcrDebugSnapshotService.cs
new file mode 100644
index 0000000..f4e9f91
--- /dev/null
+++ b/MORT/Service/Debug/OcrDebugSnapshotService.cs
@@ -0,0 +1,295 @@
+using MORT.Model.Debug;
+using Newtonsoft.Json;
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.IO;
+
+namespace MORT.Service.Debug
+{
+    /// <summary>
+    /// 이미지 인식 결과를 JSON 파일로 남겨 나중에 다시 확인할 수 있게 한다.
+    /// OCR 단계와 오버레이 렌더 단계가 서로 다른 쓰레드에서 끝나기 때문에,
+    /// OCR 결과를 먼저 받아두고 오버레이 스킨일 때만 렌더 값이 채워질 때까지 기다렸다가 저장한다.
+    /// </summary>
+    public class OcrDebugSnapshotService
+    {
+        private const string DirectoryName = "OcrAnalysis";
+
+        private readonly object _lock = new object();
+        private readonly string _debugDirectory;
+
+        private OcrDebugSnapshotModel _pending;
+        private bool _waitingOverlay;
+
+        /// <summary>오버레이가 렌더 값을 채워주기를 기다리는 중인지.</summary>
+        public bool IsWaitingOverlay
+        {
+            get
+            {
+                lock(_lock)
+                {
+                    return _waitingOverlay && _pending != null;
+                }
+            }
+        }
+
+        public OcrDebugSnapshotService()
+        {
+            _debugDirectory = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "UserData", "Debug", DirectoryName);
+        }
+
+        /// <summary>
+        /// OCR / 번역이 끝난 시점의 결과를 담아둔다.
+        /// 오버레이 스킨이 아니면 이 시점에 바로 저장한다.
+        /// </summary>
+        public void CaptureOcrResult(
+            List<OCRDataManager.ResultData> dataList,
+            SettingManager.Skin skin,
+            SettingManager.OcrType ocrType,
+            SettingManager.TransType transType,
+            string ocrText,
+            string transText)
+        {
+            try
+            {
+                var areas = new List<OcrDebugArea>();
+                if(dataList != null)
+                {
+                    foreach(var data in dataList)
+                    {
+                        if(data == null)
+                        {
+                            continue;
+                        }
+
+                        areas.Add(ConvertArea(data));
+                    }
+                }
+
+                var snapshot = new OcrDebugSnapshotModel
+                {
+                    CapturedAt = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss.fff"),
+                    Skin = skin.ToString(),
+                    OcrType = ocrType.ToString(),
+                    TransType = transType.ToString(),
+                    OcrText = ocrText ?? "",
+                    TransText = transText ?? "",
+                    Areas = areas,
+                };
+
+                OcrDebugSnapshotModel abandoned = null;
+                lock(_lock)
+                {
+                    // 오버레이가 끝내 그려지지 않은 이전 스냅샷은 오버레이 정보 없이라도 남긴다.
+                    if(_pending != null)
+                    {
+                        abandoned = _pending;
+                    }
+
+                    _pending = snapshot;
+                    _waitingOverlay = skin == SettingManager.Skin.over;
+                }
+
+                if(abandoned != null)
+                {
+                    Save(abandoned);
+                }
+
+                if(skin != SettingManager.Skin.over)
+                {
+                    Flush();
+                }
+            }
+            catch(Exception ex)
+            {
+                Util.ShowLog($"OcrDebugSnapshotService: CaptureOcrResult failed - {ex.Message}");
+            }
+        }
+
+        /// <summary>
+        /// 오버레이가 실제로 그린 최종값을 채우고 파일로 저장한다.
+        /// </summary>
+        public void CompleteOverlay(Rectangle formRect, bool useBackColor, List<OcrDebugOverlayBlock> blocks)
+        {
+            try
+            {
+                var overlay = new OcrDebugOverlayInfo
+                {
+                    FormRect = OcrDebugRect.From(formRect),
+                    IsAutoFontSize = AdvencedOptionManager.IsAutoFontSize,
+                    MinAutoFontSize = AdvencedOptionManager.MinAutoFontSize,
+                    MaxAutoFontSize = AdvencedOptionManager.MaxAutoFontSize,
+                    KeepSourceDirection = AdvencedOptionManager.OverlayKeepSourceDirection,
+                    UseFontOutline = AdvencedOptionManager.OverlayUseFontOutline,
+                    AutoColor = AdvencedOptionManager.OverlayAutoColor,
+                    AutoBackgroundColor = AdvencedOptionManager.OverlayAutoBackgroundColor,
+                    AutoFontColor = AdvencedOptionManager.OverlayAutoFontColor,
+                    UseBackColor = useBackColor,
+                    Blocks = blocks ?? new List<OcrDebugOverlayBlock>(),
+                };
+
+                lock(_lock)
+                {
+                    if(_pending == null)
+                    {
+                        return;
+                    }
+
+                    _pending = _pending with { Overlay = overlay };
+                    _waitingOverlay = false;
+                }
+
+                Flush();
+            }
+            catch(Exception ex)
+            {
+                Util.ShowLog($"OcrDebugSnapshotService: CompleteOverlay failed - {ex.Message}");
+            }
+        }
+
+        private void Flush()
+        {
+            OcrDebugSnapshotModel target;
+            lock(_lock)
+            {
+                target = _pending;
+                _pending = null;
+                _waitingOverlay = false;
+            }
+
+            if(target != null)
+            {
+                Save(target);
+            }
+        }
+
+        private void Save(OcrDebugSnapshotModel snapshot)
+        {
+            try
+            {
+                Directory.CreateDirectory(_debugDirectory);
+
+                string fileName = $"ocr_analysis_{DateTime.Now:yyyyMMdd_HHmmss_fff}.json";
+                string filePath = Path.Combine(_debugDirectory, fileName);
+                string json = JsonConvert.SerializeObject(snapshot, Formatting.Indented);
+
+                Util.SaveFile(filePath, json, false);
+                Util.ShowLog($"OcrDebugSnapshotService: saved {filePath}");
+            }
+            catch(Exception ex)
+            {
+                Util.ShowLog($"OcrDebugSnapshotService: Save failed - {ex.Message}");
+            }
+        }
+
+        private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)
+        {
+            var autoColors = new List<OcrDebugAutoColor>();
+            foreach(var color in data.AutoColor)
+            {
+                autoColors.Add(new OcrDebugAutoColor
+                {
+                    Font = ToColorText(color.Font),
+                    Background = ToColorText(color.BackGround),
+                });
+            }
+
+            var lines = new List<OcrDebugLine>();
+            foreach(var line in data.LineDataList)
+            {
+                lines.Add(ConvertLine(line));
+            }
+
+            var transBlocks = new List<OcrDebugTransBlock>();
+            foreach(var transData in data.TransDataList)
+            {
+                transBlocks.Add(ConvertTransBlock(transData));
+            }
+
+            return new OcrDebugArea
+            {
+                Index = data.Index,
+                SnapShot = data.SnapShot,
+                AreaRect = OcrDebugRect.From(GetAreaRect(data)),
+                ResultRect = OcrDebugRect.From(data.ResultRect),
+                OcrText = data.GetOCR(),
+                TransText = data.TransString,
+                UseAutoColor = data.UseAutoColor,
+                AutoColors = autoColors,
+                Lines = lines,
+                TransBlocks = transBlocks,
+            };
+        }
+
+        private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)
+        {
+            var lines = new List<OcrDebugLine>();
+            foreach(var line in transData.lineDataList)
+            {
+                lines.Add(ConvertLine(line));
+            }
+
+            return new OcrDebugTransBlock
+            {
+                Index = transData.index,
+                Trans = transData.trans,
+                IsTitle = transData.TitleData,
+                AngleType = transData.angleType.ToString(),
+                LineRect = OcrDebugRect.From(transData.lineRect),
+                SourceRect = OcrDebugRect.From(transData.SourceRect),
+                ViewRect = OcrDebugRect.From(transData.ViewRect),
+                ContentRect = OcrDebugRect.From(transData.ContentRect),
+                Lines = lines,
+            };
+        }
+
+        private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)
+        {
+            var words = new List<OcrDebugWord>();
+            for(int i = 0; i < lineData.wordList.Count; i++)
+            {
+                Rectangle wordRect = i < lineData.wordRectList.Count ? lineData.wordRectList[i] : Rectangle.Empty;
+                words.Add(new OcrDebugWord
+                {
+                    Text = lineData.wordList[i],
+                    Rect = OcrDebugRect.From(wordRect),
+                });
+            }
+
+            return new OcrDebugLine
+            {
+                GroupIndex = lineData.groupIndex,
+                LineString = lineData.lineString,
+                TransString = lineData.transString,
+                AngleType = lineData.angleType.ToString(),
+                LineRect = OcrDebugRect.From(lineData.lineRect),
+                Words = words,
+                TransWords = new List<string>(lineData.transWordList),
+            };
+        }
+
+        private static Rectangle GetAreaRect(OCRDataManager.ResultData data)
+        {
+            try
+            {
+                if(data.SnapShot)
+                {
+                    return FormManager.Instace.MyMainForm.MySettingManager.LastSnapShotRect;
+                }
+
+                return FormManager.Instace.MyMainForm.GetOcrAreaProcessRect(data.Index);
+            }
+            catch(Exception ex)
+            {
+                Util.ShowLog($"OcrDebugSnapshotService: GetAreaRect failed - {ex.Message}");
+                return Rectangle.Empty;
+            }
+        }
+
+        public static string ToColorText(Color color)
+        {
+            return $"#{color.A:X2}{color.R:X2}{color.G:X2}{color.B:X2}";
+        }
+    }
+}
diff --git a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
index b73fc12..1128ad7 100644
--- a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
+++ b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
@@ -56,6 +56,7 @@ public bool IsUseClipBoardFlag
         private readonly bool _isAvailableWinOCR;
         private readonly TranslationProcessInitializationService _initializationService;
         private readonly TranslationImageModelService _imageModelService;
+        private readonly MORT.Service.Debug.OcrDebugSnapshotService _debugSnapshotService;
         private OcrMethodType _ocrMethodType = OcrMethodType.None;
         private CancellationTokenSource _cts = new CancellationTokenSource();
 
@@ -77,6 +78,8 @@ public ProcessTranslateService(Form parent, TranslateResultMemoryService memoryS
             _imageModelService = new TranslationImageModelService(
                 () => isEndFlag,
                 () => isEndFlag = true);
+            _debugSnapshotService = Program.ServiceContainer?.GetService(typeof(MORT.Service.Debug.OcrDebugSnapshotService))
+                as MORT.Service.Debug.OcrDebugSnapshotService;
             this.OnStopTranslate = OnStopTranslate;
         }
 
@@ -740,6 +743,18 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
 
                                 finalTransResult = _memoryService.CheckMemoryResult(finalTransResult);
 
+                                //디버깅 : 이미지 인식 결과를 파일로 남긴다.
+                                //오버레이는 아래 UpdateText 이후 실제로 그릴 때 최종값이 채워진다.
+                                if (Form1.IsDebugSaveAnalysisResult && _debugSnapshotService != null)
+                                {
+                                    _debugSnapshotService.CaptureOcrResult(
+                                        OCRDataManager.Instace.GetData(),
+                                        _settingManager.NowSkin,
+                                        _settingManager.OCRType,
+                                        _settingManager.NowTransType,
+                                        NowOcrString,
+                                        finalTransResult);
+                                }
 
                                 if (_settingManager.NowSkin == SettingManager.Skin.dark && FormManager.Instace.MyBasicTransForm != null)
                                 {
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index c1c7114..64a2d36 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size. Fit uses actual glyph cross-size plus spacing only between additional lines, so a single line is not reduced by a full line-leading allowance.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-02T14:19:48Z","sourceFileCount":145,"typeCount":243,"methodCount":1437,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","lines":41,"updatedUtc":"2026-08-02T14:19:48Z","category":"비즈니스 서비스","intent":"ImageRecognitionDebugService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Save 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["ImageRecognitionDebugService"],"methods":[{"access":"public","name":"Save","line":19,"signature":"public void Save(ImageRecognitionDebugData data)"}],"dependencies":["MORT.Model.Debug","System","System.IO","System.Text.Json"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"DebugRectangle","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":6},{"kind":"record","name":"ImageRecognitionDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":7},{"kind":"record","name":"OcrAreaDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":17},{"kind":"record","name":"OcrLineDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":26},{"kind":"record","name":"OcrWordDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":32},{"kind":"record","name":"OverlayTextDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":34},{"kind":"record","name":"OverlayLineDebugData","path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","line":59},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"ImageRecognitionDebugService","path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","line":8},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":16},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":196},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":506},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1691},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":311,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":781,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":794,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":921,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1518,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1837,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1845,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1934,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1948,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2073,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2214,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2227,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2692,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3068,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3441,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":67,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":375,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":550,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":640,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":727,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3631,"updatedUtc":"2026-08-02T08:48:46Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":189,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":193,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":204,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":208,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":222,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":226,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":231,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":235,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":239,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":244,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":248,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":252,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":256,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":260,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":264,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":268,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":272,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":276,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":280,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":284,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":288,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":296,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":321,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":370,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":377,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":383,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":389,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":417,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":437,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":574,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":602,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":612,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":627,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":639,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":653,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":660,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":691,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":709,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":858,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":906,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":911,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":936,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":952,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":996,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1027,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1125,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1130,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1296,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1301,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1306,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1318,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1323,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1328,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1333,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1338,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1376,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1405,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1411,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1431,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1452,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1464,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1476,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1488,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1514,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1526,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1540,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1550,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1573,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1604,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1632,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1643,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1651,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1696,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1706,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1736,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1742,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1754,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1796,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1800,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1824,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1894,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1977,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2024,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2050,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2060,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2066,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2074,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2242,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2258,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2302,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2355,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2392,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2414,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2448,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2453,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2458,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2463,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2471,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2498,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2567,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2575,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2598,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2620,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2642,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2699,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2711,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2728,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2738,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2744,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2760,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2776,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2781,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2790,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2795,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2803,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2805,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2813,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2818,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2827,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2832,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2843,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2863,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2879,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2900,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2938,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2944,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2953,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2961,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2967,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2972,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2977,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":2999,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3180,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3238,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3244,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3250,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3256,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3262,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3268,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3272,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3277,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3285,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3291,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3297,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3303,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3309,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3316,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3322,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3334,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3383,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3401,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3419,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3438,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3454,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3490,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3495,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3500,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3540,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3551,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3556,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3572,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3593,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3601,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3607,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3612,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3618,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4394,"updatedUtc":"2026-06-07T16:18:42Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":309,"updatedUtc":"2026-06-07T16:18:42Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":149,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":155,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":166,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":170,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":209,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":217,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":233,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":239,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":244,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":249,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":254,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":259,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":265,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":270,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":275,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":280,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":285,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":290,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":295,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":300,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/ImageRecognitionDebugData.cs","lines":61,"updatedUtc":"2026-08-02T14:19:20Z","category":"데이터 모델","intent":"DebugRectangle, ImageRecognitionDebugData, OcrAreaDebugData, OcrLineDebugData, OcrWordDebugData, OverlayTextDebugData, OverlayLineDebugData 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["DebugRectangle","ImageRecognitionDebugData","OcrAreaDebugData","OcrLineDebugData","OcrWordDebugData","OverlayTextDebugData","OverlayLineDebugData"],"methods":[{"access":"public","name":"DebugRectangle","line":6,"signature":"public record DebugRectangle(int X, int Y, int Width, int Height)"},{"access":"public","name":"OcrWordDebugData","line":32,"signature":"public record OcrWordDebugData(string Text, DebugRectangle Area)"},{"access":"public","name":"OverlayLineDebugData","line":59,"signature":"public record OverlayLineDebugData(string Text, DebugRectangle Area)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":251,"updatedUtc":"2026-08-02T08:41:08Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/ImageRecognitionDebugService.cs","lines":41,"updatedUtc":"2026-08-02T14:19:48Z","category":"비즈니스 서비스","intent":"ImageRecognitionDebugService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Save 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["ImageRecognitionDebugService"],"methods":[{"access":"public","name":"Save","line":19,"signature":"public void Save(ImageRecognitionDebugData data)"}],"dependencies":["MORT.Model.Debug","System","System.IO","System.Text.Json"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":975,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":61,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":82,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":148,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":275,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":293,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":330,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":349,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":839,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":854,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":872,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":913,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":927,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":949,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2025,"updatedUtc":"2026-08-02T09:32:27Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":31,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":34,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":43,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":47,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":51,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":54,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":57,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":58,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":67,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":78,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":219,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":220,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":235,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":278,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":318,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":331,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":346,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":347,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":387,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":410,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":416,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":429,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":435,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":480,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":500,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":518,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":612,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":684,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":733,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":762,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":791,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":799,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":808,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":814,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":872,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":880,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":963,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":986,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1017,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1035,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1043,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1062,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1099,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1113,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1132,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1137,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1371,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"DrawStringWithOutline2","line":1400,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1475,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1536,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1554,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1695,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1701,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1714,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1722,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1742,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1753,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1758,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1763,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1775,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1819,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":1932,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":1939,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":1947,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":1957,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":1964,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":1970,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":1987,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":1991,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":1997,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2002,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2007,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2012,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T04:58:43Z","sourceFileCount":145,"typeCount":245,"methodCount":1445,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":990,"updatedUtc":"2026-08-04T03:59:30Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":854,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":869,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":887,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":928,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":942,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":964,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1824},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":990,"updatedUtc":"2026-08-04T03:59:30Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":854,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":869,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":887,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":928,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":942,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":964,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2158,"updatedUtc":"2026-08-04T04:58:43Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1608,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1669,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1687,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1828,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1834,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1847,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1855,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1875,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1886,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1891,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1896,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1908,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1952,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2065,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2072,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2080,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2090,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2097,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2103,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2120,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2124,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2130,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2135,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2140,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2145,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";

From 572e3a06ce221e5f9c734aa1afe4d488fb0a7bc5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 15:03:55 +0900
Subject: [PATCH 3/6] =?UTF-8?q?=EB=94=94=EB=B2=84=EA=B9=85=20=EA=B8=B0?=
 =?UTF-8?q?=EB=8A=A5=20=EA=B0=95=ED=99=94?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 MORT/Form1.Designer.cs                        |  20 +-
 MORT/Form1.cs                                 |   1 +
 MORT/Form1Button.cs                           |   8 +
 MORT/Program.cs                               |   2 +
 .../ProcessTranslateService.cs                |  15 +-
 MORT/TransFormOver.cs                         | 218 +++++++++++++++---
 docs/wiki/index.html                          |   2 +-
 7 files changed, 234 insertions(+), 32 deletions(-)

diff --git a/MORT/Form1.Designer.cs b/MORT/Form1.Designer.cs
index 40b2fe3..deb4e75 100644
--- a/MORT/Form1.Designer.cs
+++ b/MORT/Form1.Designer.cs
@@ -325,6 +325,7 @@ private void InitializeComponent()
             panel24 = new System.Windows.Forms.Panel();
             panel26 = new System.Windows.Forms.Panel();
             plDebugOn = new System.Windows.Forms.Panel();
+            cbSaveAnalysisResult = new System.Windows.Forms.CheckBox();
             cbShowOverlayWordArea = new System.Windows.Forms.CheckBox();
             cbSetLineTrans = new System.Windows.Forms.CheckBox();
             btClearFormerResult = new System.Windows.Forms.Button();
@@ -3787,6 +3788,7 @@ private void InitializeComponent()
             // 
             // plDebugOn
             // 
+            plDebugOn.Controls.Add(cbSaveAnalysisResult);
             plDebugOn.Controls.Add(cbShowOverlayWordArea);
             plDebugOn.Controls.Add(cbSetLineTrans);
             plDebugOn.Controls.Add(btClearFormerResult);
@@ -3799,9 +3801,22 @@ private void InitializeComponent()
             plDebugOn.Name = "plDebugOn";
             plDebugOn.Size = new System.Drawing.Size(507, 512);
             plDebugOn.TabIndex = 56;
-            // 
+            //
+            // cbSaveAnalysisResult
+            //
+            cbSaveAnalysisResult.AutoSize = true;
+            cbSaveAnalysisResult.Font = new System.Drawing.Font("맑은 고딕", 9.75F, System.Drawing.FontStyle.Bold);
+            cbSaveAnalysisResult.ForeColor = System.Drawing.Color.White;
+            cbSaveAnalysisResult.Location = new System.Drawing.Point(14, 240);
+            cbSaveAnalysisResult.Name = "cbSaveAnalysisResult";
+            cbSaveAnalysisResult.Size = new System.Drawing.Size(383, 21);
+            cbSaveAnalysisResult.TabIndex = 29;
+            cbSaveAnalysisResult.Text = "이미지 인식 결과 저장 - UserData/Debug/OcrAnalysis/*.json";
+            cbSaveAnalysisResult.UseVisualStyleBackColor = true;
+            cbSaveAnalysisResult.CheckedChanged += cbSaveAnalysisResult_CheckedChanged;
+            //
             // cbShowOverlayWordArea
-            // 
+            //
             cbShowOverlayWordArea.AutoSize = true;
             cbShowOverlayWordArea.Font = new System.Drawing.Font("맑은 고딕", 9.75F, System.Drawing.FontStyle.Bold);
             cbShowOverlayWordArea.ForeColor = System.Drawing.Color.White;
@@ -4286,6 +4301,7 @@ private void InitializeComponent()
         private System.Windows.Forms.Panel panel24;
         private System.Windows.Forms.Panel panel26;
         private System.Windows.Forms.Label lbDebugging;
+        private System.Windows.Forms.CheckBox cbSaveAnalysisResult;
         private System.Windows.Forms.CheckBox cbShowOCRIndex;
         private System.Windows.Forms.Button btnHideTransEmpty;
         private System.Windows.Forms.Button btnHideTransDefault;
diff --git a/MORT/Form1.cs b/MORT/Form1.cs
index fd15b00..68a45a1 100644
--- a/MORT/Form1.cs
+++ b/MORT/Form1.cs
@@ -176,6 +176,7 @@ public List<string> WinLanguageCodeList
         public static bool IsDebugShowFormerResultLog = false;
         public static bool IsDebugTransOneLine = false;
         public static bool IsDebugShowWordArea = false;
+        public static bool IsDebugSaveAnalysisResult = false;
 
         private List<KeyInputLabel> inputKeyUIList = new List<KeyInputLabel>();
 
diff --git a/MORT/Form1Button.cs b/MORT/Form1Button.cs
index bb8fa20..22654dd 100644
--- a/MORT/Form1Button.cs
+++ b/MORT/Form1Button.cs
@@ -145,6 +145,14 @@ private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)
             }
         }
 
+        private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)
+        {
+            if (MySettingManager.isDebugMode)
+            {
+                IsDebugSaveAnalysisResult = cbSaveAnalysisResult.Checked;
+            }
+        }
+
         #endregion
 
 
diff --git a/MORT/Program.cs b/MORT/Program.cs
index d750a7e..ef92d16 100644
--- a/MORT/Program.cs
+++ b/MORT/Program.cs
@@ -242,6 +242,8 @@ private static void ConfigureServices(IServiceCollection services)
             services.AddSingleton<TranslateTypListService>();
             services.AddSingleton<CustomApiPresetService>();
             services.AddSingleton<MouseFollowOcrAreaService>();
+            //using System.Diagnostics 와 이름이 겹쳐서 네임스페이스를 그대로 적는다
+            services.AddSingleton<Service.Debug.OcrDebugSnapshotService>();
 
 
             // 만약 Form1이 의존하는 다른 서비스들이 있다면 여기서 추가로 등록합니다.
diff --git a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
index 1128ad7..216d1bd 100644
--- a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
+++ b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
@@ -848,7 +848,20 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
             }
             catch (Exception e)
             {
-                MessageBox.Show($"{e.Message} / {e.StackTrace}");
+                //이 스레드에서 MessageBox 를 띄우면 이 스레드에 모달 루프가 생겨 스레드가 끝나지 않는다.
+                //UI 가 thread.Join() 으로 이 스레드를 기다리는 중이면 서로 못 빠져나온다.
+                //알림은 UI 스레드에 넘기고 이 스레드는 그대로 끝낸다.
+                string message = $"{e.Message} / {e.StackTrace}";
+                Util.ShowLog(message);
+
+                try
+                {
+                    _parent.BeginInvoke((Action)(() => MessageBox.Show(message)));
+                }
+                catch (Exception reportException)
+                {
+                    Util.ShowLog($"ProcessTranslateService: failed to report error - {reportException.Message}");
+                }
             }
         }
 
diff --git a/MORT/TransFormOver.cs b/MORT/TransFormOver.cs
index 5636e0d..1cd749d 100644
--- a/MORT/TransFormOver.cs
+++ b/MORT/TransFormOver.cs
@@ -1,5 +1,7 @@
 using R3;
 using System;
+using MORT.Model.Debug;
+using MORT.Service.Debug;
 using MORT.Service.Overlay;
 using System.Collections.Generic;
 using System.ComponentModel;
@@ -504,6 +506,18 @@ public void UpdateTransform()
             UpdatePaint();
         }
 
+        private OcrDebugSnapshotService _debugSnapshotService;
+        private OcrDebugSnapshotService DebugSnapshotService
+            => _debugSnapshotService ??= Program.ServiceContainer?.GetService(typeof(OcrDebugSnapshotService)) as OcrDebugSnapshotService;
+
+        private readonly record struct OverlayDrawColors(
+            Color Font,
+            Color Background,
+            bool UsesAutomaticColor,
+            bool Corrected,
+            Color Outline1,
+            Color Outline2);
+
         private sealed class OverlayRenderBlock
         {
             public OCRDataManager.ResultData TargetData;
@@ -535,6 +549,13 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
             List<OverlayRenderBlock> blocks = BuildRenderBlocks();
             ResolveBlockCollisions(blocks);
 
+            //디버깅 : 실제로 그린 값 그대로를 모아 스냅샷에 넘긴다.
+            var debugService = DebugSnapshotService;
+            List<OcrDebugOverlayBlock> debugBlocks =
+                Form1.IsDebugSaveAnalysisResult && debugService != null && debugService.IsWaitingOverlay
+                    ? new List<OcrDebugOverlayBlock>()
+                    : null;
+
             foreach(var block in blocks)
             {
                 using StringFormat blockFormat = (StringFormat)sf.Clone();
@@ -546,6 +567,8 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
                     block.TransData.ViewRect = block.ViewRect;
                     block.TransData.ContentRect = Rectangle.Empty;
                     Util.ShowLog($"Overlay block clipped: {block.TransData.trans}");
+                    debugBlocks?.Add(MakeDebugOverlayBlock(
+                        g, block, null, Rectangle.Empty, 0f, 0f, 0f, false, blockFormat, outlineColor1, outlineColor2, true));
                     continue;
                 }
 
@@ -581,6 +604,7 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
                         $"font={fontSize:0.00}, sourceFont={GetSourceFontPointSize(g, block):0.00}, text={block.TransData.trans}");
                 }
 
+                bool drawBackground = false;
                 if(_isStart && Form1.IsDebugShowWordArea)
                 {
                     using var debugBrush = new SolidBrush(Color.FromArgb(90, 0, 0, 0));
@@ -588,6 +612,7 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
                 }
                 else if(_isStart && FormManager.Instace.MyMainForm.MySettingManager.NowIsUseBackColor)
                 {
+                    drawBackground = true;
                     Color background = FormManager.Instace.MyMainForm.MySettingManager.BackgroundColor;
                     if(block.TargetData.UseAutoColor
                         && AdvencedOptionManager.OverlayAutoBackgroundColor
@@ -603,11 +628,84 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
 
                 DrawWrappedText(g, block, renderFont, blockFormat, outlineColor1, outlineWidth1, outlineColor2, outlineWidth2);
 
-                if(!DoesTextFit(g, block.TransData.trans, renderFont, contentRect, blockFormat, block.VerticalMode))
+                bool clipped = !DoesTextFit(g, block.TransData.trans, renderFont, contentRect, blockFormat, block.VerticalMode);
+                if(clipped)
                 {
                     Util.ShowLog($"Overlay block clipped at minimum font: {block.TransData.trans}");
                 }
-            }
+
+                debugBlocks?.Add(MakeDebugOverlayBlock(
+                    g, block, renderFont, contentRect, fontSize, preferredSize, minimumSize, drawBackground,
+                    blockFormat, outlineColor1, outlineColor2, clipped));
+            }
+
+            if(debugBlocks != null)
+            {
+                debugService.CompleteOverlay(
+                    Bounds,
+                    FormManager.Instace.MyMainForm.MySettingManager.NowIsUseBackColor,
+                    debugBlocks);
+            }
+        }
+
+        /// <summary>
+        /// 디버깅 스냅샷용 : 이 블록을 실제로 어떻게 그렸는지 최종값을 모은다.
+        /// </summary>
+        private OcrDebugOverlayBlock MakeDebugOverlayBlock(
+            Graphics g,
+            OverlayRenderBlock block,
+            Font renderFont,
+            Rectangle contentRect,
+            float fontSize,
+            float preferredSize,
+            float minimumSize,
+            bool drawBackground,
+            StringFormat blockFormat,
+            Color outlineColor1,
+            Color outlineColor2,
+            bool clipped)
+        {
+            OverlayDrawColors colors = ResolveDrawColors(
+                block.TargetData, block.ColorIndex, block.TransData.trans, outlineColor1, outlineColor2);
+
+            var wrappedLines = new List<string>();
+            float lineAdvance = 0f;
+            if(renderFont != null)
+            {
+                wrappedLines = GetWrappedLinesByAddString(
+                    g, block.TransData.trans, renderFont, contentRect.Width, contentRect.Height, blockFormat, block.VerticalMode);
+                lineAdvance = renderFont.GetHeight(g) * 1.2f;
+            }
+
+            return new OcrDebugOverlayBlock
+            {
+                AreaIndex = block.TargetData.Index,
+                ColorIndex = block.ColorIndex,
+                Text = block.TransData.trans,
+                IsTitle = block.TransData.TitleData,
+                VerticalMode = block.VerticalMode,
+                CaptureRect = OcrDebugRect.From(block.CaptureRect),
+                SourceRect = OcrDebugRect.From(block.SourceRect),
+                ViewRect = OcrDebugRect.From(block.ViewRect),
+                ContentRect = OcrDebugRect.From(contentRect),
+                FontFamily = renderFont?.FontFamily.Name ?? "",
+                FontStyle = renderFont?.Style.ToString() ?? "",
+                FontSize = fontSize,
+                PreferredFontSize = preferredSize,
+                MinimumFontSize = minimumSize,
+                SourceFontSize = GetSourceFontPointSize(g, block),
+                FontColor = OcrDebugSnapshotService.ToColorText(colors.Font),
+                BackgroundColor = OcrDebugSnapshotService.ToColorText(colors.Background),
+                DrawBackground = drawBackground,
+                UseAutoColor = colors.UsesAutomaticColor,
+                ContrastCorrected = colors.Corrected,
+                UseOutline = AdvencedOptionManager.OverlayUseFontOutline,
+                OutlineColor1 = OcrDebugSnapshotService.ToColorText(colors.Outline1),
+                OutlineColor2 = OcrDebugSnapshotService.ToColorText(colors.Outline2),
+                WrappedLines = wrappedLines,
+                LineAdvance = lineAdvance,
+                Clipped = clipped,
+            };
         }
 
         private List<OverlayRenderBlock> BuildRenderBlocks()
@@ -1073,39 +1171,62 @@ private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, Str
                 return true;
             }
 
+            //DrawWrappedText 가 실제로 놓는 자리에 글자를 얹어보고 rect 를 벗어나는지 본다.
+            //줄 수와 줄 간격만 더해서 판단하면 마지막 줄이 자기 칸 안에서 차지하는 여백을 빠뜨려,
+            //들어간다고 판단해놓고 실제로는 옆 블록 영역까지 글자가 넘어간다.
             float lineAdvance = font.GetHeight(g) * 1.2f;
-            int outlinePadding = AdvencedOptionManager.OverlayUseFontOutline ? 5 : 0;
+            float outlinePadding = AdvencedOptionManager.OverlayUseFontOutline ? 2.5f : 0f;
             float emSize = g.DpiY * font.SizeInPoints / 72f;
-            float maximumCrossSize = 0;
-            foreach(string line in lines)
+
+            for(int index = 0; index < lines.Count; index++)
             {
+                //여기서는 잘라내지 않은 칸을 그대로 쓴다. 잘라내면 넘어간 사실이 가려진다.
+                Rectangle lineRect = GetLineRect(rect, index, lineAdvance, vertical);
                 using var path = new GraphicsPath();
-                path.AddString(line, font.FontFamily, (int)font.Style, emSize, Point.Empty, format);
+                path.AddString(lines[index], font.FontFamily, (int)font.Style, emSize, lineRect, format);
                 RectangleF bounds = path.GetBounds();
-                maximumCrossSize = Math.Max(maximumCrossSize, vertical ? bounds.Width : bounds.Height);
-                if(vertical ? bounds.Height + outlinePadding > rect.Height : bounds.Width + outlinePadding > rect.Width)
+                if(bounds.Width <= 0 && bounds.Height <= 0)
+                {
+                    //공백뿐인 줄은 그려지는 것이 없다
+                    continue;
+                }
+
+                bounds.Inflate(outlinePadding, outlinePadding);
+                if(bounds.Left < rect.Left || bounds.Right > rect.Right
+                    || bounds.Top < rect.Top || bounds.Bottom > rect.Bottom)
                 {
                     return false;
                 }
             }
 
-            float occupied = maximumCrossSize + Math.Max(0, lines.Count - 1) * lineAdvance + outlinePadding;
-            if(vertical ? occupied > rect.Width : occupied > rect.Height)
-            {
-                return false;
-            }
             return true;
         }
 
+        /// <summary>
+        /// 줄 하나가 놓이는 칸. 판정과 그리기가 같은 자리를 써야 한다.
+        /// </summary>
+        private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)
+        {
+            return vertical
+                ? new Rectangle(
+                    contentRect.Right - (int)Math.Ceiling((index + 1) * lineAdvance),
+                    contentRect.Top,
+                    (int)Math.Ceiling(lineAdvance),
+                    contentRect.Height)
+                : new Rectangle(
+                    contentRect.Left,
+                    contentRect.Top + (int)Math.Floor(index * lineAdvance),
+                    contentRect.Width,
+                    (int)Math.Ceiling(lineAdvance));
+        }
+
         private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)
         {
             List<string> lines = GetWrappedLinesByAddString(g, block.TransData.trans, font, block.ContentRect.Width, block.ContentRect.Height, format, block.VerticalMode);
             float advance = font.GetHeight(g) * 1.2f;
             for(int index = 0; index < lines.Count; index++)
             {
-                Rectangle lineRect = block.VerticalMode
-                    ? new Rectangle(block.ContentRect.Right - (int)Math.Ceiling((index + 1) * advance), block.ContentRect.Top, (int)Math.Ceiling(advance), block.ContentRect.Height)
-                    : new Rectangle(block.ContentRect.Left, block.ContentRect.Top + (int)Math.Floor(index * advance), block.ContentRect.Width, (int)Math.Ceiling(advance));
+                Rectangle lineRect = GetLineRect(block.ContentRect, index, advance, block.VerticalMode);
                 lineRect = Rectangle.Intersect(lineRect, block.ContentRect);
                 DrawStringWithOutline2(g, lines[index], font, lineRect, format, block.TargetData, block.ColorIndex, outlineColor1, outlineWidth1, outlineColor2, outlineWidth2);
             }
@@ -1397,7 +1518,10 @@ private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color
         }
 
         // 2중 아웃라인 + 본문 텍스트를 DrawString으로 그리는 함수
-        private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)
+        /// <summary>
+        /// 실제로 칠하는 색을 정한다. 디버깅 스냅샷도 같은 값을 기록해야 하므로 분리해두었다.
+        /// </summary>
+        private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)
         {
             SettingManager setting = FormManager.Instace.MyMainForm.MySettingManager;
             Color fontColor = setting.TextColor;
@@ -1438,6 +1562,15 @@ private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangl
                 GetAutoOutlineColors(fontColor, out outlineColor1, out outlineColor2);
             }
 
+            return new OverlayDrawColors(fontColor, backgroundColor, usesAutomaticColor, corrected, outlineColor1, outlineColor2);
+        }
+
+        private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)
+        {
+            OverlayDrawColors colors = ResolveDrawColors(targetData, colorIdx, text, outlineColor1, outlineColor2);
+            Color fontColor = colors.Font;
+            outlineColor1 = colors.Outline1;
+            outlineColor2 = colors.Outline2;
 
             // GraphicsPath로 텍스트 경로 생성
             using(GraphicsPath path = new GraphicsPath())
@@ -1541,14 +1674,37 @@ public void UpdatePaint()
                 return;
             }
 
-            if(this.InvokeRequired)
+            if(IsDisposed || isDestroyFormFlag)
             {
-                Action action = () => DoUpdatePaint();
-                this.BeginInvoke(action);
+                return;
             }
-            else
+
+            //핸들이 없으면 InvokeRequired 가 false 라 번역 스레드가 그대로 그리게 되고,
+            //그리는 중 this.Handle 을 읽으면 핸들이 그 스레드에 생긴다.
+            //그러면 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶여
+            //이후 이 폼에 대한 Invoke 가 영영 풀리지 않는다.
+            if(!IsHandleCreated && FormManager.Instace.MyMainForm is Form mainForm && mainForm.InvokeRequired)
+            {
+                return;
+            }
+
+            try
+            {
+                if(this.InvokeRequired)
+                {
+                    Action action = () => DoUpdatePaint();
+                    this.BeginInvoke(action);
+                }
+                else
+                {
+                    DoUpdatePaint();
+                }
+            }
+            catch(Exception ex)
             {
-                DoUpdatePaint();
+                //정리 중인 폼에 BeginInvoke 하면 예외가 난다.
+                //번역 스레드까지 올라가면 스레드가 그대로 끝나버려 Join 이 풀리지 않으므로 여기서 막는다.
+                Util.ShowLog($"TransFormOver.UpdatePaint failed - {ex.Message}");
             }
         }
 
@@ -1561,16 +1717,20 @@ private void DoUpdatePaint()
             }
 
             isLockPaint = true;
-            CheckSizeAndLocation();
-            Util.ShowLog("Update paint + " + makeIndex);
 
             // Get device contexts
-            IntPtr screenDc = GetDC(IntPtr.Zero);
-            IntPtr memDc = CreateCompatibleDC(screenDc);
+            IntPtr screenDc = IntPtr.Zero;
+            IntPtr memDc = IntPtr.Zero;
             IntPtr hBitmap = IntPtr.Zero;
             IntPtr hOldBitmap = IntPtr.Zero;
             try
             {
+                CheckSizeAndLocation();
+                Util.ShowLog("Update paint + " + makeIndex);
+
+                screenDc = GetDC(IntPtr.Zero);
+                memDc = CreateCompatibleDC(screenDc);
+
 
                 if(bitmap == null || bitmap.Width != this.Width || bitmap.Height != Height)
                 {
@@ -1684,9 +1844,11 @@ private void DoUpdatePaint()
                 }
                 DeleteDC(memDc);
                 GC.Collect();
-            }
 
-            isLockPaint = false;
+                //중간 return 이나 예외로 빠져나가도 잠금은 반드시 푼다.
+                //풀리지 않으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.
+                isLockPaint = false;
+            }
         }
 
 
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index 64a2d36..8645cec 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T04:58:43Z","sourceFileCount":145,"typeCount":245,"methodCount":1445,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":990,"updatedUtc":"2026-08-04T03:59:30Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":854,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":869,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":887,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":928,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":942,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":964,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1824},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":990,"updatedUtc":"2026-08-04T03:59:30Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":854,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":869,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":887,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":928,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":942,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":964,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2158,"updatedUtc":"2026-08-04T04:58:43Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1608,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1669,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1687,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1828,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1834,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1847,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1855,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1875,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1886,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1891,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1896,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1908,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1952,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2065,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2072,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2080,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2090,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2097,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2103,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2120,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2124,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2130,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2135,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2140,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2145,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T05:55:53Z","sourceFileCount":145,"typeCount":245,"methodCount":1445,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1853},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2187,"updatedUtc":"2026-08-04T05:55:46Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1608,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1669,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1710,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1857,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1863,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1876,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1884,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1904,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1915,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1920,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1925,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1937,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1981,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2094,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2101,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2109,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2119,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2126,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2132,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2149,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2153,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2159,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2164,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2169,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2174,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";

From 7fb4a0f0450282b4e64644c429bc8b445a0da349 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 15:14:40 +0900
Subject: [PATCH 4/6] =?UTF-8?q?=EC=98=A4=EB=B2=84=EB=A0=88=EC=9D=B4=20?=
 =?UTF-8?q?=EC=84=B1=EB=8A=A5=20=EA=B0=9C=EC=84=A0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 MORT/TransFormOver.cs | 70 ++++++++++++++++++++++++++-----------------
 docs/wiki/index.html  |  2 +-
 2 files changed, 43 insertions(+), 29 deletions(-)

diff --git a/MORT/TransFormOver.cs b/MORT/TransFormOver.cs
index 1cd749d..b8fecc2 100644
--- a/MORT/TransFormOver.cs
+++ b/MORT/TransFormOver.cs
@@ -1606,6 +1606,27 @@ private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangl
             }
         }
 
+        /// <summary>
+        /// 줄바꿈 판단에 쓰는 길이. 세로는 높이, 가로는 너비를 본다.
+        /// </summary>
+        private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)
+        {
+            using(GraphicsPath path = new GraphicsPath())
+            {
+                path.AddString(text, font.FontFamily, (int)font.Style, emSize, new Point(0, 0), sf);
+                RectangleF bounds = path.GetBounds();
+                if(isVertical)
+                {
+                    // 세로 모드는 높이로 판단
+                    return bounds.Height;
+                }
+
+                // 가로 모드: MeasureString과 GraphicsPath 중 더 큰 값 사용
+                SizeF ms = g.MeasureString(text, font);
+                return Math.Max(bounds.Width, ms.Width);
+            }
+        }
+
         private List<string> GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)
         {
             List<string> lines = new List<string>();
@@ -1621,39 +1642,27 @@ private List<string> GetWrappedLinesByAddString(Graphics g, string text, Font fo
                 string remaining = originalLine;
                 while(!string.IsNullOrEmpty(remaining))
                 {
-                    int lastFit = 0;
-                    for(int i = 1; i <= remaining.Length; i++)
+                    // 글자를 더할수록 길이는 줄어들 수 없으므로 들어가는 길이는 항상 앞쪽 구간이다.
+                    // 1부터 하나씩 재면 한 줄마다 글자 수만큼 측정하게 되고, 이 함수가
+                    // 폰트 이분탐색 안에서 수십 번 반복되어 페인트 한 번이 통째로 느려진다.
+                    // 결과는 같고 측정 횟수만 줄이도록 이분 탐색으로 찾는다.
+                    int low = 0;
+                    int high = remaining.Length;
+                    while(low < high)
                     {
-                        string sub = remaining.Substring(0, i);
-                        float width;
-                        if(isVertical)
+                        int middle = (low + high + 1) / 2;
+                        if(GetFitSize(g, remaining.Substring(0, middle), font, emSize, sf, isVertical)
+                            > (isVertical ? maxHeight - fudge : maxWidth - fudge))
                         {
-                            // 세로 모드: GraphicsPath 기준
-                            using(GraphicsPath path = new GraphicsPath())
-                            {
-                                path.AddString(sub, font.FontFamily, (int)font.Style, emSize, new Point(0, 0), sf);
-                                RectangleF bounds = path.GetBounds();
-                                width = bounds.Height; // 세로 모드는 높이로 판단
-                            }
-                            if(width > maxHeight - fudge)
-                                break;
+                            high = middle - 1;
                         }
                         else
                         {
-                            // 가로 모드: MeasureString과 GraphicsPath 중 더 큰 값 사용
-                            using(GraphicsPath path = new GraphicsPath())
-                            {
-                                path.AddString(sub, font.FontFamily, (int)font.Style, emSize, new Point(0, 0), sf);
-                                RectangleF bounds = path.GetBounds();
-                                SizeF ms = g.MeasureString(sub, font);
-                                width = Math.Max(bounds.Width, ms.Width);
-                            }
-                            if(width > maxWidth - fudge)
-                                break;
+                            low = middle;
                         }
-
-                        lastFit = i;
                     }
+
+                    int lastFit = low;
                     if(lastFit == 0) lastFit = 1;
                     lines.Add(remaining.Substring(0, lastFit));
                     if(lastFit >= remaining.Length)
@@ -1734,12 +1743,16 @@ private void DoUpdatePaint()
 
                 if(bitmap == null || bitmap.Width != this.Width || bitmap.Height != Height)
                 {
+                    //Bitmap 은 네이티브 GDI+ 자원을 들고 있어서 놓아주지 않으면 파이널라이저까지 남는다.
+                    //OCR 영역을 끌면 창 크기가 계속 바뀌어 큰 비트맵이 매번 새로 생기므로,
+                    //여기서 안 버리면 GDI+ 자원이 말라 그리기가 실패하고 창이 검게 남는다.
+                    bitmap?.Dispose();
                     bitmap = new Bitmap(this.Width, this.Height, System.Drawing.Imaging.PixelFormat.Format32bppArgb);
                 }
 
                 using(Graphics gF = Graphics.FromImage(bitmap))
+                using(SolidBrush brush = new SolidBrush(Color.FromArgb(0, 240, 248, 255)))
                 {
-                    SolidBrush brush = new SolidBrush(Color.FromArgb(0, 240, 248, 255));
                     gF.FillRectangle(brush, 0, 0, bitmap.Width, bitmap.Height);
                 }
 
@@ -1755,7 +1768,8 @@ private void DoUpdatePaint()
                 blend.SourceConstantAlpha = 255;
                 blend.AlphaFormat = AC_SRC_ALPHA;
 
-                Graphics g = Graphics.FromImage(bitmap);
+                //페인트마다 만들어지므로 놓아주지 않으면 GDI+ 자원이 계속 쌓인다
+                using Graphics g = Graphics.FromImage(bitmap);
                 Color OutlineForeColor = FormManager.Instace.MyMainForm.MySettingManager.OutLineColor1;
                 float OutlineWidth = 2;
                 using(GraphicsPath gp = new GraphicsPath())
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index 8645cec..cd5377a 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T05:55:53Z","sourceFileCount":145,"typeCount":245,"methodCount":1445,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1853},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2187,"updatedUtc":"2026-08-04T05:55:46Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetWrappedLinesByAddString","line":1608,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1669,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1710,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1857,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1863,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1876,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1884,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1904,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1915,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1920,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1925,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1937,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1981,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2094,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2101,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2109,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2119,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2126,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2132,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2149,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2153,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2159,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2164,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2169,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2174,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.","페인트가 만드는 Bitmap과 Graphics는 네이티브 GDI+ 자원을 들고 있어 반드시 놓아준다. 창 크기가 바뀔 때 이전 Bitmap을 버리지 않으면, OCR 영역을 끄는 동안 큰 비트맵이 매 페인트마다 새로 생겨 자원이 마르고 그리기가 실패해 레이어드 윈도우가 검게 남는다.","줄바꿈 길이는 이분 탐색으로 찾는다. 글자를 더할수록 길이는 줄어들 수 없어 들어가는 길이가 항상 앞쪽 구간이므로 결과가 선형 탐색과 같다. 이 함수는 폰트 이분 탐색 안에서 블록마다 수십 번 반복되어, 1부터 하나씩 재면 페인트 한 번이 통째로 느려진다. 실측으로 블록 세 개 기준 폰트 탐색이 140ms에서 47ms로 줄었다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T06:10:11Z","sourceFileCount":145,"typeCount":245,"methodCount":1446,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1867},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2201,"updatedUtc":"2026-08-04T06:10:11Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetFitSize","line":1612,"signature":"private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)"},{"access":"private","name":"GetWrappedLinesByAddString","line":1629,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1678,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1719,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1871,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1877,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1890,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1898,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1918,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1929,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1934,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1939,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1951,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1995,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2108,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2115,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2123,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2133,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2140,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2146,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2163,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2167,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2173,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2178,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2183,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2188,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";

From a0648376ec9d707622dc35273b7fa73408ab4f69 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 19:21:12 +0900
Subject: [PATCH 5/6] =?UTF-8?q?=EC=98=A4=EB=B2=84=EB=A0=88=EC=9D=B4=20?=
 =?UTF-8?q?=EB=B2=88=EC=97=AD=EC=B0=BD=20=EC=86=8D=EB=8F=84=20=EA=B0=9C?=
 =?UTF-8?q?=EC=84=A0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 AGENTS.md                                     |  86 ++++++++
 MORT/Form1.cs                                 |  18 +-
 MORT/Manager/OCRDataManager.cs                |   7 +-
 MORT/Model/Debug/OcrDebugSnapshotModel.cs     | 181 +++++++++++++++++
 MORT/Service/Debug/OcrDebugSnapshotService.cs |   4 +-
 .../ProcessTranslateService.cs                | 164 +++++++++++++---
 MORT/TransFormLayer.cs                        |  14 +-
 MORT/TransFormOver.cs                         | 185 ++++++++++++++++--
 docs/wiki/index.html                          |   2 +-
 9 files changed, 605 insertions(+), 56 deletions(-)
 create mode 100644 AGENTS.md
 create mode 100644 MORT/Model/Debug/OcrDebugSnapshotModel.cs

diff --git a/AGENTS.md b/AGENTS.md
new file mode 100644
index 0000000..7ee1fe5
--- /dev/null
+++ b/AGENTS.md
@@ -0,0 +1,86 @@
+# MORT 프로젝트 작업 규약
+
+## 프로젝트 성격
+MORT는 2013년부터 이어진 장기 유지보수 프로젝트로, **옛날 방식과 현재 방식이 한 코드베이스 안에 혼재**되어 있다. 사용자 설정 파일 호환성, 기존 사용자층 보호, 점진적 리팩터링 중인 상태이기 때문에 한 번에 정리할 수 없다.
+
+## 작업 원칙
+
+### 1. 통일하려 들지 말 것
+- 작업 요청 범위를 벗어나서 "낡았으니 정리하자"는 식의 리팩터링 금지
+- 사용자가 명시적으로 요청할 때만 패턴을 통일한다
+- 버그 픽스/기능 추가는 **주변 코드 스타일을 그대로 따른다**
+- Newtonsoft.Json과 System.Text.Json이 같이 쓰여도, RestSharp와 HttpClient가 같이 쓰여도 통일하지 말 것
+
+### 2. 싱글톤과 DI 공존
+- `OcrManager.Instace`, `FormManager.Instace`, `TransManager._instance` 같은 싱글톤과 `Program.ServiceContainer`, `ConfigureServices`의 DI는 **공존하는 게 정상**
+- 새 매니저/서비스를 만들 땐 DI 우선
+- 기존 매니저를 호출할 땐 싱글톤 접근(`Instace`)을 자연스럽게 써도 된다
+- `TransManager`처럼 DI로 등록되어 있지만 `_instance`도 같이 유지하는 하이브리드 패턴도 OK
+
+### 3. 호환성 묶인 구조 보존 (절대 변경 금지)
+- `SettingManager.TransType` enum 순서 (`google_url`, `db`, `papago_web`, `naver`, `google`, `deepl`, `deeplApi`, `gemini`, `ezTrans`, `customApi`)
+- `SettingManager.OcrType` enum 순서 (`Tesseract=0`, `Window=1`, `OneOcr=2`, `Google=3`, `EasyOcr=4`)
+- `SettingManager.Skin` enum 순서 (`dark`, `layer`, `over`)
+- `@KEY ` 프리픽스 기반 텍스트 키-값 설정 포맷
+- 직렬화 키 이름
+- 코드 주석에도 "앞 소문자 바꾸면 안 됨 -> 기존 버전과 호환성"이라고 명시되어 있음
+
+### 4. 거대 파일은 그대로 둠
+점진적 분리 중인 상태로, 손대지 않는다:
+- `Form1.cs` (3441줄)
+- `SettingManager.cs` (1930줄)
+- `UIAdvencedOption.cs` (1190줄)
+- `TransManager.cs` (1246줄)
+- `FormManager.cs` (1152줄)
+- `AdvencedOptionManager.cs` (740줄)
+
+요청받은 작업 범위 외엔 분리/리팩터링하지 않는다.
+
+### 5. 새 기능 추가 위치
+최근 커밋 흐름을 따른다:
+- 비즈니스 로직 → `Service/` (e.g. `Service/Gemini/`, `Service/CustomApi/`)
+- 데이터 모델 → `Model/` (record 타입 선호)
+- DI 등록 → `Program.ConfigureServices`
+- 번역 API → `TransAPI/`
+- OCR API → `OcrApi/`
+
+### 6. 로컬라이즈 CSV 직접 수정 금지
+- `Resources/localize.csv`는 구글 스프레드 시트에서 관리한다
+- 코드 작업 중 `Resources/localize.csv`를 직접 수정하지 않는다
+
+## 프로젝트 구조 요약
+
+### 솔루션 (5개 프로젝트)
+1. **MORT** — 메인 WinForms 앱 (.NET 9, x64)
+2. **CloudVision** — Google Cloud Vision OCR 래퍼
+3. **GSTrans** — Google Sheets 번역기
+4. **PipeClient** — EzTrans 연동용 IPC
+5. **Updater** — 업데이트 모듈 (AnyCPU)
+
+### 핵심 디렉토리
+- **진입점**: `Program.cs` → DI 구성 → `Form1`
+- **Manager**: `OcrManager`(싱글톤), `TransManager`(DI+싱글톤 하이브리드), `FormManager`(싱글톤), `OCRDataManager`
+- **Service**: `Service/Gemini/`, `Service/CustomApi/`, `Service/TranslateTyp/`, `Service/PythonService/`, `Service/ProcessTranslateService/`
+- **번역 API**: `TransAPI/` (Google, Naver, Papago Web, DeepL, DeepL API, Gemini, EzTrans, CustomAPI)
+- **OCR API**: `OcrApi/OneOcr/`, `OcrApi/WindowOcr/`, `OcrApi/EasyOcr/` (+ Tesseract는 `MORT_CORE.DLL`)
+- **로컬라이즈**: `LocalizeManager/`, `Resources/localize.csv` (ko/en/ja/zh-CN/id/ru/pt/uk/tr)
+
+### 외부 의존성
+- `MORT_CORE.DLL`, `nhocr.DLL` — 별도 C++ 프로젝트, 빌드 후 릴리즈 폴더에 압축해제 필요
+- `Google.GenAI` 패키지는 있지만 Gemini는 직접 REST 호출 사용
+
+### 빌드
+- **x64 전용** (Updater만 AnyCPU)
+- `.NET 9` (`net9.0-windows10.0.22621.0`)
+- WinForms + WPF 동시 사용
+
+## 구현 위키 유지
+
+- 구현 전에 `docs/wiki/index.html`을 참조한다.
+- 위키는 단순 클래스 설명보다 구현 의도, 작동 방식, 실제 예시, 아직 답이 없는 질문을 우선한다.
+- 코드 변경으로 공통 의도·흐름·예시·질문의 답이 달라지면 `docs/wiki/wiki-content.json`을 같은 작업에서 수정한다.
+- 기능의 구현·작동 방식이 달라지면 `docs/wiki/feature-content.json`을 수정한다.
+- 자동 분류보다 구체적인 파일 설명이 필요하면 `docs/wiki/file-overrides.json`에 구현 의도와 작동 방식을 기록한다.
+- 모든 코드 작업이 끝나면 `powershell -NoProfile -ExecutionPolicy Bypass -File tools/update-wiki.ps1`을 실행한다.
+- 생성물인 `docs/wiki/index.html`은 직접 수정하지 않는다.
+- 빌드와 저장소 pre-commit hook도 위키를 자동 갱신한다.
diff --git a/MORT/Form1.cs b/MORT/Form1.cs
index 68a45a1..09c6e0d 100644
--- a/MORT/Form1.cs
+++ b/MORT/Form1.cs
@@ -821,7 +821,7 @@ public Form1(GeminiConfigMaker geminiConfigMaker, TranslateTypListService transl
                 //GDI+ 동작 여부 검사.
                 CheckGDI();
 
-                _processTranslateService = new ProcessTranslateService(this, _translateResultMemoryService, MySettingManager, loader, isAvailableWinOCR, StopTrans);
+                _processTranslateService = new ProcessTranslateService(this, _translateResultMemoryService, MySettingManager, loader, isAvailableWinOCR, isOnceTrans => StopTrans(isOnceTrans));
 
                 MakeLogo();
 
@@ -1182,7 +1182,8 @@ public void gHook_KeyDown(object sender, KeyEventArgs e)
                 }
                 else if (_processTranslateService.ProcessingState)
                 {
-                    StopTrans();
+                    //저수준 키보드 훅에서 부르는 자리다. 오래 붙잡히면 훅이 제거된다
+                    StopTrans(false, true);
                 }
             }
             //한 번만 번역하기
@@ -1195,7 +1196,8 @@ public void gHook_KeyDown(object sender, KeyEventArgs e)
                 }
                 else if (_processTranslateService.ProcessingState)
                 {
-                    _processTranslateService.PauseAndRestartTranslate(SetCaptureArea, OcrMethodType.Once);
+                    _processTranslateService.PauseAndRestartTranslate(SetCaptureArea, OcrMethodType.Once,
+                        ProcessTranslateService.KeyHookJoinTimeoutMs);
                 }
             }
 
@@ -1976,12 +1978,18 @@ public void StartTrnas(OcrMethodType ocrMethodType)
             MakeTransForm();
         }
 
-        public void StopTrans(bool isOnceTrans = false)
+        /// <param name="fromKeyHook">
+        /// 저수준 키보드 훅에서 불렸는지. 훅 프로시저가 300ms 넘게 붙잡히면
+        /// 윈도우가 훅을 제거해 이후 모든 단축키가 죽으므로 대기 시간을 짧게 잡는다.
+        /// </param>
+        public void StopTrans(bool isOnceTrans = false, bool fromKeyHook = false)
         {
             _processTrans = false;
 
             FormManager.Instace.MyRemoteController.ToggleStartButton(false);
-            _processTranslateService.StopTranslate();
+            _processTranslateService.StopTranslate(fromKeyHook
+                ? ProcessTranslateService.KeyHookJoinTimeoutMs
+                : ProcessTranslateService.DefaultJoinTimeoutMs);
 
             var transform = FormManager.Instace.GetITransform();
 
diff --git a/MORT/Manager/OCRDataManager.cs b/MORT/Manager/OCRDataManager.cs
index a9c046b..b553abf 100644
--- a/MORT/Manager/OCRDataManager.cs
+++ b/MORT/Manager/OCRDataManager.cs
@@ -951,6 +951,11 @@ public static OCRDataManager Instace
         public bool MergeLine { get; set; } = false;
 
 
+        /// <summary>
+        /// 목록만 복사해서 넘긴다. 원소는 그대로 공유한다.
+        /// 번역 스레드가 다음 회차에 ClearData 로 내부 목록을 비우기 때문에,
+        /// 내부 목록을 그대로 넘기면 번역창이 순회하는 도중에 비어버린다.
+        /// </summary>
         public List<ResultData> GetData()
         {
             List<ResultData> list = new List<ResultData>();
@@ -958,7 +963,7 @@ public List<ResultData> GetData()
             {
                 list.Add(dataList[i]);
             }
-            return dataList;
+            return list;
         }
 
         public ResultData GetData(int index)
diff --git a/MORT/Model/Debug/OcrDebugSnapshotModel.cs b/MORT/Model/Debug/OcrDebugSnapshotModel.cs
new file mode 100644
index 0000000..8091897
--- /dev/null
+++ b/MORT/Model/Debug/OcrDebugSnapshotModel.cs
@@ -0,0 +1,181 @@
+using System.Collections.Generic;
+using System.Drawing;
+
+namespace MORT.Model.Debug
+{
+    /// <summary>
+    /// 이미지 분석 결과를 나중에 다시 확인하기 위한 디버깅 스냅샷 모델.
+    /// 저장 전용이며 다시 읽어들이지 않기 때문에 키 이름은 호환성 제약이 없다.
+    /// </summary>
+    public record OcrDebugRect
+    {
+        public int X { get; init; }
+        public int Y { get; init; }
+        public int Width { get; init; }
+        public int Height { get; init; }
+        public int Right { get; init; }
+        public int Bottom { get; init; }
+
+        public static OcrDebugRect From(Rectangle rect)
+        {
+            return new OcrDebugRect
+            {
+                X = rect.X,
+                Y = rect.Y,
+                Width = rect.Width,
+                Height = rect.Height,
+                Right = rect.Right,
+                Bottom = rect.Bottom,
+            };
+        }
+    }
+
+    public record OcrDebugWord
+    {
+        public string Text { get; init; } = "";
+        public OcrDebugRect Rect { get; init; }
+    }
+
+    public record OcrDebugLine
+    {
+        public int GroupIndex { get; init; }
+        public string LineString { get; init; } = "";
+        public string TransString { get; init; } = "";
+        public string AngleType { get; init; } = "";
+        public OcrDebugRect LineRect { get; init; }
+        public List<OcrDebugWord> Words { get; init; } = new();
+        public List<string> TransWords { get; init; } = new();
+    }
+
+    /// <summary>
+    /// 오버레이가 하나의 블록으로 그리는 번역 문장 단위.
+    /// </summary>
+    public record OcrDebugTransBlock
+    {
+        public int Index { get; init; }
+        public string Trans { get; init; } = "";
+        public bool IsTitle { get; init; }
+        public string AngleType { get; init; } = "";
+        public OcrDebugRect LineRect { get; init; }
+        public OcrDebugRect SourceRect { get; init; }
+        public OcrDebugRect ViewRect { get; init; }
+        public OcrDebugRect ContentRect { get; init; }
+        public List<OcrDebugLine> Lines { get; init; } = new();
+    }
+
+    public record OcrDebugAutoColor
+    {
+        public string Font { get; init; } = "";
+        public string Background { get; init; } = "";
+    }
+
+    /// <summary>
+    /// OCR 영역 하나의 인식 결과.
+    /// </summary>
+    public record OcrDebugArea
+    {
+        public int Index { get; init; }
+        public bool SnapShot { get; init; }
+        /// <summary>화면 좌표 기준 OCR 영역.</summary>
+        public OcrDebugRect AreaRect { get; init; }
+        /// <summary>캡쳐 이미지 좌표 기준 인식 결과 전체 영역.</summary>
+        public OcrDebugRect ResultRect { get; init; }
+        public string OcrText { get; init; } = "";
+        public string TransText { get; init; } = "";
+        public bool UseAutoColor { get; init; }
+        public List<OcrDebugAutoColor> AutoColors { get; init; } = new();
+        public List<OcrDebugLine> Lines { get; init; } = new();
+        public List<OcrDebugTransBlock> TransBlocks { get; init; } = new();
+    }
+
+    /// <summary>
+    /// 오버레이가 실제로 그린 블록 하나의 최종값.
+    /// </summary>
+    public record OcrDebugOverlayBlock
+    {
+        public int AreaIndex { get; init; }
+        public int ColorIndex { get; init; }
+        public string Text { get; init; } = "";
+        public bool IsTitle { get; init; }
+        public bool VerticalMode { get; init; }
+
+        /// <summary>이하 모두 오버레이 폼 클라이언트 좌표.</summary>
+        public OcrDebugRect CaptureRect { get; init; }
+        public OcrDebugRect SourceRect { get; init; }
+        public OcrDebugRect ViewRect { get; init; }
+        public OcrDebugRect ContentRect { get; init; }
+
+        public string FontFamily { get; init; } = "";
+        public string FontStyle { get; init; } = "";
+        /// <summary>실제로 그린 폰트 크기(pt).</summary>
+        public float FontSize { get; init; }
+        /// <summary>자동 크기 계산의 목표값(pt).</summary>
+        public float PreferredFontSize { get; init; }
+        public float MinimumFontSize { get; init; }
+        /// <summary>원문에서 추정한 폰트 크기(pt).</summary>
+        public float SourceFontSize { get; init; }
+
+        public string FontColor { get; init; } = "";
+        public string BackgroundColor { get; init; } = "";
+        public bool DrawBackground { get; init; }
+        public bool UseAutoColor { get; init; }
+        public bool ContrastCorrected { get; init; }
+        public bool UseOutline { get; init; }
+        public string OutlineColor1 { get; init; } = "";
+        public string OutlineColor2 { get; init; } = "";
+
+        /// <summary>줄바꿈까지 끝난 최종 출력 줄.</summary>
+        public List<string> WrappedLines { get; init; } = new();
+        public float LineAdvance { get; init; }
+        /// <summary>최소 폰트로도 들어가지 않아 잘린 상태.</summary>
+        public bool Clipped { get; init; }
+    }
+
+    /// <summary>
+    /// 페인트 한 번의 구간별 시간. 오버레이가 UI 스레드를 얼마나 잡고 있는지 확인용.
+    /// </summary>
+    public record OcrDebugPaintTiming
+    {
+        /// <summary>DoUpdatePaint 전체.</summary>
+        public double TotalMs { get; init; }
+        /// <summary>창 크기·위치 계산.</summary>
+        public double CheckSizeMs { get; init; }
+        /// <summary>레이아웃·폰트 탐색·드로잉(AddText).</summary>
+        public double LayoutAndDrawMs { get; init; }
+        /// <summary>GetHbitmap + UpdateLayeredWindow.</summary>
+        public double PresentMs { get; init; }
+        /// <summary>이 페인트에서 텍스트 측정을 재사용한 횟수.</summary>
+        public int MeasureCacheHit { get; init; }
+        /// <summary>실제로 GDI+ 측정을 돌린 횟수.</summary>
+        public int MeasureCacheMiss { get; init; }
+    }
+
+    public record OcrDebugOverlayInfo
+    {
+        public OcrDebugPaintTiming Timing { get; init; }
+        public OcrDebugRect FormRect { get; init; }
+        public bool IsAutoFontSize { get; init; }
+        public int MinAutoFontSize { get; init; }
+        public int MaxAutoFontSize { get; init; }
+        public bool KeepSourceDirection { get; init; }
+        public bool UseFontOutline { get; init; }
+        public bool AutoColor { get; init; }
+        public bool AutoBackgroundColor { get; init; }
+        public bool AutoFontColor { get; init; }
+        public bool UseBackColor { get; init; }
+        public List<OcrDebugOverlayBlock> Blocks { get; init; } = new();
+    }
+
+    public record OcrDebugSnapshotModel
+    {
+        public string CapturedAt { get; init; } = "";
+        public string Skin { get; init; } = "";
+        public string OcrType { get; init; } = "";
+        public string TransType { get; init; } = "";
+        public string OcrText { get; init; } = "";
+        public string TransText { get; init; } = "";
+        public List<OcrDebugArea> Areas { get; init; } = new();
+        /// <summary>오버레이 스킨일 때만 채워진다.</summary>
+        public OcrDebugOverlayInfo Overlay { get; init; }
+    }
+}
diff --git a/MORT/Service/Debug/OcrDebugSnapshotService.cs b/MORT/Service/Debug/OcrDebugSnapshotService.cs
index f4e9f91..ee20278 100644
--- a/MORT/Service/Debug/OcrDebugSnapshotService.cs
+++ b/MORT/Service/Debug/OcrDebugSnapshotService.cs
@@ -110,12 +110,14 @@ public void CaptureOcrResult(
         /// <summary>
         /// 오버레이가 실제로 그린 최종값을 채우고 파일로 저장한다.
         /// </summary>
-        public void CompleteOverlay(Rectangle formRect, bool useBackColor, List<OcrDebugOverlayBlock> blocks)
+        public void CompleteOverlay(Rectangle formRect, bool useBackColor, List<OcrDebugOverlayBlock> blocks,
+            OcrDebugPaintTiming timing = null)
         {
             try
             {
                 var overlay = new OcrDebugOverlayInfo
                 {
+                    Timing = timing,
                     FormRect = OcrDebugRect.From(formRect),
                     IsAutoFontSize = AdvencedOptionManager.IsAutoFontSize,
                     MinAutoFontSize = AdvencedOptionManager.MinAutoFontSize,
diff --git a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
index 216d1bd..f554ab1 100644
--- a/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
+++ b/MORT/Service/ProcessTranslateService/ProcessTranslateService.cs
@@ -27,6 +27,19 @@ internal class ProcessTranslateService
         public bool ProcessingState => thread != null && thread.IsAlive;
 
         public int OcrProcessSpeed { get; set; } = 2000; //ocr 처리 딜레이 시간
+
+        //OCR 결과가 직전과 같을 때 번역창을 다시 그리는 최소 간격.
+        //내용이 같아도 창 기하가 바뀔 수 있어 완전히 멈추지는 않는다.
+        private const int IdleRepaintIntervalMs = 1000;
+
+        //작업을 기다리는 도중 중단 요청이 왔는지 확인하는 간격
+        private const int StopCheckIntervalMs = 50;
+
+        //정지 요청 후 이 스레드가 끝나기를 기다리는 한도.
+        //저수준 키보드 훅 프로시저가 300ms 넘게 붙잡히면 윈도우가 훅을 제거해
+        //이후 MORT 단축키가 전부 죽는다. 그래서 훅에서 온 요청은 더 짧게 기다린다.
+        public const int KeyHookJoinTimeoutMs = 250;
+        public const int DefaultJoinTimeoutMs = 3000;
         public bool ClipeBoardReady { get; private set; } = true;
 
         public bool DebugUnlockOCRSpeed
@@ -83,6 +96,66 @@ public ProcessTranslateService(Form parent, TranslateResultMemoryService memoryS
             this.OnStopTranslate = OnStopTranslate;
         }
 
+        /// <summary>
+        /// 작업이 끝나기를 기다리되, 중단 요청이 오면 기다리기를 멈춘다.
+        /// 작업 자체를 취소하지는 못하지만, 여기서 계속 붙잡고 있으면 isEndFlag 를 확인할 기회가 없어
+        /// 이 스레드가 끝나지 않는다. UI 는 thread.Join() 으로 이 스레드를 기다리는 중이라 같이 멈춘다.
+        /// </summary>
+        private TResult WaitForResult<TResult>(Task<TResult> task)
+        {
+            WaitForCompletion(task);
+            return task.Result;
+        }
+
+        private void WaitForCompletion(Task task)
+        {
+            while (true)
+            {
+                bool completed;
+                try
+                {
+                    completed = task.Wait(StopCheckIntervalMs);
+                }
+                catch (AggregateException e) when (e.InnerException is OperationCanceledException)
+                {
+                    //작업이 취소로 끝난 것은 오류가 아니다.
+                    //그대로 두면 아래 일반 예외 처리로 흘러가 정지할 때마다 오류창이 뜬다.
+                    throw new OperationCanceledException();
+                }
+
+                if (completed)
+                {
+                    return;
+                }
+
+                if (isEndFlag)
+                {
+                    throw new OperationCanceledException();
+                }
+            }
+        }
+
+        /// <summary>
+        /// 번역 스레드가 끝나기를 기다린다. 시간 안에 끝나지 않으면 false.
+        /// 시간 초과 시 호출부는 뒷작업을 진행하면 안 된다. 아직 살아있는 스레드와 설정 변경이 겹친다.
+        /// </summary>
+        private bool JoinThread(int timeoutMs)
+        {
+            if (thread == null || !thread.IsAlive)
+            {
+                return true;
+            }
+
+            isEndFlag = true;
+            if (thread.Join(timeoutMs))
+            {
+                return true;
+            }
+
+            Util.ShowLog($"ProcessTranslateService: 번역 스레드가 {timeoutMs}ms 안에 끝나지 않았다");
+            return false;
+        }
+
         private string AdjustText(string text)
         {
             string result = text;
@@ -176,7 +249,7 @@ private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResult
 
             transTask = TransManager.Instace.StartTrans(currentOcr, _settingManager.NowTransType, ocrList);
             //번역 결과를 적용한다
-            var transResult = transTask.Result;
+            var transResult = WaitForResult(transTask);
 
             if (ocrResultData != null)
             {
@@ -346,10 +419,14 @@ public void DoTextToSpeach(string text)
         }
 
         /// <summary>
-        /// 실제 OCR 번역을 시작한다
+        /// 실제 OCR 번역을 시작한다.
+        /// 이 메서드는 전용 스레드 위에서 끝까지 동기로 돌아야 한다.
+        /// async Task 로 두고 여기에 await 를 넣으면 스레드가 첫 await 에서 끝나버려
+        /// thread.Join() 이 즉시 돌아오고 IdleState / ProcessingState 가 거짓을 보고한다.
+        /// 그러면 정지했다고 판단한 쪽이 아직 살아있는 파이프라인과 동시에 설정을 바꾼다.
         /// </summary>
         /// <param name="ocrMethodType"></param>
-        private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)
+        private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)
         {
             _cts.Cancel();
             _cts.Dispose();
@@ -368,6 +445,8 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
             string formerOcrString = ""; //바로 이전에 가져온 문장
             ClipeBoardReady = true;
             int lastTick = 0;
+            //OCR 결과가 그대로일 때 다시 그리는 간격
+            int lastIdleRepaintTick = 0;
             try
             {
                 while (isEndFlag == false)
@@ -415,7 +494,7 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
                                         var task = OcrManager.Instace.ProcessGoogleAsync(imgDataList[j]);
                                         string currentOcr = "";
 
-                                        var result = task.Result;
+                                        var result = WaitForResult(task);
 
                                         currentOcr = result.MainText;
                                         currentOcr = currentOcr.Replace("\r\n", "\n");
@@ -541,9 +620,9 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
                                     {
                                         Util.CheckTimeSpan(false);
 
-                                        var task = _oneOcr.ConvertToTextAsync(imgDataList[j].data, imgDataList[j].channels, imgDataList[j].x, imgDataList[j].y, imgDataList[j].Clear).ConfigureAwait(false);
+                                        var task = _oneOcr.ConvertToTextAsync(imgDataList[j].data, imgDataList[j].channels, imgDataList[j].x, imgDataList[j].y, imgDataList[j].Clear).AsTask();
 
-                                        var result = task.GetAwaiter().GetResult();
+                                        var result = WaitForResult(task);
 
                                         if (result == null)
                                         {
@@ -606,7 +685,8 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
 
                                     var prepareTask = OcrManager.Instace.PrepareEasyOcrAsync(_settingManager.EasyOcrCode, false, "torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu121");
 
-                                    Task.WaitAll(prepareTask);
+                                    //pip 설치는 오래 걸린다. 중단 요청이 오면 기다리기를 멈춘다
+                                    WaitForCompletion(prepareTask);
 
 
                                     Util.CheckTimeSpan(true);
@@ -721,7 +801,7 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
                                 if (_settingManager.NowTransType != SettingManager.TransType.db && formerOcrString.CompareTo(NowOcrString) != 0)
                                 {
                                     System.Threading.Tasks.Task<string> test = TransManager.Instace.StartTrans(NowOcrString, _settingManager.NowTransType);
-                                    finalTransResult = test.Result;
+                                    finalTransResult = WaitForResult(test);
                                 }
                             }
 
@@ -811,14 +891,23 @@ private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessI
                             else
                             {
                                 //이전과 같아서 그래픽만 갱신함.
-                                if (_settingManager.NowSkin == SettingManager.Skin.layer && FormManager.Instace.MyLayerTransForm != null)
+                                //같은 내용을 다시 그리는 것은 낭비지만, 데이터가 그대로여도 창 기하가
+                                //바뀌는 경우(OCR 영역 이동, 대상 창 이동)가 있어 완전히 멈출 수는 없다.
+                                //그래서 매번이 아니라 일정 간격으로만 다시 그린다.
+                                int idleDiff = Math.Abs(System.Environment.TickCount - lastIdleRepaintTick);
+                                if (idleDiff >= IdleRepaintIntervalMs)
                                 {
-                                    FormManager.Instace.MyLayerTransForm.UpdatePaint();
-                                }
+                                    lastIdleRepaintTick = System.Environment.TickCount;
 
-                                if (_settingManager.NowSkin == SettingManager.Skin.over && FormManager.Instace.MyOverTransForm != null)
-                                {
-                                    FormManager.Instace.MyOverTransForm.UpdatePaint();
+                                    if (_settingManager.NowSkin == SettingManager.Skin.layer && FormManager.Instace.MyLayerTransForm != null)
+                                    {
+                                        FormManager.Instace.MyLayerTransForm.UpdatePaint();
+                                    }
+
+                                    if (_settingManager.NowSkin == SettingManager.Skin.over && FormManager.Instace.MyOverTransForm != null)
+                                    {
+                                        FormManager.Instace.MyOverTransForm.UpdatePaint();
+                                    }
                                 }
 
                                 if (isOnce)
@@ -876,7 +965,7 @@ private void StartTranslationThread(OcrMethodType ocrMethodType)
                 return;
             }
 
-            thread = new Thread(() => DoTransAsync(ocrMethodType, initialization));
+            thread = new Thread(() => DoTrans(ocrMethodType, initialization));
             thread.Start();
         }
 
@@ -942,50 +1031,61 @@ private void SaveOcrResult(string transText, string ocrText)
 
         public void ProcessTrans(OcrMethodType ocrMethodType) //번역 시작 쓰레드
         {
-            if (thread != null && thread.IsAlive == true)
+            if (!JoinThread(DefaultJoinTimeoutMs))
             {
-                isEndFlag = true;
-                thread.Join();
-
-                isEndFlag = false;
+                //이전 스레드가 아직 살아있다. 여기서 새로 시작하면 둘이 같이 돌게 된다.
+                //isEndFlag 는 되돌리지 않는다. 되돌리면 그 스레드가 계속 돈다.
+                return;
             }
 
+            isEndFlag = false;
             StartTranslationThread(ocrMethodType);
         }
 
-        public void StopTranslate()
+        public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)
         {
             _cts.Cancel();
             _cts.Dispose();
             _cts = new CancellationTokenSource();
             TransManager.Instace.StopTrans();
-            if (thread != null && thread.IsAlive == true)
+
+            if (JoinThread(joinTimeoutMs))
             {
-                isEndFlag = true;
-                thread.Join();
                 thread = null;
+                isEndFlag = false;
             }
 
-
-            isEndFlag = false;
+            //시간 초과면 isEndFlag 를 true 로 남겨둔다.
+            //되돌리면 아직 살아있는 스레드가 정지 요청을 못 보고 계속 번역한다.
         }
 
         /// <summary>
         /// 작업을 처리한 후 번역 다시 시작 - 기존 번역이 없으면 무시
         /// </summary>
         /// <param name="callback"></param>
-        public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)
+        /// <returns>
+        /// 돌고 있던 번역을 멈췄다가 다시 시작했으면 true.
+        /// 제한 시간 안에 멈추지 못하면 callback 을 실행하지 않고 false 를 돌려준다.
+        /// 호출부는 "번역이 돌고 있지 않았다"와 같게 취급하게 되는데,
+        /// 그 경로가 대개 ProcessTrans 로 이어져 정지를 한 번 더 시도하므로 회복될 여지가 있다.
+        /// </returns>
+        public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None,
+            int joinTimeoutMs = DefaultJoinTimeoutMs)
         {
             _cts.Cancel();
             _cts.Dispose();
             _cts = new CancellationTokenSource();
             TransManager.Instace.StopTrans();
-            bool requireRestart = false;
-            if (thread != null && thread.IsAlive == true)
+            bool requireRestart = thread != null && thread.IsAlive;
+            if (requireRestart)
             {
-                requireRestart = true;
-                isEndFlag = true;
-                thread.Join();
+                if (!JoinThread(joinTimeoutMs))
+                {
+                    //번역 스레드가 아직 살아있다. 여기서 callback 을 실행하면
+                    //그 스레드가 쓰고 있는 설정과 캡쳐 영역을 동시에 바꾸게 된다.
+                    //isEndFlag 도 되돌리지 않는다.
+                    return false;
+                }
 
                 isEndFlag = false;
             }
diff --git a/MORT/TransFormLayer.cs b/MORT/TransFormLayer.cs
index faf40c6..9c1d559 100644
--- a/MORT/TransFormLayer.cs
+++ b/MORT/TransFormLayer.cs
@@ -359,11 +359,13 @@ private void DoUpdatePaint()
                 // Get handle to the new bitmap and select it into the current 
                 // device context.
 
-                Bitmap bitmap = new Bitmap(this.Width, this.Height, System.Drawing.Imaging.PixelFormat.Format32bppArgb);
+                //Bitmap 과 Graphics 는 네이티브 GDI+ 자원을 들고 있어서 놓아주지 않으면
+                //페인트마다 파이널라이저까지 남는다. 아래 GC.Collect() 를 없애려면 여기가 먼저다.
+                using Bitmap bitmap = new Bitmap(this.Width, this.Height, System.Drawing.Imaging.PixelFormat.Format32bppArgb);
 
                 using(Graphics gF = Graphics.FromImage(bitmap))
+                using(SolidBrush brush = new SolidBrush(Color.FromArgb(0, 240, 248, 255)))
                 {
-                    SolidBrush brush = new SolidBrush(Color.FromArgb(0, 240, 248, 255));
                     gF.FillRectangle(brush, 0, 0, bitmap.Width, bitmap.Height);
                 }
 
@@ -379,7 +381,8 @@ private void DoUpdatePaint()
                 blend.SourceConstantAlpha = 255;
                 blend.AlphaFormat = AC_SRC_ALPHA;
 
-                Graphics g = Graphics.FromImage(bitmap);
+                //페인트마다 만들어지므로 놓아주지 않으면 GDI+ 자원이 계속 쌓인다
+                using Graphics g = Graphics.FromImage(bitmap);
                 Color OutlineForeColor = FormManager.Instace.MyMainForm.MySettingManager.OutLineColor1;
                 float OutlineWidth = 2;
                 using(GraphicsPath gp = new GraphicsPath())
@@ -507,7 +510,10 @@ private void DoUpdatePaint()
                     DeleteObject(hBitmap);
                 }
                 DeleteDC(memDc);
-                GC.Collect();
+
+                //여기서 GC.Collect() 를 돌리지 않는다.
+                //페인트마다 전체 블로킹 GC 가 UI 스레드에서 돌아 번역 중 끊김의 원인이 된다.
+                //위에서 Bitmap / Graphics / 브러시를 직접 놓아주고 GDI 핸들도 정리하므로 강제 수집이 필요 없다.
 
                 /*
             IntPtr screenDc = GetDC(IntPtr.Zero);
diff --git a/MORT/TransFormOver.cs b/MORT/TransFormOver.cs
index b8fecc2..c4c6e33 100644
--- a/MORT/TransFormOver.cs
+++ b/MORT/TransFormOver.cs
@@ -639,15 +639,14 @@ private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle recta
                     blockFormat, outlineColor1, outlineColor2, clipped));
             }
 
-            if(debugBlocks != null)
-            {
-                debugService.CompleteOverlay(
-                    Bounds,
-                    FormManager.Instace.MyMainForm.MySettingManager.NowIsUseBackColor,
-                    debugBlocks);
-            }
+            //스냅샷 저장은 DoUpdatePaint 가 화면 반영까지 끝낸 뒤에 한다.
+            //여기서 바로 넘기면 GetHbitmap / UpdateLayeredWindow 시간을 담을 수 없다.
+            _pendingDebugBlocks = debugBlocks;
         }
 
+        //AddText 가 모은 디버깅 블록. DoUpdatePaint 가 마지막에 넘긴다.
+        private List<OcrDebugOverlayBlock> _pendingDebugBlocks;
+
         /// <summary>
         /// 디버깅 스냅샷용 : 이 블록을 실제로 어떻게 그렸는지 최종값을 모은다.
         /// </summary>
@@ -1059,15 +1058,34 @@ private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List<Overlay
             }
         }
 
+        //폰트 크기 탐색을 여기서 멈춘다. 이보다 좁은 차이는 화면에서 구분되지 않는다.
+        //탐색 한 번이 문자열 전체를 다시 재는 비용이라 반복 횟수가 페인트 시간을 좌우한다.
+        private const float FontSearchEpsilon = 0.25f;
+
         private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)
         {
             float minimum = Math.Max(1, AdvencedOptionManager.MinAutoFontSize);
             float maximum = Math.Max(minimum, Math.Min(AdvencedOptionManager.MaxAutoFontSize, preferredSize));
 
+            //원하는 크기가 그대로 들어가면 더 볼 것이 없다.
+            //이분 탐색은 위 끝을 직접 시험하지 않아 이 흔한 경우에도 끝까지 돈다.
+            using(Font preferred = new Font(baseFont.FontFamily, maximum, baseFont.Style, GraphicsUnit.Point))
+            {
+                if(DoesTextFit(g, block.TransData.trans, preferred, contentRect, format, block.VerticalMode))
+                {
+                    return maximum;
+                }
+            }
+
             float low = minimum;
             float high = maximum;
             for(int iteration = 0; iteration < 9; iteration++)
             {
+                if(high - low <= FontSearchEpsilon)
+                {
+                    break;
+                }
+
                 float middle = (low + high) / 2f;
                 using Font candidate = new Font(baseFont.FontFamily, middle, baseFont.Style, GraphicsUnit.Point);
                 if(DoesTextFit(g, block.TransData.trans, candidate, contentRect, format, block.VerticalMode))
@@ -1606,11 +1624,57 @@ private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangl
             }
         }
 
+        //측정 결과를 재사용하기 위한 키.
+        //폰트 크기가 같으면 결과가 완전히 같은 호출이 폰트 이분탐색 때문에 대량으로 중복된다.
+        //세로 여부와 StringFormat 플래그가 빠지면 다른 방향의 결과를 잘못 돌려주므로 반드시 포함한다.
+        private readonly record struct TextMeasureKey(
+            string Text,
+            string FontFamily,
+            FontStyle FontStyle,
+            float EmSize,
+            bool Vertical,
+            StringFormatFlags FormatFlags,
+            StringAlignment Alignment);
+
+        private readonly record struct TextWrapKey(
+            string Text,
+            string FontFamily,
+            FontStyle FontStyle,
+            float EmSize,
+            int MaxWidth,
+            int MaxHeight,
+            bool Vertical,
+            StringFormatFlags FormatFlags,
+            StringAlignment Alignment);
+
+        //페인트 한 번 동안만 살아 있는 캐시. AddText 진입에서 만들고 끝나면 버린다.
+        private Dictionary<TextMeasureKey, float> _fitSizeCache;
+        private Dictionary<TextWrapKey, List<string>> _wrapCache;
+
+        //디버깅 계측용. 디버깅 저장이 꺼져 있으면 그냥 증가만 하고 쓰이지 않는다.
+        private int _measureCacheHit;
+        private int _measureCacheMiss;
+
         /// <summary>
         /// 줄바꿈 판단에 쓰는 길이. 세로는 높이, 가로는 너비를 본다.
         /// </summary>
         private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)
         {
+            TextMeasureKey key = default;
+            bool useCache = _fitSizeCache != null;
+            if(useCache)
+            {
+                key = new TextMeasureKey(text, font.FontFamily.Name, font.Style, emSize, isVertical, sf.FormatFlags, sf.Alignment);
+                if(_fitSizeCache.TryGetValue(key, out float cached))
+                {
+                    _measureCacheHit++;
+                    return cached;
+                }
+
+                _measureCacheMiss++;
+            }
+
+            float result;
             using(GraphicsPath path = new GraphicsPath())
             {
                 path.AddString(text, font.FontFamily, (int)font.Style, emSize, new Point(0, 0), sf);
@@ -1618,13 +1682,22 @@ private float GetFitSize(Graphics g, string text, Font font, float emSize, Strin
                 if(isVertical)
                 {
                     // 세로 모드는 높이로 판단
-                    return bounds.Height;
+                    result = bounds.Height;
+                }
+                else
+                {
+                    // 가로 모드: MeasureString과 GraphicsPath 중 더 큰 값 사용
+                    SizeF ms = g.MeasureString(text, font);
+                    result = Math.Max(bounds.Width, ms.Width);
                 }
+            }
 
-                // 가로 모드: MeasureString과 GraphicsPath 중 더 큰 값 사용
-                SizeF ms = g.MeasureString(text, font);
-                return Math.Max(bounds.Width, ms.Width);
+            if(useCache)
+            {
+                _fitSizeCache[key] = result;
             }
+
+            return result;
         }
 
         private List<string> GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)
@@ -1634,6 +1707,22 @@ private List<string> GetWrappedLinesByAddString(Graphics g, string text, Font fo
                 return lines;
 
             float emSize = g.DpiY * font.SizeInPoints / 72f;
+
+            TextWrapKey wrapKey = default;
+            bool useWrapCache = _wrapCache != null;
+            if(useWrapCache)
+            {
+                wrapKey = new TextWrapKey(text, font.FontFamily.Name, font.Style, emSize,
+                    maxWidth, maxHeight, isVertical, sf.FormatFlags, sf.Alignment);
+                if(_wrapCache.TryGetValue(wrapKey, out List<string> cachedLines))
+                {
+                    _measureCacheHit++;
+                    return cachedLines;
+                }
+
+                _measureCacheMiss++;
+            }
+
             float fudge = font.Size * 1.2f; // 픽셀 여유
 
             string[] originalLines = text.Replace("\r\n", "\n").Split('\n');
@@ -1670,12 +1759,23 @@ private List<string> GetWrappedLinesByAddString(Graphics g, string text, Font fo
                     remaining = remaining.Substring(lastFit).TrimStart();
                 }
             }
+
+            if(useWrapCache)
+            {
+                _wrapCache[wrapKey] = lines;
+            }
+
             return lines;
         }
 
         private bool isLockPaint = false;
         private bool _forceLock;
 
+        //페인트 구간별 시간(ms). 디버깅 저장이 켜진 동안에만 채워진다.
+        private double _checkSizeMs;
+        private double _layoutAndDrawMs;
+        private double _presentMs;
+
         public void UpdatePaint()
         {
             if(_forceLock)
@@ -1727,6 +1827,20 @@ private void DoUpdatePaint()
 
             isLockPaint = true;
 
+            //측정 결과는 이 페인트 안에서만 재사용한다.
+            //폰트 이분탐색이 같은 문자열을 같은 크기로 반복해서 재기 때문에 중복이 대부분이다.
+            _fitSizeCache = new Dictionary<TextMeasureKey, float>();
+            _wrapCache = new Dictionary<TextWrapKey, List<string>>();
+            _measureCacheHit = 0;
+            _measureCacheMiss = 0;
+
+            //계측은 디버깅 저장이 켜진 동안에만 한다
+            bool measureTiming = Form1.IsDebugSaveAnalysisResult;
+            var paintWatch = measureTiming ? System.Diagnostics.Stopwatch.StartNew() : null;
+            _checkSizeMs = 0;
+            _layoutAndDrawMs = 0;
+            _presentMs = 0;
+
             // Get device contexts
             IntPtr screenDc = IntPtr.Zero;
             IntPtr memDc = IntPtr.Zero;
@@ -1734,7 +1848,13 @@ private void DoUpdatePaint()
             IntPtr hOldBitmap = IntPtr.Zero;
             try
             {
+                var sectionWatch = measureTiming ? System.Diagnostics.Stopwatch.StartNew() : null;
                 CheckSizeAndLocation();
+                if(measureTiming)
+                {
+                    _checkSizeMs = sectionWatch.Elapsed.TotalMilliseconds;
+                }
+
                 Util.ShowLog("Update paint + " + makeIndex);
 
                 screenDc = GetDC(IntPtr.Zero);
@@ -1793,7 +1913,12 @@ private void DoUpdatePaint()
                     g.PixelOffsetMode = PixelOffsetMode.HighQuality;
 
 
+                    var layoutWatch = measureTiming ? System.Diagnostics.Stopwatch.StartNew() : null;
                     AddText(gp, g, textFont, rectangle, sf);
+                    if(measureTiming)
+                    {
+                        _layoutAndDrawMs = layoutWatch.Elapsed.TotalMilliseconds;
+                    }
 
                     if(!_isStart)
                     {
@@ -1822,6 +1947,8 @@ private void DoUpdatePaint()
                     g.Clear(Color.FromArgb(0));
                 }
 
+                var presentWatch = measureTiming ? System.Diagnostics.Stopwatch.StartNew() : null;
+
                 hBitmap = bitmap.GetHbitmap(Color.FromArgb(0));  //Set the fact that background is transparent
                 hOldBitmap = SelectObject(memDc, hBitmap);
 
@@ -1846,6 +1973,10 @@ private void DoUpdatePaint()
                     );
                 //SetWindowPos(this.Handle, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS);
 
+                if(measureTiming)
+                {
+                    _presentMs = presentWatch.Elapsed.TotalMilliseconds;
+                }
             }
             finally
             {
@@ -1857,7 +1988,37 @@ private void DoUpdatePaint()
                     DeleteObject(hBitmap);
                 }
                 DeleteDC(memDc);
-                GC.Collect();
+
+                //여기서 GC.Collect() 를 돌리지 않는다.
+                //페인트마다 전체 블로킹 GC 가 UI 스레드에서 돌아 번역 중 끊김의 원인이 된다.
+                //이 함수가 만드는 Bitmap / Graphics / 브러시는 위에서 직접 놓아주고
+                //GDI 핸들은 DeleteObject / DeleteDC 로 정리하므로 강제 수집이 필요 없다.
+
+                _fitSizeCache = null;
+                _wrapCache = null;
+
+                //화면 반영까지 끝난 뒤에 디버깅 스냅샷을 넘긴다.
+                //중간 return 으로 빠져나온 경우에도 모아둔 블록은 버리고 대기 상태를 풀어야 한다.
+                if(_pendingDebugBlocks != null)
+                {
+                    var timing = new OcrDebugPaintTiming
+                    {
+                        TotalMs = paintWatch?.Elapsed.TotalMilliseconds ?? 0,
+                        CheckSizeMs = _checkSizeMs,
+                        LayoutAndDrawMs = _layoutAndDrawMs,
+                        PresentMs = _presentMs,
+                        MeasureCacheHit = _measureCacheHit,
+                        MeasureCacheMiss = _measureCacheMiss,
+                    };
+
+                    DebugSnapshotService?.CompleteOverlay(
+                        Bounds,
+                        FormManager.Instace.MyMainForm.MySettingManager.NowIsUseBackColor,
+                        _pendingDebugBlocks,
+                        timing);
+
+                    _pendingDebugBlocks = null;
+                }
 
                 //중간 return 이나 예외로 빠져나가도 잠금은 반드시 푼다.
                 //풀리지 않으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index cd5377a..2efa238 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.","페인트가 만드는 Bitmap과 Graphics는 네이티브 GDI+ 자원을 들고 있어 반드시 놓아준다. 창 크기가 바뀔 때 이전 Bitmap을 버리지 않으면, OCR 영역을 끄는 동안 큰 비트맵이 매 페인트마다 새로 생겨 자원이 마르고 그리기가 실패해 레이어드 윈도우가 검게 남는다.","줄바꿈 길이는 이분 탐색으로 찾는다. 글자를 더할수록 길이는 줄어들 수 없어 들어가는 길이가 항상 앞쪽 구간이므로 결과가 선형 탐색과 같다. 이 함수는 폰트 이분 탐색 안에서 블록마다 수십 번 반복되어, 1부터 하나씩 재면 페인트 한 번이 통째로 느려진다. 실측으로 블록 세 개 기준 폰트 탐색이 140ms에서 47ms로 줄었다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T06:10:11Z","sourceFileCount":145,"typeCount":245,"methodCount":1446,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":133},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":148},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":535},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":1867},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1519,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1838,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1846,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1935,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1949,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2074,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2215,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2228,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2693,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3069,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3442,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":40,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":68,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":378,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":553,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":643,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":730,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3632,"updatedUtc":"2026-08-04T03:58:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1297,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1302,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1307,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1319,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1324,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1329,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1334,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1339,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1377,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1406,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1412,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1432,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1453,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1465,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1477,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1489,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1515,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1527,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1541,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1551,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1574,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1605,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1633,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1644,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1652,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1697,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1707,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1737,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1743,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1755,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1797,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1801,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1825,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1895,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1978,"signature":"public void StopTrans(bool isOnceTrans = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2025,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2051,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2061,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2067,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2075,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2243,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2259,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2303,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2356,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2393,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2415,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2449,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2454,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2459,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2464,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2472,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2499,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2568,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2576,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2599,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2621,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2643,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2700,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2712,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2729,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2739,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2745,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2761,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2777,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2782,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2791,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2796,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2804,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2806,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2814,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2819,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2828,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2833,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2844,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2864,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2880,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2901,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2939,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2945,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2954,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2962,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2968,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2973,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2978,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3000,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3181,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3239,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3245,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3251,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3257,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3263,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3269,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3273,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3278,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3286,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3292,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3298,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3304,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3310,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3317,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3323,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3335,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3384,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3402,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3420,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3439,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3455,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3491,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3496,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3501,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3541,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3552,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3557,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3573,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3594,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3602,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3608,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3613,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3619,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1213,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":952,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":963,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":978,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":996,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1007,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1014,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1032,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1045,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1113,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1125,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1200,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":161,"updatedUtc":"2026-08-04T03:56:54Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":295,"updatedUtc":"2026-08-04T03:58:18Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 CompleteOverlay, Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"public","name":"CompleteOverlay","line":113,"signature":"public void CompleteOverlay(Rectangle formRect, bool useBackColor, List\u003cOcrDebugOverlayBlock\u003e blocks)"},{"access":"private","name":"Flush","line":150,"signature":"private void Flush()"},{"access":"private","name":"Save","line":166,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":185,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":224,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":246,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":271,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":289,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1003,"updatedUtc":"2026-08-04T05:55:53Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":62,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"AdjustText","line":85,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":151,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":278,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":296,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":333,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTransAsync","line":352,"signature":"private async Task DoTransAsync(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":867,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":882,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":900,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":941,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":955,"signature":"public void StopTranslate()"},{"access":"public","name":"PauseAndRestartTranslate","line":977,"signature":"public bool PauseAndRestartTranslate(Action callback, OcrMethodType ocrMethodType = OcrMethodType.None)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":933,"updatedUtc":"2026-08-02T08:48:46Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":522,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":538,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":544,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":552,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":590,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":597,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":606,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":650,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":763,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":770,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":776,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":783,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":790,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":798,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":803,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":808,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":834,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":842,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":851,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":861,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":871,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":878,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":883,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":888,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":896,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":914,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":919,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":925,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2201,"updatedUtc":"2026-08-04T06:10:11Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":710,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":782,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":831,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":860,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":889,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":897,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":906,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":912,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":970,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":978,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1061,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1084,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1115,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1133,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1141,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1160,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1208,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1222,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1234,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1253,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1258,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1492,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1524,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1567,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetFitSize","line":1612,"signature":"private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)"},{"access":"private","name":"GetWrappedLinesByAddString","line":1629,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1678,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1719,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":1871,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":1877,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":1890,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":1898,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":1918,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":1929,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":1934,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":1939,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":1951,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":1995,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2108,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2115,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2123,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2133,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2140,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2146,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2163,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2167,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2173,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2178,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2183,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2188,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다.","작업 스레드가 OCR과 번역 결과를 기다릴 때는 그냥 Result를 읽지 않고 짧은 간격으로 끊어 기다리며 중단 요청을 확인한다. 작업 자체를 취소하지는 못하지만, 기다리기를 멈춰야 종료 플래그를 볼 기회가 생기고 Join이 풀린다. 중단으로 기다리기를 그만두면 OperationCanceledException으로 루프를 빠져나간다.","Join에는 시간 제한이 있다. 시간 안에 끝나지 않으면 호출부는 뒷작업을 하지 않는다. 아직 살아있는 스레드와 설정·캡쳐 영역 변경이 겹치기 때문이다. 이때 종료 플래그도 되돌리지 않는다. 되돌리면 그 스레드가 정지 요청을 못 보고 계속 번역한다.","저수준 키보드 훅에서 온 정지 요청은 더 짧게 기다린다. 훅 프로시저가 300ms 넘게 붙잡히면 윈도우가 훅을 제거해 이후 모든 단축키가 죽는다.","DoTrans는 전용 스레드 위에서 끝까지 동기로 돌아야 한다. async Task로 두고 await를 넣으면 스레드가 첫 await에서 끝나 Join이 즉시 돌아오고 IdleState와 ProcessingState가 거짓을 보고한다. 그러면 정지했다고 판단한 쪽이 아직 살아있는 파이프라인과 동시에 설정을 바꾼다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.","페인트가 만드는 Bitmap과 Graphics는 네이티브 GDI+ 자원을 들고 있어 반드시 놓아준다. 창 크기가 바뀔 때 이전 Bitmap을 버리지 않으면, OCR 영역을 끄는 동안 큰 비트맵이 매 페인트마다 새로 생겨 자원이 마르고 그리기가 실패해 레이어드 윈도우가 검게 남는다. over와 layer 두 창 모두 같은 구조라 한쪽만 고치면 다른 쪽이 그대로 느리다.","페인트 끝에서 GC.Collect를 부르지 않는다. 페인트마다 전체 블로킹 GC가 UI 스레드에서 돌면 번역 중 끊김이 된다. 이 호출은 위의 자원 누수를 덮고 있던 것이라, 누수를 먼저 막은 뒤에 걷어내야 한다.","OCR 결과가 직전과 같으면 매번 다시 그리지 않고 일정 간격으로만 그린다. 내용이 같아도 OCR 영역이나 대상 창이 움직이면 위치를 따라가야 하므로 완전히 멈출 수는 없다.","줄바꿈 길이는 이분 탐색으로 찾는다. 글자를 더할수록 길이는 줄어들 수 없어 들어가는 길이가 항상 앞쪽 구간이므로 결과가 선형 탐색과 같다. 이 함수는 폰트 이분 탐색 안에서 블록마다 수십 번 반복되어, 1부터 하나씩 재면 페인트 한 번이 통째로 느려진다. 실측으로 블록 세 개 기준 폰트 탐색이 140ms에서 47ms로 줄었다.","텍스트 측정 결과는 페인트 한 번 동안만 캐시한다. 키에 세로 여부와 StringFormat 플래그가 빠지면 다른 방향의 결과를 잘못 돌려준다. 다만 폰트 이분 탐색은 매번 다른 크기를 재므로 캐시가 맞는 경우는 많지 않다. 실측상 이득은 블록 전체 경로 기준 1.2배(측정 1036회에서 862회)로, 그리기와 사후 검증이 탐색이 이미 잰 크기를 다시 재는 부분에서만 나온다.","Font 객체 캐시는 넣지 않았다. 실측으로 new Font는 2.4us, 텍스트 측정 한 번은 35.1us라 블록당 아홉 번 만들어도 전체의 0.6%다. 캐시한 Font를 using으로 놓아주면 다음 사용에서 예외가 나므로 위험만 남는다.","폰트 크기 탐색은 원하는 크기를 먼저 시험하고, 탐색 범위가 0.25pt보다 좁아지면 멈춘다. 이분 탐색은 위 끝을 직접 시험하지 않아 원하는 크기가 그대로 들어가는 흔한 경우에도 아홉 번을 다 돈다. 탐색 한 번이 문자열 전체를 다시 재는 비용이라 반복 횟수가 페인트 시간을 좌우한다. 0.25pt보다 좁은 차이는 화면에서 구분되지 않는다.","실제 앱에서 잰 페인트 한 번은 45.9ms였고 그중 레이아웃과 드로잉이 37.4ms로 81%였다. 측정 캐시 적중은 375회 중 9회로 2.3%에 그쳤다. 폰트 이분 탐색이 매번 다른 크기를 재기 때문이며, 그래서 캐시보다 탐색 횟수를 줄이는 쪽이 효과가 크다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다.","오버레이 정보에는 페인트 구간별 시간(전체·창 크기 계산·레이아웃과 드로잉·화면 반영)과 텍스트 측정 캐시 적중 횟수가 함께 들어간다. UI 스레드를 얼마나 잡고 있는지 화면을 보지 않고 판단하기 위한 값이며, 디버깅 저장이 켜진 동안에만 잰다. 스냅샷 전달은 화면 반영까지 끝난 뒤 DoUpdatePaint 마지막에 한다. AddText 안에서 넘기면 화면 반영 시간을 담을 수 없다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T10:10:39Z","sourceFileCount":145,"typeCount":246,"methodCount":1446,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugPaintTiming","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":137},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":152},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":168},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":541},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":2028},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1521,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1840,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1848,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1937,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1951,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2082,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2223,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2236,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2701,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3077,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3450,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":53,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":81,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":457,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":632,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":810,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3640,"updatedUtc":"2026-08-04T09:05:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1299,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1304,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1309,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1321,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1326,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1331,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1336,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1341,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1379,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1408,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1414,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1434,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1455,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1467,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1479,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1491,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1517,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1529,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1543,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1553,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1576,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1607,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1635,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1646,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1654,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1699,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1709,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1739,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1745,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1757,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1799,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1803,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1827,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1897,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1985,"signature":"public void StopTrans(bool isOnceTrans = false, bool fromKeyHook = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2033,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2059,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2069,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2075,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2083,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2251,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2267,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2311,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2364,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2401,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2423,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2457,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2462,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2467,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2472,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2480,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2507,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2576,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2584,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2607,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2629,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2651,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2708,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2720,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2737,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2747,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2753,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2769,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2785,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2790,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2799,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2804,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2812,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2814,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2822,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2827,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2836,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2841,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2852,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2872,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2888,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2909,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2947,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2953,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2962,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2970,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2976,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2981,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2986,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3008,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3189,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3247,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3253,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3259,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3265,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3271,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3277,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3281,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3286,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3294,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3300,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3306,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3312,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3318,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3325,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3331,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3343,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3392,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3410,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3428,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3447,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3463,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3499,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3504,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3509,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3549,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3560,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3565,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3581,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3602,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3610,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3616,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3621,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3627,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1218,"updatedUtc":"2026-08-04T06:46:36Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":959,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":968,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":983,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":1001,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1012,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1019,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1037,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1050,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1118,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1130,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1205,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":181,"updatedUtc":"2026-08-04T09:17:51Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugPaintTiming, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugPaintTiming","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":939,"updatedUtc":"2026-08-04T06:46:01Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":528,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":544,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":550,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":558,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":596,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":603,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":612,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":656,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":769,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":776,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":782,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":789,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":796,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":804,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":809,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":814,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":840,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":848,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":857,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":867,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":877,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":884,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":889,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":894,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":902,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":920,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":925,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":931,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2362,"updatedUtc":"2026-08-04T10:10:39Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":709,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":781,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":830,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":859,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":888,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":896,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":905,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":911,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":969,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":977,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1064,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1102,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1133,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1151,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1159,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1178,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1226,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1240,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1252,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1271,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1276,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1510,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1542,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1585,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetFitSize","line":1661,"signature":"private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)"},{"access":"private","name":"GetWrappedLinesByAddString","line":1702,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1778,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1819,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":2032,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":2038,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":2051,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":2059,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":2079,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":2090,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":2095,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":2100,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":2112,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":2156,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2269,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2276,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2284,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2294,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2301,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2307,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2324,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2328,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2334,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2339,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2344,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2349,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";

From 7e6314d8d5a0c0ca84ff490d94f6f7d30d861e33 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=EB=AA=BD=ED=82=A4=ED=95=B4=EB=93=9C?=
 <killkimno@hotmail.com>
Date: Tue, 4 Aug 2026 19:22:28 +0900
Subject: [PATCH 6/6] =?UTF-8?q?1.317=20=EA=B0=B1=EC=8B=A0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 MORT/Properties/Settings.Designer.cs | 6 +++---
 MORT/Properties/Settings.settings    | 6 +++---
 docs/wiki/index.html                 | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/MORT/Properties/Settings.Designer.cs b/MORT/Properties/Settings.Designer.cs
index 4022622..6b0070e 100644
--- a/MORT/Properties/Settings.Designer.cs
+++ b/MORT/Properties/Settings.Designer.cs
@@ -25,7 +25,7 @@ public static Settings Default {
         
         [global::System.Configuration.ApplicationScopedSettingAttribute()]
         [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-        [global::System.Configuration.DefaultSettingValueAttribute("1.316V")]
+        [global::System.Configuration.DefaultSettingValueAttribute("1.317V")]
         public string MORT_VERSION {
             get {
                 return ((string)(this["MORT_VERSION"]));
@@ -43,7 +43,7 @@ public string LAYER_TEXT {
         
         [global::System.Configuration.ApplicationScopedSettingAttribute()]
         [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-        [global::System.Configuration.DefaultSettingValueAttribute("1316")]
+        [global::System.Configuration.DefaultSettingValueAttribute("1317")]
         public int MORT_VERSION_VALUE {
             get {
                 return ((int)(this["MORT_VERSION_VALUE"]));
@@ -90,7 +90,7 @@ public string TOOLTIP_LIST {
         
         [global::System.Configuration.ApplicationScopedSettingAttribute()]
         [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-        [global::System.Configuration.DefaultSettingValueAttribute("2026 08 02")]
+        [global::System.Configuration.DefaultSettingValueAttribute("2026 08 04")]
         public string MORT_RELEASE {
             get {
                 return ((string)(this["MORT_RELEASE"]));
diff --git a/MORT/Properties/Settings.settings b/MORT/Properties/Settings.settings
index 8bef98c..a727261 100644
--- a/MORT/Properties/Settings.settings
+++ b/MORT/Properties/Settings.settings
@@ -3,14 +3,14 @@
   <Profiles />
   <Settings>
     <Setting Name="MORT_VERSION" Type="System.String" Scope="Application">
-      <Value Profile="(Default)">1.316V</Value>
+      <Value Profile="(Default)">1.317V</Value>
     </Setting>
     <Setting Name="LAYER_TEXT" Type="System.String" Scope="Application">
       <Value Profile="(Default)">MORT {0}
 레이어 번역창</Value>
     </Setting>
     <Setting Name="MORT_VERSION_VALUE" Type="System.Int32" Scope="Application">
-      <Value Profile="(Default)">1316</Value>
+      <Value Profile="(Default)">1317</Value>
     </Setting>
     <Setting Name="TOOLTIP_LIST" Type="System.String" Scope="Application">
       <Value Profile="(Default)">MORT를 처음 쓰시면 그 외-&gt; MORT 사용법을 확인해 주세요,
@@ -45,7 +45,7 @@ OCR 영역을 빠르게 추가하고 싶을 땐 빠른 OCR 영역을 사용하
 구글 OCR의 사용량은 실제 사용량과 다를 수 있습니다. 수시로 구글 콘솔에서 확인하셔야 합니다</Value>
     </Setting>
     <Setting Name="MORT_RELEASE" Type="System.String" Scope="Application">
-      <Value Profile="(Default)">2026 08 02</Value>
+      <Value Profile="(Default)">2026 08 04</Value>
     </Setting>
     <Setting Name="BASIC_TEXT" Type="System.String" Scope="Application">
       <Value Profile="(Default)">Monkeyhead's OCR Realtime TransLate {0}
diff --git a/docs/wiki/index.html b/docs/wiki/index.html
index 2efa238..02e8b82 100644
--- a/docs/wiki/index.html
+++ b/docs/wiki/index.html
@@ -59,7 +59,7 @@ <h1 id="title"></h1>
       <footer>기능 설명 <code>feature-content.json</code> · 파일 설명 <code>file-overrides.json</code> · 자동 생성 <code>update-wiki.ps1</code></footer>
     </main>
   </div>
-  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다.","작업 스레드가 OCR과 번역 결과를 기다릴 때는 그냥 Result를 읽지 않고 짧은 간격으로 끊어 기다리며 중단 요청을 확인한다. 작업 자체를 취소하지는 못하지만, 기다리기를 멈춰야 종료 플래그를 볼 기회가 생기고 Join이 풀린다. 중단으로 기다리기를 그만두면 OperationCanceledException으로 루프를 빠져나간다.","Join에는 시간 제한이 있다. 시간 안에 끝나지 않으면 호출부는 뒷작업을 하지 않는다. 아직 살아있는 스레드와 설정·캡쳐 영역 변경이 겹치기 때문이다. 이때 종료 플래그도 되돌리지 않는다. 되돌리면 그 스레드가 정지 요청을 못 보고 계속 번역한다.","저수준 키보드 훅에서 온 정지 요청은 더 짧게 기다린다. 훅 프로시저가 300ms 넘게 붙잡히면 윈도우가 훅을 제거해 이후 모든 단축키가 죽는다.","DoTrans는 전용 스레드 위에서 끝까지 동기로 돌아야 한다. async Task로 두고 await를 넣으면 스레드가 첫 await에서 끝나 Join이 즉시 돌아오고 IdleState와 ProcessingState가 거짓을 보고한다. 그러면 정지했다고 판단한 쪽이 아직 살아있는 파이프라인과 동시에 설정을 바꾼다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.","페인트가 만드는 Bitmap과 Graphics는 네이티브 GDI+ 자원을 들고 있어 반드시 놓아준다. 창 크기가 바뀔 때 이전 Bitmap을 버리지 않으면, OCR 영역을 끄는 동안 큰 비트맵이 매 페인트마다 새로 생겨 자원이 마르고 그리기가 실패해 레이어드 윈도우가 검게 남는다. over와 layer 두 창 모두 같은 구조라 한쪽만 고치면 다른 쪽이 그대로 느리다.","페인트 끝에서 GC.Collect를 부르지 않는다. 페인트마다 전체 블로킹 GC가 UI 스레드에서 돌면 번역 중 끊김이 된다. 이 호출은 위의 자원 누수를 덮고 있던 것이라, 누수를 먼저 막은 뒤에 걷어내야 한다.","OCR 결과가 직전과 같으면 매번 다시 그리지 않고 일정 간격으로만 그린다. 내용이 같아도 OCR 영역이나 대상 창이 움직이면 위치를 따라가야 하므로 완전히 멈출 수는 없다.","줄바꿈 길이는 이분 탐색으로 찾는다. 글자를 더할수록 길이는 줄어들 수 없어 들어가는 길이가 항상 앞쪽 구간이므로 결과가 선형 탐색과 같다. 이 함수는 폰트 이분 탐색 안에서 블록마다 수십 번 반복되어, 1부터 하나씩 재면 페인트 한 번이 통째로 느려진다. 실측으로 블록 세 개 기준 폰트 탐색이 140ms에서 47ms로 줄었다.","텍스트 측정 결과는 페인트 한 번 동안만 캐시한다. 키에 세로 여부와 StringFormat 플래그가 빠지면 다른 방향의 결과를 잘못 돌려준다. 다만 폰트 이분 탐색은 매번 다른 크기를 재므로 캐시가 맞는 경우는 많지 않다. 실측상 이득은 블록 전체 경로 기준 1.2배(측정 1036회에서 862회)로, 그리기와 사후 검증이 탐색이 이미 잰 크기를 다시 재는 부분에서만 나온다.","Font 객체 캐시는 넣지 않았다. 실측으로 new Font는 2.4us, 텍스트 측정 한 번은 35.1us라 블록당 아홉 번 만들어도 전체의 0.6%다. 캐시한 Font를 using으로 놓아주면 다음 사용에서 예외가 나므로 위험만 남는다.","폰트 크기 탐색은 원하는 크기를 먼저 시험하고, 탐색 범위가 0.25pt보다 좁아지면 멈춘다. 이분 탐색은 위 끝을 직접 시험하지 않아 원하는 크기가 그대로 들어가는 흔한 경우에도 아홉 번을 다 돈다. 탐색 한 번이 문자열 전체를 다시 재는 비용이라 반복 횟수가 페인트 시간을 좌우한다. 0.25pt보다 좁은 차이는 화면에서 구분되지 않는다.","실제 앱에서 잰 페인트 한 번은 45.9ms였고 그중 레이아웃과 드로잉이 37.4ms로 81%였다. 측정 캐시 적중은 375회 중 9회로 2.3%에 그쳤다. 폰트 이분 탐색이 매번 다른 크기를 재기 때문이며, 그래서 캐시보다 탐색 횟수를 줄이는 쪽이 효과가 크다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다.","오버레이 정보에는 페인트 구간별 시간(전체·창 크기 계산·레이아웃과 드로잉·화면 반영)과 텍스트 측정 캐시 적중 횟수가 함께 들어간다. UI 스레드를 얼마나 잡고 있는지 화면을 보지 않고 판단하기 위한 값이며, 디버깅 저장이 켜진 동안에만 잰다. 스냅샷 전달은 화면 반영까지 끝난 뒤 DoUpdatePaint 마지막에 한다. AddText 안에서 넘기면 화면 반영 시간을 담을 수 없다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T10:10:39Z","sourceFileCount":145,"typeCount":246,"methodCount":1446,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugPaintTiming","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":137},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":152},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":168},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":541},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":2028},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1521,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1840,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1848,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1937,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1951,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2082,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2223,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2236,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2701,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3077,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3450,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":53,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":81,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":457,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":632,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":810,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3640,"updatedUtc":"2026-08-04T09:05:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1299,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1304,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1309,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1321,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1326,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1331,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1336,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1341,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1379,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1408,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1414,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1434,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1455,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1467,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1479,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1491,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1517,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1529,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1543,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1553,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1576,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1607,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1635,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1646,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1654,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1699,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1709,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1739,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1745,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1757,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1799,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1803,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1827,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1897,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1985,"signature":"public void StopTrans(bool isOnceTrans = false, bool fromKeyHook = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2033,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2059,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2069,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2075,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2083,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2251,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2267,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2311,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2364,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2401,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2423,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2457,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2462,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2467,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2472,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2480,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2507,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2576,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2584,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2607,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2629,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2651,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2708,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2720,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2737,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2747,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2753,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2769,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2785,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2790,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2799,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2804,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2812,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2814,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2822,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2827,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2836,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2841,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2852,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2872,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2888,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2909,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2947,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2953,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2962,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2970,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2976,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2981,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2986,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3008,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3189,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3247,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3253,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3259,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3265,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3271,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3277,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3281,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3286,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3294,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3300,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3306,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3312,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3318,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3325,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3331,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3343,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3392,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3410,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3428,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3447,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3463,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3499,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3504,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3509,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3549,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3560,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3565,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3581,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3602,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3610,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3616,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3621,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3627,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1218,"updatedUtc":"2026-08-04T06:46:36Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":959,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":968,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":983,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":1001,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1012,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1019,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1037,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1050,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1118,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1130,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1205,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":181,"updatedUtc":"2026-08-04T09:17:51Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugPaintTiming, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugPaintTiming","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":939,"updatedUtc":"2026-08-04T06:46:01Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":528,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":544,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":550,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":558,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":596,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":603,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":612,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":656,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":769,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":776,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":782,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":789,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":796,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":804,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":809,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":814,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":840,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":848,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":857,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":867,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":877,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":884,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":889,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":894,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":902,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":920,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":925,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":931,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2362,"updatedUtc":"2026-08-04T10:10:39Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":709,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":781,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":830,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":859,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":888,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":896,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":905,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":911,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":969,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":977,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1064,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1102,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1133,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1151,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1159,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1178,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1226,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1240,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1252,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1271,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1276,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1510,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1542,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1585,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetFitSize","line":1661,"signature":"private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)"},{"access":"private","name":"GetWrappedLinesByAddString","line":1702,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1778,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1819,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":2032,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":2038,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":2051,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":2059,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":2079,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":2090,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":2095,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":2100,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":2112,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":2156,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2269,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2276,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2284,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2294,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2301,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2307,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2324,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2328,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2334,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2339,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2344,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2349,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
+  <script id="wiki-data" type="application/json">{"content":{"title":"MORT 구현 위키","subtitle":"코드의 모양보다, 왜 이렇게 존재하고 어떻게 안전하게 바꿀지를 기록한다.","purpose":["이 위키는 API 목록이나 클래스 주석을 대신하지 않는다. 구현 의도, 실제 실행 흐름, 변경 시 지켜야 할 경계, 재현 가능한 예시, 아직 답이 없는 질문을 우선한다.","사람이 판단해 기록한 내용은 이 파일에 유지하고, 파일·타입·DI·TODO 현황은 코드에서 자동 수집한다. 코드 반영률은 스캔 대상 C# 파일 중 파일별 상세에 포함된 비율이며, 수동 설명률은 file-overrides.json으로 직접 설명한 파일 비율이다.","코드 변경 후 위키가 사실과 달라졌다면 같은 작업 안에서 설명과 예시, 질문 상태를 함께 고친다."],"principles":[{"title":"공존은 부채가 아니라 호환 전략일 수 있다","intent":"2013년부터 이어진 사용자 설정과 호출 경로를 보호하면서 점진적으로 새 구조를 넣기 위해 싱글톤과 DI, 여러 JSON/HTTP 라이브러리가 함께 존재한다.","workingRule":"새 서비스는 DI를 우선하되 기존 매니저 호출은 주변 코드의 Instace 접근 방식을 따른다. 요청 범위 밖의 통일 리팩터링은 하지 않는다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs","MORT/Manager/FormManager.cs"]},{"title":"설정의 순서와 이름은 외부 데이터 계약이다","intent":"enum의 정수값, 직렬화 키, @KEY 프리픽스는 이미 배포된 설정 파일과 연결되어 있다. 코드 내부 표현처럼 보여도 사용자 데이터 형식이다.","workingRule":"TransType, OcrType, Skin의 순서를 바꾸거나 직렬화 키를 정리하지 않는다. 새 값이 필요하면 기존 값을 보존한 채 호환 방식부터 검토한다.","evidence":["MORT/SettingManager.cs"]},{"title":"거대 폼과 매니저는 요청 범위 안에서만 수정한다","intent":"대형 파일은 점진적 분리 중이며 UI 상태와 오래된 호출 순서를 함께 품고 있다. 작은 정리가 예상 밖의 동작 차이를 만들 수 있다.","workingRule":"버그 수정과 기능 추가는 주변 스타일을 따르고, 별도 요청 없이 파일 분리·이름 통일·전면 비동기화를 하지 않는다.","evidence":["MORT/Form1.cs","MORT/SettingManager.cs","MORT/UIAdvencedOption.cs"]},{"title":"로컬라이즈 원본은 코드 저장소 밖에서 관리된다","intent":"Resources/localize.csv의 원본 관리 장소는 Google Spreadsheet다.","workingRule":"코드 작업에서 localize.csv를 직접 고치지 않는다. 새 문구가 필요하면 기존 키를 재사용하거나 별도 로컬라이즈 반영 작업으로 남긴다.","evidence":["MORT/Resources/localize.csv","MORT/LocalizeManager"]}],"architecture":[{"name":"시작과 수명 관리","intent":"Program이 단일 실행 여부를 확인하고 DI 컨테이너를 만든 뒤 Form1을 애플리케이션 수명과 함께 유지한다. TransManager는 DI 생성 뒤 기존 정적 호출자를 위해 임시 인스턴스 연결도 수행한다.","how":"Program.Main → ConfigureServices → BuildServiceProvider → TransManager.TempInitalizeInstance → Application.Run(Form1)","examples":["새 서비스 등록은 Program.ConfigureServices에 추가한다.","Form1 수명과 같은 기능은 Singleton 등록이 현재 구조와 맞는지 먼저 확인한다."],"evidence":["MORT/Program.cs"]},{"name":"OCR 처리 파이프라인","intent":"여러 OCR 엔진과 다중 캡처 영역을 하나의 번역·표시 파이프라인으로 합치되 엔진별 준비 비용과 결과 좌표 차이를 보존한다.","how":"캡처 영역 준비 → 이미지 데이터 생성 → 선택 OCR 실행 → OCRDataManager에 위치/문장 저장 → 번역 입력 구성","examples":["실시간 번역은 같은 OCR 문장인지 비교해 불필요한 재번역을 줄인다.","Overlay 스킨은 문자 위치 정보가 필요하므로 단순 문자열 경로와 처리 방식이 다르다."],"evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs"]},{"name":"번역 선택과 결과 재사용","intent":"번역 제공자별 차이를 유지하면서 사용자 번역, 이전 결과 캐시, 분할 번역을 공통 진입점에서 조정한다.","how":"ProcessTranslateService → TransManager.StartTrans → 번역 종류별 API/DB/EzTrans 분기 → 결과 캐시 → 출력 폼 반영","examples":["Gemini는 긴 입력을 분할하는 별도 판단이 있다.","db와 ezTrans는 네트워크 번역기와 같은 경로로 억지로 통일하지 않는다."],"evidence":["MORT/Manager/TransManager.cs","MORT/TransAPI"]},{"name":"폼과 OCR 영역 소유권","intent":"여러 번역창, 캡처 영역, 예외 영역, 보조 UI의 생성·파괴 순서를 한곳에서 조정해 WinForms 객체 수명 충돌을 줄인다.","how":"FormManager가 폼 참조와 목록을 소유하고 기능 서비스는 필요한 폼을 요청하거나 상태를 조회한다.","examples":["마우스 따라가기 서비스는 전용 영역, 빠른 영역, 첫 일반 영역 순으로 대상을 선택한다.","폼이 null인지뿐 아니라 IsDisposed도 함께 확인한다."],"evidence":["MORT/Manager/FormManager.cs","MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs"]}],"flows":[{"name":"실시간 OCR → 번역 → 표시","steps":["사용자가 OCR 영역과 엔진을 선택한다.","ProcessTranslateService가 화면을 캡처하고 영역별 이미지 데이터를 만든다.","OcrManager 또는 엔진 래퍼가 문장과 위치를 반환한다.","OCRDataManager가 다중 영역 결과를 정렬·결합한다.","TransManager가 선택된 번역 방식으로 결과를 구한다.","FormManager가 현재 스킨의 번역창에 결과를 반영한다."],"watch":"UI 객체 접근, 동기 대기와 비동기 호출, 다중 OCR 인덱스, Overlay 좌표는 한 흐름에서 함께 영향을 받는다."},{"name":"새 번역 제공자 추가","steps":["기존 설정 enum의 순서를 보존할 추가 방식을 결정한다.","TransAPI에 제공자 호출 구현을 둔다.","필요한 구성·비즈니스 로직은 Service와 Model에 둔다.","Program.ConfigureServices에 필요한 수명을 등록한다.","TransManager의 선택, 캐시, 중지 처리 경로를 연결한다.","설정 저장/복원과 실패 메시지를 기존 사용자 파일로 검증한다."],"watch":"enum 추가는 직렬화 호환성 작업이다. API 호출 성공만으로 완료하지 말고 이전 설정 파일 로드를 확인한다."}],"examples":[{"scenario":"기존 매니저를 쓰는 새 서비스","preferred":"서비스 자체는 DI로 등록하고 생성자 주입을 사용한다. 다만 기존 폼 수명 조회가 필요하면 주변 구현처럼 FormManager.Instace를 사용해도 된다.","avoid":"요청과 무관하게 FormManager 전체를 인터페이스와 DI로 바꾸는 작업."},{"scenario":"OCR enum에 새 엔진을 추가","preferred":"기존 Tesseract=0, Window=1, OneOcr=2, Google=3, EasyOcr=4를 그대로 두고 새 값을 뒤에 추가한 뒤 구버전 설정을 읽는 테스트를 한다.","avoid":"화면 표시 순서에 맞춘다는 이유로 enum 멤버를 재정렬하는 작업."},{"scenario":"번역창 표시 버그 수정","preferred":"현재 Skin 분기와 FormManager의 폼 수명을 따라 최소 범위를 수정하고 dark/layer/over 및 다중 OCR을 확인한다.","avoid":"세 스킨을 한 번에 새 렌더링 구조로 합치는 작업."}],"questions":[{"status":"open","question":"ProcessTranslateService 내부의 Task.Result와 Task.WaitAll은 어떤 호출 경로에서 UI 교착 또는 취소 지연을 만들 수 있는가?","why":"오래된 스레드 모델과 async 코드가 공존하며, 전면 변경은 위험하지만 경계를 문서화할 필요가 있다.","next":"실시간, 1회 번역, EasyOCR 준비 경로별 실행 스레드를 추적한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"TransManager의 DI 인스턴스와 정적 Instace가 달라질 수 있는 생성 경로가 남아 있는가?","why":"하이브리드 구조 자체는 의도된 것이지만 인스턴스가 둘이면 캐시와 API 상태가 갈라질 수 있다.","next":"TempInitalizeInstance 이전 접근과 직접 new 호출을 검색한다.","evidence":["MORT/Program.cs","MORT/Manager/TransManager.cs"]},{"status":"open","question":"다중 OCR에서 한 영역만 결과가 바뀔 때 번역 갱신을 결정하는 최소 단위는 전체 문자열인가, 영역별 결과인가?","why":"최근 수정 이력에 다중 OCR 갱신 문제가 있으며 성능 최적화와 정확성의 경계가 된다.","next":"formerOcrString, NowOcrString, 영역 인덱스 조합 과정을 재현 테스트로 고정한다.","evidence":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"status":"open","question":"MORT_CORE.DLL과 nhocr.DLL의 버전 호환 조건을 저장소에서 검증할 수 있는가?","why":"외부 C++ 산출물이라 C# 빌드 성공만으로 실제 실행 호환성을 보장하지 못한다.","next":"릴리스 절차에서 해시 또는 파일 버전을 기록하는 방식을 검토한다.","evidence":["MORT/MORT.csproj"]}]},"features":[{"name":"OneOCR spatial merge and collision-safe overlay","intent":"Keep separate speech bubbles, names, and sentence boundaries independent while fitting translated text inside non-overlapping owned regions.","entry":"OCRDataManager.ResultData.InitLine and TransFormOver.AddText","implementation":["OneOCR word boxes are normalized from all four corners and rounded outward. Line font size uses the median short axis, and direction-specific spatial connected components are built before reading order is assigned.","Final translation blocks enforce a 1.2 source-font band, split explicit or contextual names and sentence terminators, and keep bullet or numbered list lines independent.","Each block carries SourceRect, ViewRect, and ContentRect. Overlay layout resolves the largest overlaps first, preserves title source regions, and chooses the lower-area-loss split axis.","Auto font size uses the same GraphicsPath wrapping model as rendering. Horizontal line height or vertical line width replaces word short-axis sampling; body blocks in the same OCR area and direction share one median preferred size, while explicit titles and a substantially larger leading title retain their own size.","The fit test lays every wrapped line into the exact slot the renderer will use, through the shared GetLineRect, and requires the resulting glyph ink to stay inside ContentRect. Summing line count and leading instead leaves out the space a line occupies inside its own slot: a vertical block once passed the check by 0.03px while the renderer needed 17px more, and because Rectangle.Intersect clips the slot but AddString does not clip glyphs, the text bled about 4px into the neighbouring block. Slots are measured unclipped here so that overflow stays visible to the test.","@OverlayUseFontOutline defaults to false. When enabled the overlay keeps the existing two-pass rounded outline; when disabled it removes Bold from the configured font style, excludes stroke padding from fit checks, and fills only the text path.","New overlay localization entries are staged in the repository-root AdditionKey.txt file as a key line followed by its Korean-value line, with a blank line between entries, while Resources/localize.csv remains spreadsheet-managed. UIAdvencedOption binds the new direction and font-outline controls to those localization keys.","Automatic background color first samples dominant colors from the four inner edge bands and four corner probes of every OCR word rectangle. A local candidate must be supported by multiple probes, and the block background must repeat across enough words. Only when that evidence is insufficient does sampling use a ring limited to 1-4 pixels and the SourceRect vicinity, then finally the SourceRect dominant color. Font color is sampled inside words against their local background, prioritizing word support before population and contrast.","Automatic color sampling scales SourceRect and word rectangles from OCR dimensions to separately stored original-buffer dimensions. Stable layout cache entries receive the newest frame colors.","TranslationProcessInitializationService owns per-request warning evaluation, OCR-mode selection, original-buffer requirements, and the synchronous ITransform.Prepare then StartTrans transition. ProcessTranslateService completes this initialization before creating the OCR worker thread, preventing the settings-confirm UI thread from joining a worker that is synchronously waiting for the same UI thread. The overlay Prepare implementation clears prior result data and layout cache, renders a transparent layered bitmap, and delegates DWM composition synchronization to OverlayRenderSynchronizationService; basic and layer windows currently require no preparation.","TranslationImageModelService owns attached-capture polling, native OCR-area extraction, managed ImgData creation, and optional four-channel original-buffer capture for automatic colors. ProcessTranslateService now orchestrates OCR and translation branches without copying native image buffers itself.","The source-direction option is declared with the neighboring WinForms controls in the designer, so all overlay settings use the same font/DPI autoscaling pass at runtime."],"operation":["Normalize OCR boxes and group lines by direction, font ratio, gap, overlap, and alignment.","Sort inside each spatial component and split title, name, sentence-terminated, list-marker, and source-font-band blocks.","Convert SourceRect to overlay coordinates and resolve all ViewRect intersections.","Choose horizontal translated text by default or preserve source direction when @OverlayKeepSourceDirection is enabled.","Apply the saved font-outline option before measuring: OFF uses regular-weight path fill, while ON measures and renders the current double outline.","Extract repeated inner-edge and corner background RGB, use a narrowly constrained word ring only as fallback, then extract word-level foreground RGB. Enforce the minimum contrast once after analysis and again against the actual automatic/manual color combination immediately before rendering.","Before snapshot or real-time translation starts, TranslationProcessInitializationService synchronously calls Prepare and then StartTrans on the caller side, and only then does ProcessTranslateService create the OCR worker thread. OverlayRenderSynchronizationService flushes composition only for the overlay window, so basic and layer windows do not carry a DwmFlush dependency.","Ask TranslationImageModelService for the current OCR-area models; use either live screen extraction or attached capture while retaining capture origin and optional original-color buffers.","Fit and render text inside ContentRect with a shared body-font target enlarged by 15%. A horizontal block claims collision-free space to the right only when its translated wrapped-line count exceeds the OCR source-line count; vertical fit failure alone never widens the block. It only expands downward to guarantee the configured minimum font, and when outlines are disabled ContentRect uses the full OCR region. Preserve non-overlap and clip with a diagnostic log if the minimum font still cannot fit.","When blocks that were not merged would overlap, the background is reduced first: ViewRect intersections are split so the filled regions become disjoint. The font is only reduced afterwards, and only because the fit test rejects a size whose glyphs would leave the narrowed ContentRect. Two separate reductions, in that order, keep a shrunk background from also forcing an unnecessarily small font."],"state":"ResultData owns translation blocks and current automatic colors; each TransData owns SourceRect, ViewRect, ContentRect, title state, and source direction.","failures":"If OCR boxes are inaccurate or two source regions are effectively identical, layout still prioritizes non-overlap. A block that cannot fit at minimum size is clipped and logged instead of covering another block. Retained background alpha can leave source glyphs visible even when sampled RGB is correct. A snapshot color buffer with fewer than three channels is treated as invalid instead of being misread as a black or white background. Missing automatic-color indices retain configured colors instead of drawing the old white-on-black sentinel pair.","example":"Interleaved vertical columns from upper and lower speech bubbles form separate components. A bullet line or a line ending with Japanese full stop plus closing quote closes its block before the next line. A purple badge in one word rectangle does not override black text repeated across the other words, and dense black glyphs in a narrow vertical OCR box do not override the pink speech-bubble color sampled around the box.","files":["MORT/Interface/ITransform.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/Manager/OCRDataManager.cs","MORT/TransFormOver.cs","MORT/Model/TranslationProcessInitializationResult.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","MORT/Service/Overlay/OverlayColorAnalyzer.cs","MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/UIAdvencedOption.Designer.cs"]},{"name":"애플리케이션 시작, 단일 실행, DI 수명","intent":"WinForms 앱을 한 번만 실행하고, 새 서비스는 DI로 조립하면서도 기존 정적 매니저 호출이 계속 같은 상태를 바라보도록 연결한다.","entry":"Program.Main","implementation":["시작 시 현재 프로세스와 EnableMultipleRun.txt를 확인한다. 일반 실행은 중복 프로세스를 막지만, 업데이트 교체 과정이나 명시적인 다중 실행 허용 파일이 있으면 예외 경로를 사용한다.","ServiceCollection에 Form1, TransManager, 번역 API와 최근 서비스들을 Singleton으로 등록한다. Form1과 같은 수명으로 유지해야 하는 상태가 많기 때문에 요청 단위 Scope보다 애플리케이션 단위 수명을 사용한다.","TransManager를 DI에서 먼저 꺼내 TempInitalizeInstance를 호출한다. 이 단계가 DI 인스턴스를 기존 TransManager.Instace 호출자와 연결하는 하이브리드 호환 계층이다."],"operation":["중복 실행과 업데이트 잔여 파일을 검사한다.","서비스 등록과 ServiceProvider 생성을 수행한다.","TransManager의 정적 접근점을 DI 인스턴스에 연결한다.","DI에서 Form1을 얻어 Application.Run으로 메시지 루프를 시작한다.","예외는 최상위에서 메시지로 표시해 초기화 실패가 조용히 사라지지 않게 한다."],"state":"ServiceContainer와 Singleton 서비스는 프로세스가 끝날 때까지 유지된다. 폼 수명과 서비스 수명이 강하게 연결되어 있으므로 임의의 Transient 전환은 상태 분리를 만들 수 있다.","failures":"TempInitalizeInstance 이전에 정적 TransManager를 사용하거나 직접 new로 별도 인스턴스를 만들면 번역 캐시·취소 토큰·API 설정이 서로 달라질 수 있다.","example":"새 기능 서비스가 Form1과 같은 수명을 가져야 한다면 ConfigureServices에 AddSingleton으로 등록하고 생성자에서 주입한다. 기존 FormManager 호출을 모두 DI로 바꾸지는 않는다.","files":["MORT/Program.cs","MORT/Form1.cs","MORT/Manager/TransManager.cs"]},{"name":"OCR 영역 선택과 화면 캡처","intent":"일반 영역, 빠른 영역, 스냅샷 영역, 마우스 추적 영역을 같은 캡처 파이프라인에 공급하면서 각 영역의 화면 좌표와 예외 영역을 보존한다.","entry":"FormManager의 Make*OcrAreaForm 계열과 ProcessTranslateService의 이미지 생성 단계","implementation":["FormManager가 OCR 영역 폼 목록과 특수 영역 폼 참조를 소유한다. 영역을 생성·제거할 때 목록 인덱스와 실제 WinForms 객체 수명을 함께 갱신한다.","기본 캡처 경로는 영역별 화면 이미지를 만들고, Windows Graphics Capture 경로는 PopupScreenCapture와 ScreenCaptureProcesser가 Direct3D 프레임을 CPU 바이트 배열로 복사한다. 지정 창의 캡처 원점은 물리 픽셀인 WGC 프레임과 맞도록 DWM extended frame bounds를 사용하며, 같은 제목의 창 후보가 여럿이면 캡처 항목 크기와 가장 가까운 창을 선택한다.","ProcessTranslateService는 활성 영역 수에 맞춰 ImgData를 만들며 캡처 원점 positionX/positionY를 OCR 결과 좌표에 다시 더할 수 있도록 유지한다."],"operation":["사용자가 캡처 영역 또는 대상 창을 선택한다.","FormManager가 영역 폼을 생성하고 현재 설정을 반영한다.","캡처 직전 오버레이·테두리를 준비한다.","영역별 픽셀 데이터를 BGRA/RGB 채널 정보와 함께 만든다.","예외 영역을 제외하고 OCR 엔진에 전달한다."],"state":"OcrAreaFormList의 순서가 다중 OCR 결과 인덱스와 연결된다. quick/snap/follow-mouse 영역은 일반 목록과 별도 참조를 가진다.","failures":"폼이 Dispose된 뒤 참조만 남거나, 캡처 좌표와 OCR 좌표의 기준점이 섞이면 Overlay 문자열이 다른 위치에 그려진다. GetWindowRect는 DPI 가상화와 보이지 않는 리사이즈 경계를 포함할 수 있으므로 WGC 픽셀 원점으로 직접 사용하지 않는다.","example":"마우스 추적 전용 영역이 켜져 있으면 해당 폼만 이동시키고 번역 대상으로 사용한다. 전용 모드가 아니면 빠른 영역 또는 첫 일반 영역을 대상으로 선택한다.","files":["MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/screenForm.cs","MORT/ScreenCapture/PopupScreenCapture.xaml.cs","MORT/ScreenCapture/ScreenCaptureProcesser.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs"]},{"name":"OCR 엔진 선택과 결과 정규화","intent":"Tesseract, Windows OCR, OneOCR, Google Vision, EasyOCR처럼 입력·설치·좌표 형식이 다른 엔진을 사용자가 선택할 수 있게 하고 이후 번역 단계에는 공통 결과 모델을 제공한다.","entry":"ProcessTranslateService.DoTransAsync의 OcrType 분기","implementation":["SettingManager.OcrType 값은 기존 설정 파일에 저장되므로 순서를 유지한다. 분기는 이 값으로 엔진별 실행 경로를 선택한다.","OcrManager는 Google 자격 증명 순환과 EasyOCR Python 설치를 관리한다. WindowOcr와 OneOcr는 각 플랫폼 API와 네이티브 DLL 수명을 직접 다룬다.","엔진 결과는 OcrResult를 거쳐 OCRDataManager.ResultData에 들어간다. 여기서 줄·단어 위치, 영역 인덱스, 스냅샷 여부, 공백 제거 옵션을 공통 형태로 정리한다."],"operation":["선택 엔진의 설치·DLL·자격 증명 사용 가능 여부를 확인한다.","캡처 바이트를 엔진이 요구하는 비트맵 또는 네이티브 구조로 변환한다.","엔진을 실행해 문자열과 바운딩 박스를 얻는다.","OCRDataManager가 줄을 병합하고 읽기 순서로 정렬한다.","정규화된 문자열과 위치 목록을 번역 단계에 넘긴다."],"state":"Google OCR 사용량과 키 상태, EasyOCR Python 모듈 설치 상태, OneOCR 네이티브 pipeline, Windows OCR 언어가 각각 별도 상태를 가진다.","failures":"엔진 초기화 실패를 빈 OCR 결과와 동일하게 취급하면 사용자에게 원인이 보이지 않는다. 설치 필요·키 한도·DLL 누락을 구분해야 한다.","example":"EasyOCR이 처음 선택되면 Python과 pip, 모델을 준비한 뒤 실행한다. 준비 작업 중에는 즉시 OCR을 반복하지 않고 설치 UI와 상태를 통해 진행을 알린다.","files":["MORT/Manager/OcrManager.cs","MORT/Manager/OCRDataManager.cs","MORT/OcrApi/WindowOcr/WindowOcr.cs","MORT/OcrApi/OneOcr/OneOcr.cs","MORT/OcrApi/OneOcr/NativeMethods.cs","MORT/OcrApi/EasyOcr/EasyOcr.cs","CloudVision/Api.cs"]},{"name":"실시간·1회 OCR 번역 처리","intent":"반복 캡처를 일정한 속도로 수행하면서 같은 문장을 불필요하게 다시 번역하지 않고, 1회 번역과 실시간 번역의 종료·취소 조건을 함께 관리한다.","entry":"ProcessTranslateService의 시작 메서드와 DoTransAsync","implementation":["서비스는 별도 Thread, CancellationTokenSource, OCR 처리 속도, 현재/이전 OCR 문자열을 보유한다. UI 메시지 루프와 장시간 OCR 작업을 분리하기 위한 오래된 Thread 모델 위에 일부 async 작업이 공존한다.","캡처 후 OcrType별 결과를 만들고, 다중 영역은 영역별 ResultData로 유지한다. Overlay 스킨은 각 영역의 위치 데이터를 그대로 번역 결과에 적용하며 일반 스킨은 결합 문자열을 중심으로 처리한다.","formerOcrString과 NowOcrString을 비교해 변경이 있을 때 번역한다. db 방식과 특정 표시 모드는 같은 문자열이어도 별도 갱신 조건을 가질 수 있다.","설정 적용 경로는 UI 스레드에서 thread.Join()으로 작업 스레드가 끝나기를 기다린다. 그래서 작업 스레드는 어떤 경우에도 스스로 끝날 수 있어야 한다. 작업 스레드에서 MessageBox를 띄우면 그 스레드에 모달 루프가 생겨 영영 끝나지 않고, Join 중인 UI와 함께 앱 전체가 멈춘다. 예외 알림은 BeginInvoke로 UI 스레드에 넘기고 작업 스레드는 그대로 종료한다.","작업 스레드가 OCR과 번역 결과를 기다릴 때는 그냥 Result를 읽지 않고 짧은 간격으로 끊어 기다리며 중단 요청을 확인한다. 작업 자체를 취소하지는 못하지만, 기다리기를 멈춰야 종료 플래그를 볼 기회가 생기고 Join이 풀린다. 중단으로 기다리기를 그만두면 OperationCanceledException으로 루프를 빠져나간다.","Join에는 시간 제한이 있다. 시간 안에 끝나지 않으면 호출부는 뒷작업을 하지 않는다. 아직 살아있는 스레드와 설정·캡쳐 영역 변경이 겹치기 때문이다. 이때 종료 플래그도 되돌리지 않는다. 되돌리면 그 스레드가 정지 요청을 못 보고 계속 번역한다.","저수준 키보드 훅에서 온 정지 요청은 더 짧게 기다린다. 훅 프로시저가 300ms 넘게 붙잡히면 윈도우가 훅을 제거해 이후 모든 단축키가 죽는다.","DoTrans는 전용 스레드 위에서 끝까지 동기로 돌아야 한다. async Task로 두고 await를 넣으면 스레드가 첫 await에서 끝나 Join이 즉시 돌아오고 IdleState와 ProcessingState가 거짓을 보고한다. 그러면 정지했다고 판단한 쪽이 아직 살아있는 파이프라인과 동시에 설정을 바꾼다."],"operation":["처리 모드와 OCR 속도, 취소 토큰을 초기화한다.","활성 OCR 영역을 캡처한다.","선택 OCR 엔진으로 영역별 결과를 얻는다.","문장 병합·사전 전처리 후 이전 문장과 비교한다.","필요한 경우 TransManager.StartTrans를 호출한다.","현재 스킨의 폼을 갱신하고 다음 주기 또는 종료로 이동한다."],"state":"thread, isEndFlag, CancellationTokenSource, NowOcrString, clipboard 준비 상태가 한 실행 세션을 이룬다.","failures":"Task.Result와 Task.WaitAll을 사용하는 구간은 호출 스레드가 바뀌면 교착 또는 취소 지연 가능성이 있다. 수정 시 전체 비동기화보다 실제 호출 스레드부터 확인한다.","example":"다중 OCR 중 영역 2만 바뀌어도 최종 결합 문자열이 달라져야 번역이 갱신된다. 영역 누락으로 결합 문자열이 같아지는 회귀를 확인한다.","files":["MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","MORT/Manager/OCRDataManager.cs","MORT/Manager/TransManager.cs"]},{"name":"번역 제공자 선택, 분할, 캐시","intent":"온라인 API, 웹 자동화, 로컬 DB, EzTrans를 하나의 진입점에서 선택하되 제공자별 인증·언어 코드·취소 특성을 잃지 않는다.","entry":"TransManager.StartTrans","implementation":["TransManager는 TransType과 언어 코드 매핑을 기준으로 제공자를 선택한다. 사용자 번역 사전과 이전 결과 파일을 먼저 확인해 동일 문장 호출을 줄인다.","GetTransLinesAsync는 다중 문자열을 제공자 특성에 맞게 묶거나 나눈다. Gemini는 프롬프트와 응답 한도를 고려한 분할 경로를 사용하며 db와 EzTrans는 네트워크 API와 다른 방식으로 처리한다.","각 TransAPI 클래스는 인증, 요청 형식, 응답 파싱을 소유한다. Manager는 선택과 공통 캐시를 담당하고 제공자 세부 구현을 한 형식으로 억지로 통합하지 않는다."],"operation":["사용자 번역과 이전 결과 캐시를 조회한다.","번역 방식과 언어 코드를 결정한다.","필요하면 문장 목록을 분할하거나 제공자 요청 형식으로 조립한다.","API·WebView·IPC·DB 중 해당 구현을 호출한다.","오류 상태와 결과를 합친다.","성공 결과를 메모리와 저장 대기 목록에 추가한다."],"state":"제공자별 API 키, Naver 키 순환 상태, Gemini 모델/명령, DeepL WebView, 취소 토큰, 이전 결과 사전이 유지된다.","failures":"빈 결과, 인증 실패, 한도 초과, 취소를 같은 문자열 오류로 합치면 재시도 정책이 틀어진다. 제공자별 오류 플래그를 공통 결과로 넘길 때 의미를 보존한다.","example":"Papago Web 장애 수정은 PapagoWebTranslateAPI의 요청/파싱만 확인하는 것으로 끝나지 않는다. TransManager가 오류 결과를 캐시에 저장하지 않는지와 UI 재시도 흐름도 확인한다.","files":["MORT/Manager/TransManager.cs","MORT/TransAPI/GoogleBasicTranslateAPI.cs","MORT/TransAPI/NaverTranslateAPI.cs","MORT/TransAPI/PapagoWebTranslateAPI.cs","MORT/TransAPI/DeepLAPITranslateAPI.cs","MORT/TransAPI/DeepLTranslateAPI.cs","MORT/TransAPI/GeminiTranslatorAPI.cs","MORT/TransAPI/CustomAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"번역창 스킨과 Overlay 배치","intent":"사용 목적이 다른 dark, layer, over 세 출력 방식을 유지하면서 같은 번역 결과를 각 창의 렌더링 규칙에 맞게 표시한다.","entry":"FormManager.MakeBasicTransForm / MakeLayerTransForm / MakeOverTransForm","implementation":["FormManager는 현재 생성된 번역 폼을 추적하고 ITransform을 통해 공통 작업을 호출한다. 실제 글꼴, 배경, 투명도, TopMost 처리와 텍스트 배치는 각 폼이 담당한다.","dark/basic 창은 연속 텍스트 표시가 중심이고 layer는 투명 레이어 표현을 제공한다. over는 OCRDataManager의 줄·단어 좌표와 번역 결과를 사용해 원문 위치 위에 문장을 배치한다.","Overlay 자동 색상은 캡처 원본에서 글자·배경색 후보를 얻어 ResultData의 영역별 색상과 연결한다.","TransFormOver.UpdatePaint는 번역 스레드에서도 호출된다. 핸들이 없으면 InvokeRequired가 false라 번역 스레드가 그대로 그리게 되고, 그리는 도중 this.Handle을 읽으면 핸들이 그 스레드에 생겨 오버레이 메시지 펌프가 메시지를 돌리지 않는 스레드에 묶인다. 그래서 UI 스레드가 아닌데 핸들이 없으면 그리지 않고, 정리 중인 폼에 BeginInvoke가 실패해도 예외를 번역 스레드로 올리지 않는다.","isLockPaint 해제는 finally에 둔다. 중간 return이나 예외로 빠져나가 잠금이 남으면 이후 모든 갱신이 맨 위에서 막혀 오버레이가 멈춘 것처럼 보인다.","페인트가 만드는 Bitmap과 Graphics는 네이티브 GDI+ 자원을 들고 있어 반드시 놓아준다. 창 크기가 바뀔 때 이전 Bitmap을 버리지 않으면, OCR 영역을 끄는 동안 큰 비트맵이 매 페인트마다 새로 생겨 자원이 마르고 그리기가 실패해 레이어드 윈도우가 검게 남는다. over와 layer 두 창 모두 같은 구조라 한쪽만 고치면 다른 쪽이 그대로 느리다.","페인트 끝에서 GC.Collect를 부르지 않는다. 페인트마다 전체 블로킹 GC가 UI 스레드에서 돌면 번역 중 끊김이 된다. 이 호출은 위의 자원 누수를 덮고 있던 것이라, 누수를 먼저 막은 뒤에 걷어내야 한다.","OCR 결과가 직전과 같으면 매번 다시 그리지 않고 일정 간격으로만 그린다. 내용이 같아도 OCR 영역이나 대상 창이 움직이면 위치를 따라가야 하므로 완전히 멈출 수는 없다.","줄바꿈 길이는 이분 탐색으로 찾는다. 글자를 더할수록 길이는 줄어들 수 없어 들어가는 길이가 항상 앞쪽 구간이므로 결과가 선형 탐색과 같다. 이 함수는 폰트 이분 탐색 안에서 블록마다 수십 번 반복되어, 1부터 하나씩 재면 페인트 한 번이 통째로 느려진다. 실측으로 블록 세 개 기준 폰트 탐색이 140ms에서 47ms로 줄었다.","텍스트 측정 결과는 페인트 한 번 동안만 캐시한다. 키에 세로 여부와 StringFormat 플래그가 빠지면 다른 방향의 결과를 잘못 돌려준다. 다만 폰트 이분 탐색은 매번 다른 크기를 재므로 캐시가 맞는 경우는 많지 않다. 실측상 이득은 블록 전체 경로 기준 1.2배(측정 1036회에서 862회)로, 그리기와 사후 검증이 탐색이 이미 잰 크기를 다시 재는 부분에서만 나온다.","Font 객체 캐시는 넣지 않았다. 실측으로 new Font는 2.4us, 텍스트 측정 한 번은 35.1us라 블록당 아홉 번 만들어도 전체의 0.6%다. 캐시한 Font를 using으로 놓아주면 다음 사용에서 예외가 나므로 위험만 남는다.","폰트 크기 탐색은 원하는 크기를 먼저 시험하고, 탐색 범위가 0.25pt보다 좁아지면 멈춘다. 이분 탐색은 위 끝을 직접 시험하지 않아 원하는 크기가 그대로 들어가는 흔한 경우에도 아홉 번을 다 돈다. 탐색 한 번이 문자열 전체를 다시 재는 비용이라 반복 횟수가 페인트 시간을 좌우한다. 0.25pt보다 좁은 차이는 화면에서 구분되지 않는다.","실제 앱에서 잰 페인트 한 번은 45.9ms였고 그중 레이아웃과 드로잉이 37.4ms로 81%였다. 측정 캐시 적중은 375회 중 9회로 2.3%에 그쳤다. 폰트 이분 탐색이 매번 다른 크기를 재기 때문이며, 그래서 캐시보다 탐색 횟수를 줄이는 쪽이 효과가 크다."],"operation":["Skin 설정에 맞는 폼을 생성한다.","OCR/번역 결과와 표시 옵션을 전달한다.","폼이 텍스트 크기·정렬·색상·배경을 계산한다.","Overlay는 바운딩 박스와 캡처 원점을 화면 좌표로 변환한다.","번역 중 투명도와 TopMost 임시 상태를 복원한다."],"state":"각 폼 인스턴스, 표시 여부, TopMost 임시 해제, 자동 글꼴 범위, Overlay 색상과 위치가 상태로 유지된다.","failures":"세 스킨을 같은 문자열 렌더러로 간주하면 Overlay 위치 정보가 손실된다. 폼이 닫힌 직후 비동기 결과가 도착하는 경우 IsDisposed 확인이 필요하다.","example":"Overlay 위치 버그는 rectangle의 X/Y뿐 아니라 캡처 positionX/positionY, 다중 영역 인덱스, MeasureString 결과를 함께 비교한다.","files":["MORT/Interface/ITransform.cs","MORT/Manager/FormManager.cs","MORT/TransForm.cs","MORT/TransFormLayer.cs","MORT/TransFormOver.cs","MORT/Manager/OCRDataManager.cs","MORT/ColorThief/ColorThief.cs"]},{"name":"설정 저장, 복원, 고급 옵션","intent":"오랜 기간 배포된 텍스트 설정 파일을 계속 읽으면서 새 옵션을 추가하고 UI 상태와 실행 서비스를 초기화한다.","entry":"SettingManager와 AdvencedOptionManager 초기화","implementation":["SettingManager는 번역 방식, OCR 방식, 스킨, 언어, 키와 경로 같은 핵심 설정을 읽고 쓴다. enum 순서와 앞 소문자 이름은 기존 저장값과 연결된 계약이다.","AdvencedOptionManager는 @KEY 프리픽스 기반 항목을 다루며 고급 표시·OCR·단축키 옵션을 정적 설정 데이터로 제공한다.","UIAdvencedOption과 FormOption은 설정 객체를 화면 컨트롤에 반영하고 사용자 변경을 다시 매니저에 전달한다. Designer 파일은 컨트롤 선언과 이벤트 연결을 담당한다."],"operation":["설정 파일 존재 여부와 버전을 확인한다.","키별 값을 파싱하고 누락 값에는 호환 기본값을 적용한다.","폼 컨트롤과 서비스 초기화에 값을 전달한다.","사용자 변경 시 기존 키 형식을 유지해 저장한다.","다음 실행에서 동일 값이 복원되는지 확인한다."],"state":"설정은 정적 필드, SettingData 객체, UI 컨트롤에 중복 표현될 수 있어 변경 시 어느 쪽이 원본인지 주변 흐름을 확인해야 한다.","failures":"enum 재정렬, 키 이름 변경, @KEY 공백 변경은 컴파일 오류 없이 기존 설정을 다른 의미로 읽게 만들 수 있다.","example":"새 bool 옵션은 기존 키를 수정하지 않고 새 @KEY 항목과 기본값을 추가한다. 파일에 키가 없는 구버전 사용자는 기존 동작을 유지해야 한다.","files":["MORT/SettingManager.cs","MORT/AdvencedOptionManager.cs","MORT/UIAdvencedOption.cs","MORT/FormOption.cs","MORT/SettingData/BaseSettingData.cs","MORT/SettingData/GeminiPreset.cs","MORT/SettingData/SerializableFont.cs"]},{"name":"사용자 입력, 단축키, 클립보드 보조","intent":"번역 창을 조작하지 않아도 전역 단축키와 클립보드 변화를 통해 OCR·번역 기능을 빠르게 실행한다.","entry":"GlobalKeyboardHook, Form1Button, ClipboardMonitor","implementation":["GlobalKeyboardHook가 Windows 전역 키 이벤트를 받고 설정된 조합과 비교한다. CtHotKey와 CtSettingHotKey는 키 조합 편집 UI와 저장 연결을 제공한다.","Form1Button과 Form1이 기능별 명령을 실제 서비스·폼 호출로 연결한다. 단축키 정의와 실행 코드가 분리되어 있어 새 동작은 두 경로를 모두 확인해야 한다.","ClipboardMonitor는 클립보드 변경을 감지하고 FormClipboardAssist 또는 ProcessTranslateService의 클립보드 번역 경로로 전달한다."],"operation":["사용자가 단축키 또는 클립보드 감시를 활성화한다.","Windows 메시지나 키 훅에서 이벤트를 받는다.","현재 설정과 중복 실행 상태를 확인한다.","OCR 시작·스냅샷·마우스 추적·번역창 제어 명령을 호출한다.","작업이 끝나면 훅과 클립보드 준비 상태를 복구한다."],"state":"등록된 키 조합, 키 입력 잠금, 클립보드 자기 기록 방지 플래그, 번역 처리 중 여부가 중복 실행을 막는다.","failures":"프로그램이 쓴 번역 결과를 다시 클립보드 입력으로 인식하면 무한 번역 루프가 생길 수 있다.","example":"마우스 따라가기 단축키는 서비스 Toggle을 호출해야 하며 폼을 직접 생성하면 전용 영역 모드와 타이머 상태가 어긋난다.","files":["MORT/KeyHook/GlobalKeyboardHook.cs","MORT/CustomControl/CtHotKey.cs","MORT/CustomControl/CtSettingHotKey.cs","MORT/Form1Button.cs","MORT/ClipboardAssist/ClipboardMonitor.cs","MORT/FormClipboardAssist.cs"]},{"name":"번역 방식 목록과 사용자 Custom API","intent":"고정 번역 방식과 사용자가 만든 Custom API 프리셋을 하나의 선택 목록에 표시하면서 프리셋별 URL·언어·요청 형식을 유지한다.","entry":"TranslateTypListService.Initialize","implementation":["TranslateTypListService는 기본 TransType 항목을 표시 모델로 만들고 CustomApiPresetService에서 읽은 프리셋을 뒤에 결합한다.","CustomApiPresetService는 프리셋 파일의 생성·조회·수정·삭제와 현재 선택을 담당한다. CustomAPI는 선택된 프리셋의 URL과 언어 코드를 실제 HTTP 요청으로 변환한다.","TranslateTypeModel의 TransType과 SubKey 조합이 같은 customApi enum 아래 여러 사용자 프리셋을 구분한다."],"operation":["기본 번역 방식 목록을 만든다.","저장된 Custom API 프리셋을 읽는다.","표시 제목과 TransType/SubKey 모델을 선택 UI에 제공한다.","선택 시 TransManager가 프리셋으로 CustomAPI를 초기화한다.","응답 파싱 결과를 공통 번역 결과로 반환한다."],"state":"프리셋 이름, SubKey, URL, source/target 코드, 요청과 응답 규칙이 사용자 데이터다.","failures":"표시 인덱스를 TransType 정수값으로 직접 간주하면 Custom API 항목이 추가된 뒤 잘못된 번역기를 선택한다.","example":"콤보박스 선택값은 GetModel(index)로 해석하고 TransType과 SubKey를 함께 저장한다.","files":["MORT/Service/TranslateTyp/TranslateTypListService.cs","MORT/Service/CustomApi/CustomApiPresetService.cs","MORT/Model/TranslateType/TranslateTypeModel.cs","MORT/Model/CustomApi/CustomApiModel.cs","MORT/TransAPI/CustomAPI.cs"]},{"name":"로컬라이즈와 언어별 UI","intent":"하나의 키로 여러 언어 UI 문구를 조회하고, 각 폼이 컨트롤 텍스트를 현재 앱 언어에 맞게 갱신한다.","entry":"LocalizeManager.Init과 ILocalizeForm.SetLocalize","implementation":["LocalizeManager는 CSV 문자열을 LocalizeData 목록으로 읽고 AppLanguage에 맞는 열을 선택한다. Auto는 시스템 환경을 앱 지원 언어로 변환한다.","폼은 ILocalizeForm 또는 개별 초기화 코드에서 키로 문구를 조회한다. 키가 없을 때 기본 텍스트를 사용할 수 있어 새 키 반영 전에도 화면이 완전히 비지 않는다.","Resources/localize.csv는 외부 Google Spreadsheet가 원본이므로 코드 작업에서 직접 수정하지 않는다."],"operation":["앱 언어 설정을 결정한다.","CSV 데이터를 언어별 레코드로 파싱한다.","폼 생성 또는 언어 변경 때 키를 조회한다.","컨트롤 Text와 안내 문구를 갱신한다.","줄바꿈 치환 옵션이 있으면 표시 형식에 맞게 변환한다."],"state":"현재 AppLanguage와 정적 LocalizeData 목록이 프로세스 전체에서 공유된다.","failures":"코드에서 키를 바꾸고 CSV 원본을 동기화하지 않으면 기본 문구만 표시된다. 이 저장소에서 CSV를 직접 고치는 방식으로 해결하지 않는다.","example":"새 오류 메시지가 필요하면 기존 키 재사용 가능성을 먼저 확인하고, 새 키가 필요하면 스프레드시트 반영 사항을 별도 작업으로 기록한다.","files":["MORT/LocalizeManager/LocalizeManager.cs","MORT/LocalizeManager/ILocalizeForm.cs","MORT/FormLocalize.cs","MORT/Resources/localize.csv"]},{"name":"마우스 따라가기 OCR","intent":"사용자가 고정 영역을 다시 배치하지 않아도 마우스 주변을 일정 간격으로 OCR하며, 전용 영역 모드와 기존 영역 이동 모드를 모두 유지한다.","entry":"MouseFollowOcrAreaService.Toggle","implementation":["서비스는 WinForms Timer로 마우스 위치를 주기적으로 읽고 대상 OcrAreaForm의 위치를 갱신한다. 너무 잦은 캡처 갱신을 막기 위해 마지막 갱신 시간을 보관한다.","새 전용 영역 옵션이 켜지면 ocrAreaFollowMouseForm을 생성해 그 영역만 번역한다. 레거시 모드에서는 quickOcrAreaForm 또는 첫 일반 OCR 영역을 재사용한다.","폼 생성·파괴는 FormManager를 통해 수행해 목록과 화면 객체의 소유권을 한곳에 유지한다."],"operation":["Toggle로 활성 상태를 바꾼다.","필요하면 전용 OCR 영역 폼을 만든다.","Timer Tick마다 현재 마우스 좌표와 대상 폼을 확인한다.","폼 크기를 유지하며 위치를 마우스 주변으로 이동한다.","비활성화·Dispose 시 타이머를 멈추고 전용 폼을 정리한다."],"state":"_isEnabled, _lastCaptureUpdateTime, _mainForm, Timer와 FormManager의 전용 폼 참조가 함께 움직인다.","failures":"Dispose된 폼을 이동하거나 서비스 상태를 거치지 않고 폼만 닫으면 타이머가 남을 수 있다.","example":"단축키 처리에서는 MouseFollowOcrAreaService.Toggle을 호출하고, UI 체크 상태는 서비스 IsEnabled를 기준으로 맞춘다.","files":["MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","MORT/Manager/FormManager.cs","MORT/OcrAreaForm.cs","MORT/Form1Button.cs"]},{"name":"업데이트, 버전 확인, EzTrans IPC","intent":"메인 앱이 자기 파일을 직접 교체하지 않고 별도 Updater와 IPC 프로세스를 사용해 잠긴 실행 파일과 네이티브 번역기 경계를 넘는다.","entry":"VersionCheckLogic, Updater.Program, PipeServer","implementation":["VersionCheckLogic은 배포 버전을 확인하고 업데이트가 필요할 때 별도 Updater 실행 흐름을 시작한다. Updater 프로젝트는 메인 프로세스 종료를 기다린 뒤 파일을 다운로드·교체한다.","MORT_2.exe와 관련 설정 파일 검사는 업데이트 중간 산출물을 정리하고 다음 실행으로 넘기기 위한 시작 경로와 연결된다.","EzTrans는 네이티브 DLL 직접 호출 경로와 PipeServer/PipeClient IPC 경로가 공존한다. 프로세스 비트수와 DLL 로딩 조건 때문에 일반 HTTP 번역기처럼 취급할 수 없다."],"operation":["원격 버전과 현재 버전을 비교한다.","업데이트 동의와 실행 조건을 확인한다.","Updater를 실행하고 메인 앱 종료를 기다린다.","파일을 다운로드·검증·교체한다.","필요하면 새 실행 파일로 재시작한다.","EzTrans 요청은 파이프를 통해 클라이언트 프로세스에 전달하고 응답을 반환한다."],"state":"현재/원격 버전, 다운로드 진행률, 교체 대상 경로, 파이프 연결, EzTrans DLL 로드 상태가 별도 프로세스에 걸쳐 유지된다.","failures":"업데이트 폴더에 오래된 산출물이 섞이거나 네이티브 DLL 아키텍처가 맞지 않으면 C# 빌드는 성공해도 실행이 실패한다.","example":"업데이트 관련 수정은 Updater 단독 성공뿐 아니라 MORT가 종료 대기와 임시 파일 정리를 올바르게 수행하는지 확인한다.","files":["MORT/VersionCheck/VersionCheckLogic.cs","Updater/Program.cs","Updater/Updater.cs","MORT/PipeServer/PipeServer.cs","PipeClient/Program.cs","PipeClient/PipeClient.cs","PipeClient/PipeEzTransAPI.cs","MORT/TransAPI/EzTransAPI.cs"]},{"name":"이미지 인식 결과 디버깅 스냅샷","intent":"오버레이가 왜 그렇게 그려졌는지 나중에 다시 확인하기 위해, 화면을 보지 않고도 판단할 수 있는 값만 골라 JSON 한 벌로 남긴다. 로그 문자열은 사람이 읽는 용도라 값을 비교하기 어렵고 렌더 결과는 화면에만 남기 때문에, 인식 단계와 렌더 단계의 최종값을 같은 파일에 묶는다.","entry":"OcrDebugSnapshotService.CaptureOcrResult 와 TransFormOver.AddText","implementation":["디버깅 탭의 \u0027이미지 인식 결과 저장\u0027 체크는 Form1.IsDebugSaveAnalysisResult 정적 플래그만 바꾼다. 기존 디버깅 체크들과 같이 설정 파일에 저장하지 않고 실행 중에만 유지한다.","OCR과 번역이 끝나 새 결과가 확정된 시점에 ProcessTranslateService가 ResultData 전체를 record로 복사한다. 이후 오버레이가 TransData.ViewRect와 ContentRect를 덮어쓰기 때문에, 인식 단계 값은 이때 복사해두어야 렌더 결과와 섞이지 않는다.","오버레이 스킨이면 저장을 미루고 대기 상태로 둔다. AddText가 블록을 실제로 그린 뒤 최종값을 채우면 그때 파일로 쓴다. 오버레이가 아닌 스킨은 대기 없이 즉시 저장한다.","그리는 색은 ResolveDrawColors로 분리해 DrawStringWithOutline2와 스냅샷이 같은 계산을 쓴다. 스냅샷이 별도 계산을 복제하면 실제 화면과 어긋난 값을 기록하게 된다.","OCR 영역 rect는 화면 좌표, 오버레이 블록 rect는 오버레이 폼 클라이언트 좌표다. 두 좌표계를 잇도록 FormRect에 폼의 화면 위치를 함께 남긴다.","저장 파일은 UserData/Debug/OcrAnalysis 아래 실행 시각 이름으로 계속 쌓인다. 문제가 된 특정 캡처를 되돌아봐야 하므로 한 파일을 덮어쓰지 않는다.","오버레이 정보에는 페인트 구간별 시간(전체·창 크기 계산·레이아웃과 드로잉·화면 반영)과 텍스트 측정 캐시 적중 횟수가 함께 들어간다. UI 스레드를 얼마나 잡고 있는지 화면을 보지 않고 판단하기 위한 값이며, 디버깅 저장이 켜진 동안에만 잰다. 스냅샷 전달은 화면 반영까지 끝난 뒤 DoUpdatePaint 마지막에 한다. AddText 안에서 넘기면 화면 반영 시간을 담을 수 없다."],"operation":["디버깅 탭에서 기능을 활성화하고 체크를 켠다.","OCR·번역이 끝나면 인식 결과를 record로 복사해 대기시킨다.","오버레이가 블록을 그리며 폰트 크기, 색, 줄바꿈, 잘림 여부를 채운다.","JSON 파일을 UserData/Debug/OcrAnalysis에 쓴다.","오버레이가 그려지지 않은 채 다음 인식이 오면 이전 스냅샷을 오버레이 정보 없이 저장한다."],"state":"_pending 스냅샷과 _waitingOverlay 플래그를 lock으로 보호한다. 인식은 번역 쓰레드, 렌더는 UI 쓰레드에서 끝나기 때문에 한쪽만 보고 저장 시점을 정할 수 없다.","failures":"OCR 문장이 직전과 같으면 갱신 자체를 건너뛰므로 스냅샷도 남지 않는다. 오버레이가 비활성이거나 GDI가 준비되지 않아 AddText가 일찍 빠져나가면 그 회차 오버레이 값은 비고, 다음 인식 때 오버레이 없는 스냅샷으로 저장된다. 켜둔 동안 파일이 계속 쌓이므로 정리는 사용자 몫이다.","example":"오버레이 글자가 잘려 보이면 해당 시각 JSON에서 Clipped, FontSize, MinimumFontSize, ContentRect를 함께 본다. 자동 크기 계산 문제인지 블록 충돌 해소로 영역이 좁아진 문제인지 SourceRect와 ViewRect 차이로 구분한다.","files":["MORT/Model/Debug/OcrDebugSnapshotModel.cs","MORT/Service/Debug/OcrDebugSnapshotService.cs","MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","MORT/TransFormOver.cs","MORT/Form1.cs","MORT/Form1Button.cs","MORT/Form1.Designer.cs","MORT/Program.cs"]}],"scan":{"latestSourceWriteUtc":"2026-08-04T10:21:48Z","sourceFileCount":145,"typeCount":246,"methodCount":1446,"markerCount":57,"coverage":{"eligibleSourceFiles":145,"reflectedSourceFiles":145,"codeReflectionRate":100,"manuallyDocumentedFiles":35,"manualExplanationRate":24.1,"automaticallyDocumentedFiles":110,"excludedDirectories":["bin","obj",".git","packages"]},"directories":[{"name":"CloudVision","files":2},{"name":"GSTrans","files":1},{"name":"MORT","files":136},{"name":"PipeClient","files":3},{"name":"Updater","files":3}],"registrations":[{"lifetime":"Singleton","service":"Form1"},{"lifetime":"Singleton","service":"GeminiConfigMaker"},{"lifetime":"Singleton","service":"TransManager"},{"lifetime":"Singleton","service":"GeminiTranslatorAPI"},{"lifetime":"Singleton","service":"CustomAPI"},{"lifetime":"Singleton","service":"TranslateTypListService"},{"lifetime":"Singleton","service":"CustomApiPresetService"},{"lifetime":"Singleton","service":"MouseFollowOcrAreaService"},{"lifetime":"Singleton","service":"Service.Debug.OcrDebugSnapshotService"},{"lifetime":"Singleton","service":"ProcessTranslateService"}],"largestFiles":[{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]}],"types":[{"kind":"class","name":"Api","path":"CloudVision/Api.cs","line":13},{"kind":"class","name":"Test","path":"GSTrans/Sheets.cs","line":15},{"kind":"class","name":"Sheets","path":"GSTrans/Sheets.cs","line":20},{"kind":"class","name":"About","path":"MORT/About.cs","line":8},{"kind":"class","name":"About","path":"MORT/About.Designer.cs","line":3},{"kind":"class","name":"HotKeyData","path":"MORT/AdvencedOptionManager.cs","line":12},{"kind":"class","name":"AdvencedOptionManager","path":"MORT/AdvencedOptionManager.cs","line":86},{"kind":"class","name":"Data","path":"MORT/AdvencedOptionManager.cs","line":162},{"kind":"class","name":"AlphaColorDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":9},{"kind":"class","name":"SimpleWindow","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":92},{"kind":"class","name":"AlphaDialog","path":"MORT/AlphaDialog/AlphaColorDialog.cs","line":337},{"kind":"class","name":"AlphaColorPanel","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":8},{"kind":"class","name":"TrackBar2","path":"MORT/AlphaDialog/AlphaColorPanel.cs","line":174},{"kind":"class","name":"BorderlessResizeForwarder","path":"MORT/BorderlessResizeForwarder.cs","line":7},{"kind":"interface","name":"IClipboard","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":7},{"kind":"class","name":"ClipboardMonitor","path":"MORT/ClipboardAssist/ClipboardMonitor.cs","line":11},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.cs","line":9},{"kind":"class","name":"BinaryColorPickerForm","path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.cs","line":10},{"kind":"class","name":"ScreenCaptureClass","path":"MORT/Color Picker/ColorPickerForm.cs","line":12},{"kind":"class","name":"Gdi32","path":"MORT/Color Picker/ColorPickerForm.cs","line":41},{"kind":"class","name":"User32","path":"MORT/Color Picker/ColorPickerForm.cs","line":71},{"kind":"class","name":"ColorPickerForm","path":"MORT/Color Picker/ColorPickerForm.Designer.cs","line":3},{"kind":"class","name":"ColorGroup","path":"MORT/ColorGroup.cs","line":3},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.cs","line":8},{"kind":"class","name":"ColorGroupForm","path":"MORT/ColorGroupForm.Designer.cs","line":3},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.cs","line":5},{"kind":"class","name":"ColorInformation","path":"MORT/ColorInformation.Designer.cs","line":3},{"kind":"class","name":"CMap","path":"MORT/ColorThief/CMap.cs","line":7},{"kind":"class","name":"ColorExtensions","path":"MORT/ColorThief/ColorExtensions.cs","line":6},{"kind":"record","name":"QuantizedColor","path":"MORT/ColorThief/ColorThief.cs","line":12},{"kind":"class","name":"ColorThief","path":"MORT/ColorThief/ColorThief.cs","line":20},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/ColorThief/ColorThief.cs","line":214},{"kind":"class","name":"Mmcq","path":"MORT/ColorThief/Mmcq.cs","line":8},{"kind":"class","name":"Simd","path":"MORT/ColorThief/Simd.cs","line":9},{"kind":"class","name":"VBox","path":"MORT/ColorThief/VBox.cs","line":6},{"kind":"class","name":"VBoxComparer","path":"MORT/ColorThief/VBoxComparer.cs","line":6},{"kind":"class","name":"VBoxCountComparer","path":"MORT/ColorThief/VBoxCountComparer.cs","line":6},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.cs","line":7},{"kind":"class","name":"CtHotKey","path":"MORT/CustomControl/CtHotKey.Designer.cs","line":4},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.cs","line":7},{"kind":"class","name":"CtSettingHotKey","path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","line":4},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.cs","line":10},{"kind":"class","name":"CustomLabel","path":"MORT/CustomLabel.Designer.cs","line":3},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.cs","line":8},{"kind":"class","name":"DicEditorForm","path":"MORT/DicEditor/DicEditorForm.Designer.cs","line":3},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.cs","line":6},{"kind":"class","name":"DonatePage","path":"MORT/DonatePage.Designer.cs","line":3},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","line":11},{"kind":"class","name":"EasyOcrInstaller","path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","line":3},{"kind":"enum","name":"CurrentStateType","path":"MORT/Form1.cs","line":30},{"kind":"class","name":"Form1","path":"MORT/Form1.cs","line":39},{"kind":"class","name":"ImgData","path":"MORT/Form1.cs","line":44},{"kind":"class","name":"Form1","path":"MORT/Form1.Designer.cs","line":4},{"kind":"class","name":"Form1","path":"MORT/Form1Button.cs","line":9},{"kind":"class","name":"Form1","path":"MORT/FormClipboardAssist.cs","line":8},{"kind":"class","name":"Form1","path":"MORT/FormLocalize.cs","line":10},{"kind":"class","name":"ComponenetLoclize","path":"MORT/FormLocalize.cs","line":328},{"kind":"class","name":"Form1","path":"MORT/FormOption.cs","line":17},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","line":7},{"kind":"class","name":"UIGoogleOcrSetting","path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","line":3},{"kind":"interface","name":"IMainFormContract","path":"MORT/IMainFormContract.cs","line":3},{"kind":"enum","name":"TranslateStatusType","path":"MORT/Interface/ITransform.cs","line":6},{"kind":"interface","name":"ITransform","path":"MORT/Interface/ITransform.cs","line":12},{"kind":"class","name":"GlobalKeyboardHook","path":"MORT/KeyHook/GlobalKeyboardHook.cs","line":15},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.cs","line":7},{"kind":"enum","name":"KeyType","path":"MORT/KeyInputLabel.cs","line":9},{"kind":"class","name":"KeyInputLabel","path":"MORT/KeyInputLabel.Designer.cs","line":3},{"kind":"interface","name":"ILocalizeForm","path":"MORT/LocalizeManager/ILocalizeForm.cs","line":3},{"kind":"enum","name":"AppLanguage","path":"MORT/LocalizeManager/LocalizeManager.cs","line":10},{"kind":"class","name":"LocalizeData","path":"MORT/LocalizeManager/LocalizeManager.cs","line":14},{"kind":"interface","name":"ILocalize","path":"MORT/LocalizeManager/LocalizeManager.cs","line":43},{"kind":"class","name":"LocalizeManager","path":"MORT/LocalizeManager/LocalizeManager.cs","line":48},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.cs","line":7},{"kind":"class","name":"Logger","path":"MORT/Logger/LoggerForm.cs","line":101},{"kind":"class","name":"LogEventArgs","path":"MORT/Logger/LoggerForm.cs","line":116},{"kind":"class","name":"CountChangedEventArgs","path":"MORT/Logger/LoggerForm.cs","line":121},{"kind":"class","name":"LoggerForm","path":"MORT/Logger/LoggerForm.Designer.cs","line":3},{"kind":"class","name":"Logo","path":"MORT/Logo.cs","line":7},{"kind":"class","name":"Logo","path":"MORT/Logo.Designer.cs","line":3},{"kind":"class","name":"FormManager","path":"MORT/Manager/FormManager.cs","line":13},{"kind":"enum","name":"TransFormState","path":"MORT/Manager/FormManager.cs","line":82},{"kind":"class","name":"OCRDataManager","path":"MORT/Manager/OCRDataManager.cs","line":198},{"kind":"enum","name":"WordAngleType","path":"MORT/Manager/OCRDataManager.cs","line":202},{"kind":"class","name":"TransData","path":"MORT/Manager/OCRDataManager.cs","line":210},{"kind":"class","name":"LineData","path":"MORT/Manager/OCRDataManager.cs","line":249},{"kind":"class","name":"ResultData","path":"MORT/Manager/OCRDataManager.cs","line":286},{"kind":"class","name":"OcrManager","path":"MORT/Manager/OcrManager.cs","line":18},{"kind":"enum","name":"OcrMethodType","path":"MORT/Manager/OcrManager.cs","line":20},{"kind":"class","name":"GoogleOcrInfo","path":"MORT/Manager/OcrManager.cs","line":69},{"kind":"class","name":"GoogleOcrSetting","path":"MORT/Manager/OcrManager.cs","line":76},{"kind":"class","name":"TransManager","path":"MORT/Manager/TransManager.cs","line":14},{"kind":"class","name":"TransCodeData","path":"MORT/Manager/TransManager.cs","line":16},{"kind":"class","name":"TransData","path":"MORT/Manager/TransManager.cs","line":51},{"kind":"class","name":"NaverKeyData","path":"MORT/Manager/TransManager.cs","line":67},{"kind":"enum","name":"eState","path":"MORT/Manager/TransManager.cs","line":70},{"kind":"class","name":"BackupOcrAreaModel","path":"MORT/Model/BackupOcrAreaModel.cs","line":7},{"kind":"record","name":"CustomApiModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":11},{"kind":"class","name":"CustomApiPresetListModel","path":"MORT/Model/CustomApi/CustomApiModel.cs","line":14},{"kind":"record","name":"OcrDebugRect","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":10},{"kind":"record","name":"OcrDebugWord","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":32},{"kind":"record","name":"OcrDebugLine","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":38},{"kind":"record","name":"OcrDebugTransBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":53},{"kind":"record","name":"OcrDebugAutoColor","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":65},{"kind":"record","name":"OcrDebugArea","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":75},{"kind":"record","name":"OcrDebugOverlayBlock","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":94},{"kind":"record","name":"OcrDebugPaintTiming","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":137},{"kind":"record","name":"OcrDebugOverlayInfo","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":152},{"kind":"record","name":"OcrDebugSnapshotModel","path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","line":168},{"kind":"class","name":"EasyOcrResultModel","path":"MORT/Model/OCR/EasyOcrResultModel.cs","line":9},{"kind":"class","name":"TranslateMemoryModel","path":"MORT/Model/TranslateMemoryModel.cs","line":5},{"kind":"record","name":"TranslateTypeModel","path":"MORT/Model/TranslateType/TranslateTypeModel.cs","line":4},{"kind":"record","name":"TranslationProcessInitializationResult","path":"MORT/Model/TranslationProcessInitializationResult.cs","line":3},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","line":5},{"kind":"class","name":"NaverKeyEditor","path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","line":3},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","line":7},{"kind":"class","name":"NaverKeyListUI","path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","line":3},{"kind":"class","name":"EasyOcr","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":16},{"kind":"class","name":"NativeMethods","path":"MORT/OcrApi/OneOcr/NativeMethods.cs","line":30},{"kind":"class","name":"OneOcr","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":14},{"kind":"class","name":"Word","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":639},{"kind":"class","name":"Line","path":"MORT/OcrApi/OneOcr/OneOcr.cs","line":653},{"kind":"interface","name":"IMemoryBufferByteAccess","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":19},{"kind":"enum","name":"ProcessType","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":27},{"kind":"class","name":"WindowOcr","path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","line":31},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.cs","line":9},{"kind":"enum","name":"dragMode","path":"MORT/OcrAreaForm.cs","line":14},{"kind":"class","name":"OcrAreaForm","path":"MORT/OcrAreaForm.Designer.cs","line":3},{"kind":"class","name":"PipeServer","path":"MORT/PipeServer/PipeServer.cs","line":11},{"kind":"class","name":"StreamString","path":"MORT/PipeServer/PipeServer.cs","line":206},{"kind":"class","name":"Program","path":"MORT/Program.cs","line":16},{"kind":"class","name":"Resources","path":"MORT/Properties/Resources.Designer.cs","line":25},{"kind":"class","name":"Settings","path":"MORT/Properties/Settings.Designer.cs","line":16},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.cs","line":8},{"kind":"enum","name":"StepType","path":"MORT/QuickSetting/UIQuickSetting.cs","line":12},{"kind":"class","name":"UIQuickSetting","path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","line":4},{"kind":"class","name":"RTT","path":"MORT/Rtt.cs","line":10},{"kind":"class","name":"RTT","path":"MORT/Rtt.Designer.cs","line":3},{"kind":"class","name":"CompositionHelper","path":"MORT/ScreenCapture/CompositionHelper.cs","line":31},{"kind":"interface","name":"ICompositorInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":37},{"kind":"interface","name":"ICompositorDesktopInterop","path":"MORT/ScreenCapture/CompositionHelper.cs","line":53},{"kind":"class","name":"CoreMessagingHelper","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":31},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_APARTMENTTYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":33},{"kind":"enum","name":"DISPATCHERQUEUE_THREAD_TYPE","path":"MORT/ScreenCapture/CoreMessagingHelper.cs","line":39},{"kind":"interface","name":"IDirect3DDxgiInterfaceAccess","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":38},{"kind":"class","name":"Direct3D11Helper","path":"MORT/ScreenCapture/Direct3D11Helper.cs","line":42},{"kind":"class","name":"PopupScreenCapture","path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","line":35},{"kind":"class","name":"ScreenCapture","path":"MORT/ScreenCapture/ScreenCapture.cs","line":8},{"kind":"enum","name":"BorderStateType","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":45},{"kind":"class","name":"ScreenCaptureProcesser","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":52},{"kind":"interface","name":"IBorderRequired","path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","line":57},{"kind":"class","name":"WindowEnumerationHelper","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":29},{"kind":"enum","name":"GetAncestorFlags","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":31},{"kind":"enum","name":"GWL","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":40},{"kind":"enum","name":"WindowStyles","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":53},{"kind":"enum","name":"DWMWINDOWATTRIBUTE","path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","line":78},{"kind":"class","name":"screenForm","path":"MORT/screenForm.cs","line":8},{"kind":"enum","name":"ScreenType","path":"MORT/screenForm.cs","line":14},{"kind":"class","name":"screenForm","path":"MORT/screenForm.Designer.cs","line":3},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.cs","line":9},{"kind":"class","name":"SearchOptionForm","path":"MORT/SearchOptionForm.Designer.cs","line":3},{"kind":"class","name":"CustomApiPresetService","path":"MORT/Service/CustomApi/CustomApiPresetService.cs","line":12},{"kind":"class","name":"OcrDebugSnapshotService","path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","line":15},{"kind":"class","name":"GeminiConfigMaker","path":"MORT/Service/Gemini/GeminiConfigMaker.cs","line":10},{"kind":"record","name":"GeminiConfigModel","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":9},{"kind":"enum","name":"GeminiVersionType","path":"MORT/Service/Gemini/GeminiConfigModel.cs","line":10},{"kind":"class","name":"MouseFollowOcrAreaService","path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","line":7},{"kind":"class","name":"OverlayColorAnalyzer","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":15},{"kind":"class","name":"ForegroundCluster","path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","line":574},{"kind":"class","name":"OverlayRenderSynchronizationService","path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","line":5},{"kind":"class","name":"ProcessTranslateService","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":22},{"kind":"class","name":"TranslateResultMemoryService","path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","line":10},{"kind":"class","name":"TranslationImageModelService","path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","line":10},{"kind":"class","name":"TranslationProcessInitializationService","path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","line":11},{"kind":"class","name":"PythonModouleService","path":"MORT/Service/PythonService/PythonModouleService.cs","line":14},{"kind":"class","name":"TranslateTypListService","path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","line":9},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":9},{"kind":"class","name":"ListData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":13},{"kind":"class","name":"SettingData","path":"MORT/SettingBrowser/SettingBrowserUI.cs","line":55},{"kind":"class","name":"SettingBrowserUI","path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","line":3},{"kind":"interface","name":"ISettingDataParse","path":"MORT/SettingData/BaseSettingData.cs","line":10},{"kind":"interface","name":"ISettingData","path":"MORT/SettingData/BaseSettingData.cs","line":16},{"kind":"class","name":"SettingDataFactory","path":"MORT/SettingData/BaseSettingData.cs","line":21},{"kind":"class","name":"BaseSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":76},{"kind":"class","name":"JsonSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":99},{"kind":"class","name":"BoolSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":154},{"kind":"class","name":"IntSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":180},{"kind":"class","name":"StringSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":204},{"kind":"class","name":"TranslationFileSettingData","path":"MORT/SettingData/BaseSettingData.cs","line":228},{"kind":"class","name":"HotKeySettingData","path":"MORT/SettingData/BaseSettingData.cs","line":283},{"kind":"class","name":"GeminiPresetValue","path":"MORT/SettingData/GeminiPreset.cs","line":8},{"kind":"class","name":"SerializableFont","path":"MORT/SettingData/SerializableFont.cs","line":8},{"kind":"enum","name":"OcrLanguageType","path":"MORT/SettingManager.cs","line":10},{"kind":"class","name":"QuickSettingData","path":"MORT/SettingManager.cs","line":20},{"kind":"enum","name":"FontColorType","path":"MORT/SettingManager.cs","line":23},{"kind":"class","name":"HSVData","path":"MORT/SettingManager.cs","line":29},{"kind":"class","name":"SettingManager","path":"MORT/SettingManager.cs","line":97},{"kind":"enum","name":"Skin","path":"MORT/SettingManager.cs","line":100},{"kind":"enum","name":"TransType","path":"MORT/SettingManager.cs","line":106},{"kind":"enum","name":"OcrType","path":"MORT/SettingManager.cs","line":120},{"kind":"enum","name":"SortType","path":"MORT/SettingManager.cs","line":130},{"kind":"enum","name":"DeepLAPIEndpointType","path":"MORT/SettingManager.cs","line":136},{"kind":"class","name":"Settings","path":"MORT/Settings.cs","line":10},{"kind":"class","name":"TabControl","path":"MORT/TabControl.cs","line":12},{"kind":"class","name":"TabPageChangeEventArgs","path":"MORT/TabControl.cs","line":258},{"kind":"class","name":"CustomAPI","path":"MORT/TransAPI/CustomAPI.cs","line":13},{"kind":"class","name":"DeepLAPITranslateAPI","path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","line":11},{"kind":"interface","name":"IDeeplAPIContract","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":8},{"kind":"class","name":"DeepLTranslateAPI","path":"MORT/TransAPI/DeepLTranslateAPI.cs","line":12},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.cs","line":13},{"kind":"class","name":"DeeplWebView","path":"MORT/TransAPI/DeeplWebView.Designer.cs","line":3},{"kind":"class","name":"EzTransAPI","path":"MORT/TransAPI/EzTransAPI.cs","line":8},{"kind":"enum","name":"GeminiErrorType","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":12},{"kind":"class","name":"GeminiTranslatorAPI","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":18},{"kind":"interface","name":"IGoogleBasicTranslateAPIContract","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":8},{"kind":"class","name":"GoogleBasicTranslateAPI","path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","line":12},{"kind":"class","name":"NaverTranslateAPI","path":"MORT/TransAPI/NaverTranslateAPI.cs","line":9},{"kind":"class","name":"PapagoWebTranslateAPI","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":10},{"kind":"class","name":"TestPA","path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","line":20},{"kind":"class","name":"TransForm","path":"MORT/TransForm.cs","line":10},{"kind":"class","name":"TransForm","path":"MORT/TransForm.Designer.cs","line":3},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.cs","line":15},{"kind":"enum","name":"dragMode","path":"MORT/TransFormLayer.cs","line":541},{"kind":"class","name":"TransFormLayer","path":"MORT/TransFormLayer.Designer.cs","line":3},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.cs","line":18},{"kind":"class","name":"OverlayDataCache","path":"MORT/TransFormOver.cs","line":198},{"kind":"class","name":"OverlayRenderBlock","path":"MORT/TransFormOver.cs","line":520},{"kind":"enum","name":"dragMode","path":"MORT/TransFormOver.cs","line":2028},{"kind":"class","name":"TransFormOver","path":"MORT/TransFormOver.Designer.cs","line":3},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.cs","line":16},{"kind":"class","name":"UIAdvencedOption","path":"MORT/UIAdvencedOption.Designer.cs","line":4},{"kind":"class","name":"ComboboxItem","path":"MORT/Util.cs","line":11},{"kind":"enum","name":"FileStepType","path":"MORT/Util.cs","line":23},{"kind":"enum","name":"UpdateType","path":"MORT/Util.cs","line":31},{"kind":"class","name":"GlobalDefine","path":"MORT/Util.cs","line":36},{"kind":"enum","name":"TesseractLanguageType","path":"MORT/Util.cs","line":39},{"kind":"class","name":"Util","path":"MORT/Util.cs","line":94},{"kind":"class","name":"VersionCheckLogic","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":13},{"kind":"class","name":"PipeClient","path":"PipeClient/PipeClient.cs","line":12},{"kind":"enum","name":"StatusType","path":"PipeClient/PipeClient.cs","line":14},{"kind":"class","name":"PipeEzTransAPI","path":"PipeClient/PipeEzTransAPI.cs","line":12},{"kind":"class","name":"Program","path":"PipeClient/Program.cs","line":14},{"kind":"class","name":"StreamString","path":"PipeClient/Program.cs","line":96},{"kind":"class","name":"Program","path":"Updater/Program.cs","line":3},{"kind":"class","name":"Updater","path":"Updater/Updater.cs","line":14},{"kind":"class","name":"Updater","path":"Updater/Updater.Designer.cs","line":4}],"markers":[{"tag":"TODO","path":"CloudVision/Api.cs","line":17,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":597,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":624,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/AdvencedOptionManager.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":19,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":30,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":104,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/ColorThief/ColorThief.cs","line":139,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Form1.cs","line":72,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":312,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":782,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":795,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":922,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1521,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1840,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1848,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":1937,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":1951,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2082,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2223,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":2236,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Form1.cs","line":2701,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3077,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Form1.cs","line":3450,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormLocalize.cs","line":26,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/FormOption.cs","line":882,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/FormManager.cs","line":58,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Manager/FormManager.cs","line":1186,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":293,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/OCRDataManager.cs","line":861,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":59,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":106,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Manager/TransManager.cs","line":875,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","line":170,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Program.cs","line":213,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":346,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":357,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":363,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":369,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":375,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":381,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":387,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"todo","path":"MORT/Rtt.cs","line":393,"text":"todo 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":53,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":81,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":457,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"Question","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":632,"text":"Question 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":723,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","line":810,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingData/GeminiPreset.cs","line":6,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":9,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/SettingManager.cs","line":921,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TabControl.cs","line":24,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/TransAPI/GeminiTranslatorAPI.cs","line":140,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/Util.cs","line":478,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":248,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."},{"tag":"TODO","path":"MORT/VersionCheck/VersionCheckLogic.cs","line":543,"text":"TODO 주석 내용은 개인정보 유입 방지를 위해 위키에 포함하지 않는다."}],"files":[{"path":"CloudVision/Api.cs","lines":231,"updatedUtc":"2026-06-17T15:53:37Z","category":"Google OCR 래퍼","intent":"Api 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["Api"],"methods":[{"access":"public","name":"Test","line":20,"signature":"public void Test()"},{"access":"public","name":"InitClient","line":47,"signature":"public void InitClient(string path)"},{"access":"private","name":"ToRect","line":67,"signature":"private void ToRect(RepeatedField\u003cVertex\u003e vertices , out double x, out double y, out double sizeX, out double sizeY)"},{"access":"public","name":"GetText","line":131,"signature":"public GoogleOcrResult GetText(byte[] stream)"}],"dependencies":["Google.Cloud.Vision.V1","Google.Apis.Auth.OAuth2","Google.Protobuf.Collections","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"CloudVision/GoogleOcrResult.cs","lines":23,"updatedUtc":"2023-07-10T15:57:38Z","category":"Google OCR 래퍼","intent":"GoogleOcrResult 타입으로 Google Cloud Vision 요청과 응답 모델을 메인 앱에서 쓰기 쉬운 OCR 결과로 변환한다.","operation":"자격 증명으로 Vision 클라이언트를 준비하고 이미지 요청을 보낸 뒤 텍스트와 좌표 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":[],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"GSTrans/Sheets.cs","lines":416,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google Sheets 번역","intent":"Test, Sheets 타입으로 Google Sheets 기반 사용자 번역 데이터의 인증, 조회와 토큰 관리를 제공한다.","operation":"OAuth 토큰을 준비해 시트 범위를 읽고 원문-번역 매핑을 메인 앱에 반환한다.","generated":false,"documentationSource":"automatic","types":["Test","Sheets"],"methods":[{"access":"public","name":"Initialize","line":67,"signature":"public void Initialize()"},{"access":"public","name":"AuthorizeAsync","line":212,"signature":"public async Task AuthorizeAsync()"},{"access":"public","name":"InitToken","line":268,"signature":"public void InitToken()"},{"access":"public","name":"Init","line":279,"signature":"public bool Init(string sheetsID, string clientID, string secretKey)"},{"access":"public","name":"DeleteToken","line":317,"signature":"public void DeleteToken()"},{"access":"public","name":"Translate","line":332,"signature":"public string Translate(string src, ref bool isError)"}],"dependencies":["Google.Apis.Auth.OAuth2","Google.Apis.Sheets.v4","Google.Apis.Sheets.v4.Data","Google.Apis.Services","Google.Apis.Util.Store","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/About.cs","lines":88,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"About 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 pictureBox1_Click, label2_Click, linkLabel1_LinkClicked, linkLabel3_LinkClicked, pictureBox1_Click_1 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["About"],"methods":[{"access":"private","name":"pictureBox1_Click","line":41,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"label2_Click","line":48,"signature":"private void label2_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":53,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":60,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox1_Click_1","line":67,"signature":"private void pictureBox1_Click_1(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/About.Designer.cs","lines":193,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"About 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["About"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/AdvencedOptionManager.cs","lines":781,"updatedUtc":"2026-08-02T08:48:46Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["HotKeyData","AdvencedOptionManager","Data"],"methods":[{"access":"public","name":"GetResultAutoFontSize","line":416,"signature":"public static float GetResultAutoFontSize(float fontSize)"},{"access":"public","name":"SetOverLay","line":451,"signature":"public static void SetOverLay(bool isAutoSize, int minSize, int maxSize, int snapShotRemainTime, bool autoMerge, bool keepSourceDirection, bool autoColor, bool autoFontColor, bool autoBackgroundColor)"},{"access":"public","name":"SetOverlayFontOutline","line":464,"signature":"public static void SetOverlayFontOutline(bool useFontOutline)"},{"access":"public","name":"SetLayer","line":469,"signature":"public static void SetLayer(bool isAlignmentBottom, bool alignmentRight)"},{"access":"public","name":"SetTranslationFormSetting","line":475,"signature":"public static void SetTranslationFormSetting(bool useTopMostOptionWhenTranslate, bool igonoreEmptyTranslate, string fontData, bool enableAdvencedHideTransform)"},{"access":"public","name":"SetTranslateMemory","line":483,"signature":"public static void SetTranslateMemory(bool enable, int limit, int time)"},{"access":"public","name":"SetExecutive","line":495,"signature":"public static void SetExecutive(bool isUse)"},{"access":"public","name":"SetDeeplOption","line":499,"signature":"public static void SetDeeplOption(bool useAltOption)"},{"access":"public","name":"SetCustomApiOption","line":504,"signature":"public static void SetCustomApiOption(bool useGoogleLanguageCode, string source, string target, string url)"},{"access":"public","name":"SetGeminiOption","line":512,"signature":"public static void SetGeminiOption(string command, string model, bool disableDefaultCommand)"},{"access":"public","name":"SetGeminiPreset","line":519,"signature":"public static void SetGeminiPreset(GeminiPresetValue preset)"},{"access":"public","name":"SetDicReProcessCount","line":527,"signature":"public static void SetDicReProcessCount(int count)"},{"access":"public","name":"SetClipboardTrans","line":549,"signature":"public static void SetClipboardTrans(bool isUse, bool isShowOriginal, bool isShowProcessing)"},{"access":"public","name":"SetClipboardSave","line":557,"signature":"public static void SetClipboardSave(int saveType)"},{"access":"public","name":"SetHotKey","line":562,"signature":"public static void SetHotKey(List\u003cHotKeyData\u003e list)"},{"access":"public","name":"GetHotKeyList","line":569,"signature":"public static List\u003cHotKeyData\u003e GetHotKeyList()"},{"access":"public","name":"GetHotKeyResult","line":574,"signature":"public static HotKeyData GetHotKeyResult(List\u003cKeys\u003e inputList)"},{"access":"public","name":"Init","line":592,"signature":"public static void Init()"},{"access":"private","name":"LoadTranslationFileList","line":653,"signature":"private static void LoadTranslationFileList()"},{"access":"private","name":"LoadTranslatorSetting","line":660,"signature":"private static void LoadTranslatorSetting()"},{"access":"private","name":"LoadDicSetting","line":681,"signature":"private static void LoadDicSetting()"},{"access":"private","name":"LoadTranslationFormSetting","line":686,"signature":"private static void LoadTranslationFormSetting()"},{"access":"private","name":"LoadAppSetting","line":714,"signature":"private static void LoadAppSetting()"},{"access":"private","name":"LoadClipboardSetting","line":728,"signature":"private static void LoadClipboardSetting()"},{"access":"private","name":"LoadClipboardSaveSetting","line":735,"signature":"private static void LoadClipboardSaveSetting()"},{"access":"private","name":"LoadOcrSetting","line":740,"signature":"private static void LoadOcrSetting()"},{"access":"public","name":"Reset","line":746,"signature":"public static void Reset()"},{"access":"public","name":"Save","line":766,"signature":"public static void Save()"}],"dependencies":["MORT.SettingData","System","System.Collections.Generic","System.IO","System.Windows.Forms","System.Drawing","System.Globalization","MORT.Service.CustomApi"]},{"path":"MORT/AlphaDialog/AlphaColorDialog.cs","lines":432,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 인터페이스","intent":"AlphaColorDialog, SimpleWindow, AlphaDialog 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetColor, GetWindowText, ConvertToBitmap, ToString, FindSelectedColor, GetColorInternal, AreEqual, SetColorInternal 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["AlphaColorDialog","SimpleWindow","AlphaDialog"],"methods":[{"access":"public","name":"SetColor","line":37,"signature":"public void SetColor(Color color)"},{"access":"private","name":"GetWindowText","line":86,"signature":"private static String GetWindowText(IntPtr hWnd)"},{"access":"private","name":"ConvertToBitmap","line":96,"signature":"private static Bitmap ConvertToBitmap(IntPtr hWnd)"},{"access":"public","name":"ToString","line":121,"signature":"public override String ToString()"},{"access":"private","name":"FindSelectedColor","line":126,"signature":"private static Color? FindSelectedColor(IntPtr hWnd)"},{"access":"private","name":"GetColorInternal","line":188,"signature":"private Color GetColorInternal()"},{"access":"private","name":"AreEqual","line":210,"signature":"private static bool AreEqual(Color c1, Color c2)"},{"access":"private","name":"SetColorInternal","line":215,"signature":"private void SetColorInternal(Color c)"},{"access":"protected","name":"HookProc","line":240,"signature":"protected override IntPtr HookProc(IntPtr hWnd, int msg, IntPtr wparam, IntPtr lparam)"},{"access":"protected","name":"Dispose","line":323,"signature":"protected override void Dispose(bool disposing)"},{"access":"protected","name":"OnFormClosing","line":345,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"SetWindowPos","line":369,"signature":"private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"private","name":"GetWindowRect","line":372,"signature":"private static extern bool GetWindowRect(IntPtr hWnd, ref RECT lpRect)"},{"access":"private","name":"GetParent","line":375,"signature":"private static extern IntPtr GetParent(IntPtr hWnd)"},{"access":"private","name":"SendMessage","line":378,"signature":"private static extern int SendMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"PostMessage","line":381,"signature":"private static extern int PostMessage(IntPtr hWnd, int Msg, int wParam, int lParam)"},{"access":"private","name":"GetDlgItem","line":384,"signature":"private static extern IntPtr GetDlgItem(IntPtr hDlg, int nIDDlgItem)"},{"access":"private","name":"ScreenToClient","line":387,"signature":"private static extern bool ScreenToClient(IntPtr hWnd, ref POINT lpPoint)"},{"access":"private","name":"SetParent","line":390,"signature":"private static extern IntPtr SetParent(IntPtr hWndChild, IntPtr hWndNewParent)"},{"access":"private","name":"SetForegroundWindow","line":393,"signature":"private static extern bool SetForegroundWindow(IntPtr hWnd)"},{"access":"private","name":"GetWindowText","line":396,"signature":"private static extern int GetWindowText(IntPtr hWnd, StringBuilder lpString, int nMaxCount)"},{"access":"private","name":"BitBlt","line":399,"signature":"private static extern bool BitBlt(IntPtr pHdc, int iX, int iY, int iWidth, int iHeight, IntPtr pHdcSource, int iXSource, int iYSource, System.Int32 dw)"}],"dependencies":["System","System.Drawing","System.Windows.Forms","System.Runtime.InteropServices","System.Text","System.ComponentModel"]},{"path":"MORT/AlphaDialog/AlphaColorPanel.cs","lines":211,"updatedUtc":"2025-03-16T06:03:29Z","category":"색상 입력 UI","intent":"알파 채널을 포함한 색상을 미리 보고 선택할 수 있는 사용자 정의 패널을 제공한다.","operation":"현재 ARGB 값을 배경과 표시 요소에 반영하고 사용자 입력이 바뀌면 상위 AlphaColorDialog가 읽을 색상 상태를 갱신한다.","generated":false,"documentationSource":"manual","types":["AlphaColorPanel","TrackBar2"],"methods":[{"access":"public","name":"SetAlpha","line":50,"signature":"public void SetAlpha(int alpha)"},{"access":"private","name":"HandleKeyEvent","line":63,"signature":"private void HandleKeyEvent(Control sender, KeyEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":89,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"protected","name":"OnPaint","line":137,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"public","name":"GetPreferredSize","line":183,"signature":"public override Size GetPreferredSize(Size proposedSize)"},{"access":"private","name":"SendMessage","line":200,"signature":"private static extern void SendMessage(IntPtr hwnd, uint msg, IntPtr wp, ref RECT lp)"},{"access":"private","name":"GetThumbRect","line":203,"signature":"private static RECT GetThumbRect(TrackBar trackBar)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/BorderlessResizeForwarder.cs","lines":42,"updatedUtc":"2026-05-19T13:44:18Z","category":"창 상호 운용","intent":"테두리 없는 창에서도 사용자가 가장자리를 끌어 기본 Windows 창처럼 크기를 바꿀 수 있게 한다.","operation":"마우스 위치를 창의 가장자리·모서리 hit-test 값으로 변환하고 네이티브 창 메시지로 전달해 운영체제의 resize 동작을 시작한다.","generated":false,"documentationSource":"manual","types":["BorderlessResizeForwarder"],"methods":[{"access":"protected","name":"WndProc","line":22,"signature":"protected override void WndProc(ref Message m)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/ClipboardAssist/ClipboardMonitor.cs","lines":64,"updatedUtc":"2023-07-13T10:38:58Z","category":"클립보드 감시","intent":"Windows 클립보드 변경 알림을 구독해 새 텍스트를 번역 보조 흐름으로 전달한다.","operation":"메시지 전용 창을 클립보드 리스너로 등록하고 WM_CLIPBOARDUPDATE 수신 시 텍스트를 읽어 콜백을 호출하며 Dispose 때 등록을 해제한다.","generated":false,"documentationSource":"manual","types":["IClipboard","ClipboardMonitor"],"methods":[{"access":"public","name":"SetActive","line":22,"signature":"public void SetActive(bool isActive)"},{"access":"private","name":"ClipboardChanged","line":51,"signature":"private void ClipboardChanged(Object sender, ClipboardChangedEventArgs e)"}],"dependencies":["System","WK.Libraries.SharpClipboardNS"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.cs","lines":268,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"BinaryColorPickerForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, Setup, SetValue, ProcessBinary, TextBox_KeyPress, RGBTextLeave, HSVTextLeave, button1_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"public","name":"LocalizeForm","line":19,"signature":"public void LocalizeForm()"},{"access":"public","name":"Setup","line":27,"signature":"public void Setup(PictureBox original, PictureBox binary)"},{"access":"public","name":"SetValue","line":33,"signature":"public void SetValue(bool isHsv, bool isRgb, bool isThreshold, ColorGroup color, int threshold)"},{"access":"private","name":"ProcessBinary","line":73,"signature":"private void ProcessBinary()"},{"access":"private","name":"TextBox_KeyPress","line":145,"signature":"private void TextBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"RGBTextLeave","line":152,"signature":"private void RGBTextLeave(object sender, EventArgs e)"},{"access":"private","name":"HSVTextLeave","line":172,"signature":"private void HSVTextLeave(object sender, EventArgs e)"},{"access":"private","name":"button1_Click","line":194,"signature":"private void button1_Click(object sender, EventArgs e)"},{"access":"private","name":"BinaryColorPickerForm_FormClosed","line":201,"signature":"private void BinaryColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"modeComboBox_SelectedIndexChanged_1","line":210,"signature":"private void modeComboBox_SelectedIndexChanged_1(object sender, EventArgs e)"},{"access":"private","name":"revokeButton_Click","line":231,"signature":"private void revokeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"trackBar1_ValueChanged","line":242,"signature":"private void trackBar1_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox2_TextChanged","line":250,"signature":"private void textBox2_TextChanged(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Drawing","System.Drawing.Imaging","System.Windows.Forms"]},{"path":"MORT/Color Picker/BinaryColorPickerForm.Designer.cs","lines":365,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"BinaryColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["BinaryColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Color Picker/ColorPickerForm.cs","lines":444,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"ColorPickerForm, ScreenCaptureClass, Gdi32, User32 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 CaptureWindow, CreateCompatibleDC, SelectObject, DeleteDC, DeleteObject, GetWindowRect, ReleaseDC, GetWindowDC 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorPickerForm","ScreenCaptureClass","Gdi32","User32"],"methods":[{"access":"public","name":"CaptureWindow","line":19,"signature":"public Image CaptureWindow(IntPtr handle)"},{"access":"public","name":"CreateCompatibleDC","line":51,"signature":"public static extern IntPtr CreateCompatibleDC(IntPtr hDc)"},{"access":"public","name":"SelectObject","line":58,"signature":"public static extern IntPtr SelectObject(IntPtr hDc, IntPtr hObject)"},{"access":"public","name":"DeleteDC","line":61,"signature":"public static extern bool DeleteDC(IntPtr hDc)"},{"access":"public","name":"DeleteObject","line":64,"signature":"public static extern bool DeleteObject(IntPtr hObject)"},{"access":"public","name":"GetWindowRect","line":82,"signature":"public static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"public","name":"ReleaseDC","line":85,"signature":"public static extern IntPtr ReleaseDC(IntPtr hWnd, IntPtr hDc)"},{"access":"public","name":"GetWindowDC","line":88,"signature":"public static extern IntPtr GetWindowDC(IntPtr hWnd)"},{"access":"private","name":"GetForegroundWindow","line":94,"signature":"private static extern IntPtr GetForegroundWindow()"},{"access":"private","name":"GetWindowRect","line":97,"signature":"private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect)"},{"access":"private","name":"LocalizeString","line":159,"signature":"private string LocalizeString(string key)"},{"access":"public","name":"LocalizeForm","line":164,"signature":"public void LocalizeForm()"},{"access":"private","name":"MouseWheelEvent","line":170,"signature":"private void MouseWheelEvent(object sender, System.Windows.Forms.MouseEventArgs e)"},{"access":"private","name":"Init","line":207,"signature":"private void Init()"},{"access":"private","name":"ApplyZoom","line":230,"signature":"private void ApplyZoom()"},{"access":"public","name":"PrintWindow","line":242,"signature":"public static extern bool PrintWindow(IntPtr hwnd, IntPtr hdcBlt, uint nFlags)"},{"access":"public","name":"CaptureWindow","line":243,"signature":"public Bitmap CaptureWindow(Control ctl)"},{"access":"public","name":"GetForegroundWindowIntPtr","line":256,"signature":"public static IntPtr GetForegroundWindowIntPtr()"},{"access":"public","name":"ScreenCapture","line":275,"signature":"public void ScreenCapture(Bitmap bitmap)"},{"access":"public","name":"ShowBinary","line":313,"signature":"public void ShowBinary(bool isRgb = false, bool isHsv = false, bool isThreshold = false, ColorGroup color = null, int threshold = 127)"},{"access":"private","name":"ColorPickerForm_FormClosed","line":330,"signature":"private void ColorPickerForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ConvertBlackAndWhite","line":339,"signature":"public static Bitmap ConvertBlackAndWhite(Bitmap original)"},{"access":"public","name":"ColorToHSV","line":369,"signature":"public static void ColorToHSV(Color color, out double hue, out double saturation, out double value)"},{"access":"private","name":"screenPictureBox_MouseMove","line":379,"signature":"private void screenPictureBox_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"ColorPickerForm_Resize","line":421,"signature":"private void ColorPickerForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_TextUpdate","line":427,"signature":"private void zoomComboBox_TextUpdate(object sender, EventArgs e)"},{"access":"private","name":"zoomComboBox_SelectedValueChanged","line":432,"signature":"private void zoomComboBox_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"processButton_Click","line":438,"signature":"private void processButton_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Imaging","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Color Picker/ColorPickerForm.Designer.cs","lines":309,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorPickerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorPickerForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorGroup.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"OCR 색상 조건","intent":"OCR 캡처에서 포함하거나 제외할 색상과 허용 범위를 하나의 그룹으로 표현한다.","operation":"기준 RGB/HSV 값과 threshold를 보관하고 캡처 픽셀이 조건 안에 드는지 판정하는 데이터로 사용된다.","generated":false,"documentationSource":"manual","types":["ColorGroup"],"methods":[{"access":"public","name":"SetHSV","line":18,"signature":"public void SetHSV(QuickSettingData.HSVData data)"},{"access":"public","name":"checkHSVRange","line":27,"signature":"public void checkHSVRange()"},{"access":"public","name":"setRGBValuse","line":45,"signature":"public void setRGBValuse(int newR, int newG, int newB)"},{"access":"public","name":"setHSVValuse","line":53,"signature":"public void setHSVValuse(int newS1, int newS2, int newV1, int newV2)"},{"access":"public","name":"getValueR","line":60,"signature":"public int getValueR()"},{"access":"public","name":"getValueG","line":64,"signature":"public int getValueG()"},{"access":"public","name":"getValueB","line":68,"signature":"public int getValueB()"},{"access":"public","name":"getValueV1","line":72,"signature":"public int getValueV1()"},{"access":"public","name":"getValueV2","line":78,"signature":"public int getValueV2()"},{"access":"public","name":"getValueS1","line":84,"signature":"public int getValueS1()"},{"access":"public","name":"getValueS2","line":90,"signature":"public int getValueS2()"}],"dependencies":[]},{"path":"MORT/ColorGroupForm.cs","lines":126,"updatedUtc":"2024-02-28T14:32:58Z","category":"사용자 인터페이스","intent":"ColorGroupForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 LocalizeForm, ColorGroupForm_Load, panel1_Paint, ShowGroupForm, UpdateList, Accept, acceptButton_Click, button2_Click 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"public","name":"LocalizeForm","line":17,"signature":"public void LocalizeForm()"},{"access":"private","name":"ColorGroupForm_Load","line":26,"signature":"private void ColorGroupForm_Load(object sender, EventArgs e)"},{"access":"private","name":"panel1_Paint","line":32,"signature":"private void panel1_Paint(object sender, PaintEventArgs e)"},{"access":"public","name":"ShowGroupForm","line":37,"signature":"public void ShowGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"UpdateList","line":44,"signature":"public void UpdateList(screenForm.ScreenType screenType)"},{"access":"private","name":"Accept","line":77,"signature":"private void Accept()"},{"access":"private","name":"acceptButton_Click","line":107,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"button2_Click","line":112,"signature":"private void button2_Click(object sender, EventArgs e)"},{"access":"private","name":"button3_Click","line":117,"signature":"private void button3_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/ColorGroupForm.Designer.cs","lines":117,"updatedUtc":"2024-02-28T14:32:58Z","category":"WinForms UI 선언","intent":"ColorGroupForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorGroupForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorInformation.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"색상 정보 UI","intent":"선택된 OCR 색상의 수치와 미리보기를 사용자에게 보여주는 보조 폼이다.","operation":"ColorGroup 또는 선택 결과를 받아 RGB/HSV·임계값 컨트롤에 표시하고 편집 결과를 호출자에게 돌려준다.","generated":false,"documentationSource":"manual","types":["ColorInformation"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/ColorInformation.Designer.cs","lines":38,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"ColorInformation 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["ColorInformation"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ColorThief/CMap.cs","lines":25,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"CMap 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["CMap"],"methods":[{"access":"public","name":"Push","line":11,"signature":"public void Push(VBox box)"},{"access":"public","name":"GeneratePalette","line":17,"signature":"public IEnumerable\u003cQuantizedColor\u003e GeneratePalette()"}],"dependencies":["System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/ColorThief/ColorExtensions.cs","lines":60,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"ColorExtensions 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["ColorExtensions"],"methods":[{"access":"public","name":"ToHsl","line":12,"signature":"public static HslColor ToHsl(this Color color)"},{"access":"public","name":"ToHexString","line":44,"signature":"public static string ToHexString(this Color color)"},{"access":"public","name":"ToHexAlphaString","line":47,"signature":"public static string ToHexAlphaString(this Color color)"},{"access":"public","name":"HslColor","line":59,"signature":"public readonly record struct HslColor(double A, double H, double S, double L)"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/ColorThief/ColorThief.cs","lines":220,"updatedUtc":"2026-08-02T08:48:46Z","category":"색상 분석","intent":"QuantizedColor, ColorThief, IMemoryBufferByteAccess 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["QuantizedColor","ColorThief","IMemoryBufferByteAccess"],"methods":[{"access":"public","name":"QuantizedColor","line":12,"signature":"public record QuantizedColor(Color Color, int Population)"},{"access":"private","name":"CalculateYiqLuma","line":15,"signature":"private static int CalculateYiqLuma(Color color) =\u003e Convert.ToInt32(Math.Round((299 * color.R + 587 * color.G + 114 * color.B) / 1000f))"},{"access":"public","name":"GetPalette","line":27,"signature":"public static IEnumerable\u003cQuantizedColor\u003e GetPalette(in byte[] sourceImage, int channels, int originalX, int originalY, Rectangle rect, int colorCount = DefaultColorCount, int quality = DefaultQuality, bool ignoreWhit..."}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows","Windows.Graphics.Imaging","WinRT"]},{"path":"MORT/ColorThief/Mmcq.cs","lines":409,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Mmcq 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Mmcq"],"methods":[{"access":"public","name":"GetColorIndex","line":19,"signature":"public static int GetColorIndex(int r, int g, int b) =\u003e (r \u003c\u003c (2 * Sigbits)) + (g \u003c\u003c Sigbits)"},{"access":"private","name":"GetHisto","line":27,"signature":"private static int[] GetHisto(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b)"},{"access":"private","name":"VboxFromPixels","line":43,"signature":"private static VBox VboxFromPixels(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, int[] histo)"},{"access":"private","name":"DoCut","line":52,"signature":"private static (VBox vbox1, VBox vbox2) DoCut(char color, VBox vbox, ReadOnlySpan\u003cint\u003e partialsum, ReadOnlySpan\u003cint\u003e lookaheadsum, int total)"},{"access":"private","name":"MedianCutApply","line":122,"signature":"private static (VBox vbox1, VBox? vbox2) MedianCutApply(IList\u003cint\u003e histo, VBox vbox)"},{"access":"private","name":"Iter","line":226,"signature":"private static void Iter(List\u003cVBox\u003e lh, IComparer\u003cVBox\u003e comparator, int target, IList\u003cint\u003e histo)"},{"access":"private","name":"GetHisto","line":264,"signature":"private static int[] GetHisto(IEnumerable\u003cbyte[]\u003e pixels)"},{"access":"private","name":"VboxFromPixels","line":279,"signature":"private static VBox VboxFromPixels(IList\u003cbyte[]\u003e pixels, int[] histo)"},{"access":"public","name":"Quantize","line":325,"signature":"public static CMap Quantize(byte[][] pixels, int maxcolors)"},{"access":"public","name":"Quantize","line":367,"signature":"public static CMap Quantize(Span\u003cbyte\u003e r, Span\u003cbyte\u003e g, Span\u003cbyte\u003e b, int maxcolors)"}],"dependencies":["System","System.Buffers","System.Collections.Generic","System.Linq"]},{"path":"MORT/ColorThief/Simd.cs","lines":243,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"Simd 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["Simd"],"methods":[{"access":"public","name":"Rshift","line":14,"signature":"public static void Rshift(Span\u003cbyte\u003e source, int shift)"},{"access":"public","name":"MinMax","line":51,"signature":"public static (byte min, byte mas) MinMax(ReadOnlySpan\u003cbyte\u003e source)"},{"access":"public","name":"GetColorIndexies","line":145,"signature":"public static void GetColorIndexies(ReadOnlySpan\u003cbyte\u003e r, ReadOnlySpan\u003cbyte\u003e g, ReadOnlySpan\u003cbyte\u003e b, Span\u003cshort\u003e indexis)"}],"dependencies":["System","System.Numerics","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Runtime.Intrinsics"]},{"path":"MORT/ColorThief/VBox.cs","lines":119,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBox 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBox"],"methods":[{"access":"public","name":"Volume","line":30,"signature":"public int Volume(bool force)"},{"access":"public","name":"Count","line":40,"signature":"public int Count(bool force)"},{"access":"public","name":"Clone","line":67,"signature":"public VBox Clone()"},{"access":"public","name":"Avg","line":72,"signature":"public int[] Avg(bool force)"},{"access":"private","name":"ClampAbsByte","line":117,"signature":"private static int ClampAbsByte(int i) =\u003e Math.Clamp(Math.Abs(i), byte.MinValue, byte.MaxValue)"}],"dependencies":["System","System.Runtime.CompilerServices"]},{"path":"MORT/ColorThief/VBoxComparer.cs","lines":23,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/ColorThief/VBoxCountComparer.cs","lines":17,"updatedUtc":"2025-12-01T14:55:49Z","category":"색상 분석","intent":"VBoxCountComparer 타입으로 이미지 색상을 양자화해 Overlay 글자와 배경에 사용할 대표 색상 후보를 계산한다.","operation":"픽셀을 색상 공간의 박스로 나누고 빈도 기준으로 병합·정렬해 팔레트를 반환한다.","generated":false,"documentationSource":"automatic","types":["VBoxCountComparer"],"methods":[{"access":"public","name":"Compare","line":8,"signature":"public int Compare(VBox? x, VBox? y)"}],"dependencies":["System","System.Collections.Generic"]},{"path":"MORT/CustomControl/CtHotKey.cs","lines":52,"updatedUtc":"2023-07-13T10:38:58Z","category":"단축키 UI","intent":"전역 기능 단축키 한 개의 키 조합과 사용 여부를 편집하는 재사용 WinForms 컨트롤이다.","operation":"키 입력을 사람이 읽을 수 있는 표시값으로 바꾸고 중복·금지 키를 확인한 뒤 설정 저장에 사용할 키 코드와 보조키 상태를 노출한다.","generated":false,"documentationSource":"manual","types":["CtHotKey"],"methods":[{"access":"public","name":"Init","line":14,"signature":"public void Init(string title, string info, string clear, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":23,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":29,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":34,"signature":"public void SetKeys(List\u003cKeys\u003e list)"},{"access":"public","name":"GetKeys","line":39,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":45,"signature":"private void btClear_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtHotKey.Designer.cs","lines":103,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomControl/CtSettingHotKey.cs","lines":88,"updatedUtc":"2023-12-24T07:26:17Z","category":"단축키 UI","intent":"설정 화면에서 여러 단축키 항목을 동일한 규칙으로 편집하고 검증할 수 있게 한다.","operation":"CtHotKey와 설정 모델을 연결해 현재 조합을 표시하고 사용자 변경 이벤트를 AdvencedOptionManager 저장 값으로 전달한다.","generated":false,"documentationSource":"manual","types":["CtSettingHotKey"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string title, string file, string clearKey, string fileSelect, int index, KeyInputLabel.KeyType keyType)"},{"access":"public","name":"SetEmpty","line":35,"signature":"public void SetEmpty()"},{"access":"public","name":"Apply","line":41,"signature":"public string Apply()"},{"access":"public","name":"SetKeys","line":46,"signature":"public void SetKeys(List\u003cKeys\u003e list, string filePath)"},{"access":"public","name":"GetKeys","line":52,"signature":"public List\u003cKeys\u003e GetKeys()"},{"access":"private","name":"btClear_Click","line":58,"signature":"private void btClear_Click(object sender, EventArgs e)"},{"access":"private","name":"btSelect_Click","line":64,"signature":"private void btSelect_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/CustomControl/CtSettingHotKey.Designer.cs","lines":131,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CtSettingHotKey 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CtSettingHotKey"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/CustomLabel.cs","lines":98,"updatedUtc":"2025-03-16T06:03:29Z","category":"사용자 정의 렌더링","intent":"기본 Label로 표현하기 어려운 번역 미리보기의 글꼴, 배경, 테두리와 정렬을 직접 그린다.","operation":"Paint 단계에서 현재 표시 옵션으로 텍스트 영역을 계산하고 배경·테두리·문자 순서로 렌더링한다.","generated":false,"documentationSource":"manual","types":["CustomLabel"],"methods":[{"access":"protected","name":"OnPaint","line":38,"signature":"protected override void OnPaint(PaintEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Windows.Forms"]},{"path":"MORT/CustomLabel.Designer.cs","lines":36,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"CustomLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["CustomLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DicEditor/DicEditorForm.cs","lines":132,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"DicEditorForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, SetSpellCheckFunction, SetOriginalText, cancelButton_Click, aceeoptButton_Click, DicEditorForm_FormClosing 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"private","name":"myDelegate","line":13,"signature":"private delegate void myDelegate(string newText)"},{"access":"public","name":"SetSpellCheckFunction","line":17,"signature":"public void SetSpellCheckFunction(Form1.PDelegateSetSpellCheck newFunction)"},{"access":"private","name":"SetOriginalText","line":23,"signature":"private void SetOriginalText(string newText)"},{"access":"private","name":"cancelButton_Click","line":48,"signature":"private void cancelButton_Click(object sender, EventArgs e)"},{"access":"private","name":"aceeoptButton_Click","line":53,"signature":"private void aceeoptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DicEditorForm_FormClosing","line":118,"signature":"private void DicEditorForm_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/DicEditor/DicEditorForm.Designer.cs","lines":120,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"DicEditorForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DicEditorForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/DonatePage.cs","lines":88,"updatedUtc":"2026-03-02T02:03:50Z","category":"사용자 인터페이스","intent":"DonatePage 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 DonatePage_FormClosing, pictureBox1_Click, linkLabel1_LinkClicked, OpenDonatePage, OpenKofi, linkLabel2_LinkClicked, pictureBox2_Click, OpenKakaoPay 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"private","name":"DonatePage_FormClosing","line":12,"signature":"private void DonatePage_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"pictureBox1_Click","line":20,"signature":"private void pictureBox1_Click(object sender, EventArgs e)"},{"access":"private","name":"linkLabel1_LinkClicked","line":25,"signature":"private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"OpenDonatePage","line":30,"signature":"private void OpenDonatePage()"},{"access":"private","name":"OpenKofi","line":35,"signature":"private void OpenKofi()"},{"access":"private","name":"linkLabel2_LinkClicked","line":40,"signature":"private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":45,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"OpenKakaoPay","line":50,"signature":"private void OpenKakaoPay()"},{"access":"private","name":"DonatePage_Load","line":59,"signature":"private void DonatePage_Load(object sender, EventArgs e)"},{"access":"private","name":"linkLabel3_LinkClicked","line":68,"signature":"private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"linkLabel4_LinkClicked","line":77,"signature":"private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"pictureBox4_Click","line":82,"signature":"private void pictureBox4_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Windows.Forms"]},{"path":"MORT/DonatePage.Designer.cs","lines":376,"updatedUtc":"2026-03-21T07:08:20Z","category":"WinForms UI 선언","intent":"DonatePage 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DonatePage"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.cs","lines":233,"updatedUtc":"2024-12-22T09:17:11Z","category":"EasyOCR 설치 UI","intent":"내장 Python, pip, EasyOCR 모델과 GPU 패키지 설치 과정을 사용자에게 보여주고 제어한다.","operation":"OcrManager와 PythonModouleService의 비동기 준비 메서드를 순서대로 호출하고 진행·성공·실패 상태를 UI에 반영한다.","generated":false,"documentationSource":"manual","types":["EasyOcrInstaller"],"methods":[{"access":"private","name":"LocalizeComponents","line":34,"signature":"private void LocalizeComponents()"},{"access":"public","name":"Show","line":49,"signature":"public void Show(OcrManager ocrManager, PythonModouleService pythonModouleService, Action closeCallback)"},{"access":"private","name":"ShowInstallMessage","line":73,"signature":"private bool ShowInstallMessage()"},{"access":"private","name":"InstallEasyOcrAsync","line":82,"signature":"private async Task InstallEasyOcrAsync(bool enableGpu, string commandLine = \"…\")"},{"access":"private","name":"ShowGpuSetting","line":135,"signature":"private void ShowGpuSetting()"},{"access":"private","name":"SetGpuCommand","line":147,"signature":"private void SetGpuCommand()"},{"access":"private","name":"OnUpdateLog","line":170,"signature":"private void OnUpdateLog(string log)"},{"access":"private","name":"EasyOcrInstaller_FormClosed","line":176,"signature":"private void EasyOcrInstaller_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"private","name":"ShowCudaVersion","line":187,"signature":"private void ShowCudaVersion()"},{"access":"private","name":"ShowGpuCommandLineVerison","line":194,"signature":"private void ShowGpuCommandLineVerison()"},{"access":"private","name":"btnInstall_Click","line":201,"signature":"private void btnInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"radioButton1_CheckedChanged","line":206,"signature":"private void radioButton1_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGpuCommandLine_CheckedChanged","line":211,"signature":"private void rbGpuCommandLine_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstallStep_Click","line":216,"signature":"private void btnEnableGpuInstallStep_Click(object sender, EventArgs e)"},{"access":"private","name":"btnEnableGpuInstall_Click","line":221,"signature":"private void btnEnableGpuInstall_Click(object sender, EventArgs e)"},{"access":"private","name":"btnGuide_Click","line":227,"signature":"private void btnGuide_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","MORT.Service.PythonService","System","System.Collections.Generic","System.Text.RegularExpressions","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/EasyOcrInstaller/EasyOcrInstaller.Designer.cs","lines":240,"updatedUtc":"2024-12-22T09:17:11Z","category":"WinForms UI 선언","intent":"EasyOcrInstaller 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["EasyOcrInstaller"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1.cs","lines":3640,"updatedUtc":"2026-08-04T09:05:34Z","category":"메인 UI 조정","intent":"사용자 입력과 설정을 각 Manager·Service·보조 폼으로 연결하는 메인 WinForms 조정자다.","operation":"폼 초기화 후 설정과 서비스를 연결하고, 버튼·메뉴·단축키 이벤트를 OCR 시작, 번역, 폼 관리 명령으로 전달한다. 주요 지점은 ClearList, Clear, ClearOriginalData, PDelegateSetSpellCheck, setErode, processOcr, ProcessGetSpellingCheck, ProcessGetDBText 이다.","generated":false,"documentationSource":"automatic","types":["CurrentStateType","Form1","ImgData"],"methods":[{"access":"public","name":"ClearList","line":64,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"Clear","line":83,"signature":"public void Clear()"},{"access":"public","name":"ClearOriginalData","line":92,"signature":"public void ClearOriginalData()"},{"access":"public","name":"PDelegateSetSpellCheck","line":110,"signature":"public delegate void PDelegateSetSpellCheck()"},{"access":"public","name":"setErode","line":190,"signature":"public static extern void setErode()"},{"access":"public","name":"processOcr","line":194,"signature":"public static extern void processOcr(StringBuilder test, StringBuilder test1)"},{"access":"public","name":"ProcessGetSpellingCheck","line":205,"signature":"public static extern void ProcessGetSpellingCheck(StringBuilder ocrResult, bool isUseJpn)"},{"access":"public","name":"ProcessGetDBText","line":209,"signature":"public static extern void ProcessGetDBText(StringBuilder original, StringBuilder result)"},{"access":"public","name":"setCutPoint","line":223,"signature":"public static extern void setCutPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"SetExceptPoint","line":227,"signature":"public static extern void SetExceptPoint(int[] newX, int[] newY, int[] newX2, int[] newY2, int size)"},{"access":"public","name":"initOcr","line":232,"signature":"public static extern void initOcr()"},{"access":"public","name":"setTessdata","line":236,"signature":"public static extern void setTessdata(string tessData, bool isUseJpnFlag)"},{"access":"public","name":"setFiducialValue","line":240,"signature":"public static extern void setFiducialValue(int[] newValueR, int[] newValueG, int[] newValueB, int[] newValueS1, int[] newValueS2, int[] newValueV1, int[] newValueV2, int size)"},{"access":"public","name":"SetIsDebugMode","line":245,"signature":"public static extern void SetIsDebugMode(bool isDebug, bool isShowReplace, bool isSaveCapture, bool isSaveCaptureResult)"},{"access":"public","name":"setUseDB","line":249,"signature":"public static extern void setUseDB(bool newIsUseDBFlag, bool IsUsePartialDB, string newDbFileText)"},{"access":"public","name":"setUseCheckSpelling","line":253,"signature":"public static extern void setUseCheckSpelling(bool newIsUseCheckSpellingFlag, bool isMatchingWord, string newDicFileText)"},{"access":"public","name":"setAdvencedImgOption","line":257,"signature":"public static extern void setAdvencedImgOption(bool newIsUseRGBFlag, bool newIsUseHSVFlag, bool newIsUseErodeFlag, float imgZoomSize, bool isUseThreshold, int thresholdValue)"},{"access":"public","name":"SetIsUseJpn","line":261,"signature":"public static extern void SetIsUseJpn(bool _isUseJpn)"},{"access":"public","name":"SetReCheckSpellingCount","line":265,"signature":"public static extern void SetReCheckSpellingCount(int _reCheckCount)"},{"access":"public","name":"SetIsStringUpper","line":269,"signature":"public static extern void SetIsStringUpper(bool isUpper)"},{"access":"public","name":"SetRemoveSpace","line":273,"signature":"public static extern void SetRemoveSpace(bool isRemove)"},{"access":"public","name":"SetShowOCRIndex","line":277,"signature":"public static extern void SetShowOCRIndex(bool isShow)"},{"access":"public","name":"SetIsActiveWindow","line":281,"signature":"public static extern void SetIsActiveWindow(bool isActiveWindow)"},{"access":"public","name":"AddOcrColorSet","line":285,"signature":"public static extern void AddOcrColorSet(int[] colorList, int size)"},{"access":"public","name":"ClearOcrColorSet","line":289,"signature":"public static extern void ClearOcrColorSet()"},{"access":"private","name":"GetActiveWindowTitle","line":297,"signature":"private string GetActiveWindowTitle()"},{"access":"public","name":"ChangeSkin","line":322,"signature":"public void ChangeSkin()"},{"access":"private","name":"MakeSearchOptionForm","line":371,"signature":"private void MakeSearchOptionForm()"},{"access":"private","name":"MakeRTT","line":378,"signature":"private void MakeRTT()"},{"access":"private","name":"MakeDicEditorForm","line":384,"signature":"private void MakeDicEditorForm()"},{"access":"private","name":"MakeLogo","line":390,"signature":"private void MakeLogo()"},{"access":"private","name":"MakeTransForm","line":418,"signature":"private void MakeTransForm()"},{"access":"private","name":"SetTransFormLocation","line":438,"signature":"private void SetTransFormLocation()"},{"access":"private","name":"CheckGDI","line":575,"signature":"private void CheckGDI()"},{"access":"private","name":"LoadSettingfile","line":603,"signature":"private void LoadSettingfile(string fileName)"},{"access":"public","name":"OpenSettingFile","line":613,"signature":"public void OpenSettingFile(string fileName)"},{"access":"private","name":"InitColorGroup","line":628,"signature":"private void InitColorGroup()"},{"access":"private","name":"InitKeyHooker","line":640,"signature":"private void InitKeyHooker()"},{"access":"private","name":"InitializeTranslateType","line":654,"signature":"private void InitializeTranslateType()"},{"access":"private","name":"UpdateTranslateType","line":661,"signature":"private void UpdateTranslateType()"},{"access":"private","name":"InitTransCode","line":692,"signature":"private void InitTransCode()"},{"access":"internal","name":"SetProcessDPIAware","line":710,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"private","name":"Form1_Load","line":859,"signature":"private void Form1_Load(object sender, EventArgs e)"},{"access":"private","name":"Form1_Shown","line":907,"signature":"private void Form1_Shown(object sender, EventArgs e)"},{"access":"public","name":"GetIsHasError","line":912,"signature":"public bool GetIsHasError()"},{"access":"private","name":"SaveHotKeyFile","line":937,"signature":"private void SaveHotKeyFile()"},{"access":"private","name":"InitHotKey","line":953,"signature":"private void InitHotKey()"},{"access":"private","name":"OpenHotKeyFile","line":997,"signature":"private void OpenHotKeyFile(List\u003cKeyInputLabel\u003e keyList)"},{"access":"private","name":"OpenOldHotKeyFile","line":1028,"signature":"private void OpenOldHotKeyFile()"},{"access":"public","name":"gHook_KeyUp","line":1126,"signature":"public void gHook_KeyUp(object sender, KeyEventArgs e)"},{"access":"public","name":"gHook_KeyDown","line":1131,"signature":"public void gHook_KeyDown(object sender, KeyEventArgs e)"},{"access":"private","name":"ToggleOcrAreaFollowMouse","line":1299,"signature":"private void ToggleOcrAreaFollowMouse()"},{"access":"private","name":"IsUseOnlyOcrAreaFollowMouse","line":1304,"signature":"private bool IsUseOnlyOcrAreaFollowMouse()"},{"access":"public","name":"ClearOcrAreaFollowMouseForm","line":1309,"signature":"public void ClearOcrAreaFollowMouseForm()"},{"access":"private","name":"useBackColorCheckBox_CheckedChanged","line":1321,"signature":"private void useBackColorCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"removeSpaceCheckBox_CheckedChanged","line":1326,"signature":"private void removeSpaceCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"alignmentCenterCheckBox_CheckedChanged","line":1331,"signature":"private void alignmentCenterCheckBox_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOCRIndex_CheckedChanged","line":1336,"signature":"private void cbShowOCRIndex_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"ShowResultFont","line":1341,"signature":"private void ShowResultFont()"},{"access":"private","name":"fontButton_Click","line":1379,"signature":"private void fontButton_Click(object sender, EventArgs e)"},{"access":"private","name":"fontSizeUpDown_ValueChanged","line":1408,"signature":"private void fontSizeUpDown_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultColorButton_Click","line":1414,"signature":"private void defaultColorButton_Click(object sender, EventArgs e)"},{"access":"private","name":"SetColorBoxColor","line":1434,"signature":"private void SetColorBoxColor(PictureBox obj, Color color)"},{"access":"private","name":"textColorBox_Click","line":1455,"signature":"private void textColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor1Box_Click","line":1467,"signature":"private void outlineColor1Box_Click(object sender, EventArgs e)"},{"access":"private","name":"outlineColor2Box_Click","line":1479,"signature":"private void outlineColor2Box_Click(object sender, EventArgs e)"},{"access":"private","name":"backgroundColorBox_Click","line":1491,"signature":"private void backgroundColorBox_Click(object sender, EventArgs e)"},{"access":"private","name":"OnCloseApplication","line":1517,"signature":"private void OnCloseApplication()"},{"access":"private","name":"SetColorValueText","line":1529,"signature":"private void SetColorValueText(ColorGroup nowColorGroup)"},{"access":"private","name":"SaveNaverKeyFile","line":1543,"signature":"private void SaveNaverKeyFile()"},{"access":"private","name":"OpenNaverKeyFile","line":1553,"signature":"private void OpenNaverKeyFile()"},{"access":"private","name":"SaveGoogleKeyFile","line":1576,"signature":"private void SaveGoogleKeyFile()"},{"access":"private","name":"OpenGoogleKeyFile","line":1607,"signature":"private void OpenGoogleKeyFile()"},{"access":"private","name":"OpenDeeplKeyFile","line":1635,"signature":"private void OpenDeeplKeyFile()"},{"access":"private","name":"SaveGeminiKeyFile","line":1646,"signature":"private void SaveGeminiKeyFile()"},{"access":"private","name":"OpenGeminiKeyFile","line":1654,"signature":"private void OpenGeminiKeyFile()"},{"access":"public","name":"ProcessTrans","line":1699,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"SetUseColorGroup","line":1709,"signature":"public void SetUseColorGroup()"},{"access":"public","name":"SetIsRemoveSpace","line":1739,"signature":"public void SetIsRemoveSpace(bool isRemoveSpace)"},{"access":"public","name":"SetTextSort","line":1745,"signature":"public void SetTextSort(SettingManager.SortType sortType)"},{"access":"public","name":"MakeAndStartSnapShop","line":1757,"signature":"public void MakeAndStartSnapShop()"},{"access":"public","name":"ApplySpellCheck","line":1799,"signature":"public void ApplySpellCheck()"},{"access":"private","name":"CloseApplication","line":1803,"signature":"private void CloseApplication()"},{"access":"public","name":"BeforeStartRealTimeTrans","line":1827,"signature":"public void BeforeStartRealTimeTrans()"},{"access":"public","name":"StartTrnas","line":1897,"signature":"public void StartTrnas(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTrans","line":1985,"signature":"public void StopTrans(bool isOnceTrans = false, bool fromKeyHook = false)"},{"access":"public","name":"RevertTempCaptureArea","line":2033,"signature":"public void RevertTempCaptureArea()"},{"access":"private","name":"BackupCaptureArea","line":2059,"signature":"private void BackupCaptureArea()"},{"access":"public","name":"SetCaptureArea","line":2069,"signature":"public void SetCaptureArea()"},{"access":"public","name":"SetTempCaptureArea","line":2075,"signature":"public void SetTempCaptureArea()"},{"access":"private","name":"ApplyCaptureArea","line":2083,"signature":"private void ApplyCaptureArea(bool restartTranslateProcess)"},{"access":"private","name":"GetOcrAreaFormProcessRect","line":2251,"signature":"private Rectangle GetOcrAreaFormProcessRect(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"GetOcrAreaProcessRect","line":2267,"signature":"public Rectangle GetOcrAreaProcessRect(int index)"},{"access":"public","name":"GetOcrAreaProcessFullRect","line":2311,"signature":"public Rectangle GetOcrAreaProcessFullRect()"},{"access":"public","name":"MakeCaptureArea","line":2364,"signature":"public void MakeCaptureArea()"},{"access":"private","name":"Form1_FormClosing","line":2401,"signature":"private void Form1_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"SetImgCheckBox","line":2423,"signature":"private void SetImgCheckBox(bool isUseHsv, bool isUseRgb, bool isUseThreshold)"},{"access":"private","name":"cbThreshold_CheckedChanged","line":2457,"signature":"private void cbThreshold_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"checkRGB_MouseDown","line":2462,"signature":"private void checkRGB_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"checkHSV_MouseDown","line":2467,"signature":"private void checkHSV_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"tesseractLanguageComboBox_SelectionChangeCommitted","line":2472,"signature":"private void tesseractLanguageComboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"ChangeTesseractLanguage","line":2480,"signature":"private void ChangeTesseractLanguage(int index)"},{"access":"private","name":"groupCombo_SelectedIndexChanged","line":2507,"signature":"private void groupCombo_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"textBox_KeyPress","line":2576,"signature":"private void textBox_KeyPress(object sender, KeyPressEventArgs e)"},{"access":"private","name":"rgbTextLeave","line":2584,"signature":"private void rgbTextLeave(object sender, EventArgs e)"},{"access":"private","name":"hsvTextLeave","line":2607,"signature":"private void hsvTextLeave(object sender, EventArgs e)"},{"access":"private","name":"thresholdTextLeave","line":2629,"signature":"private void thresholdTextLeave(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":2651,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextTranslate_Click","line":2708,"signature":"private void ContextTranslate_Click(object sender, EventArgs e)"},{"access":"private","name":"ContextOption_Click","line":2720,"signature":"private void ContextOption_Click(object sender, EventArgs e)"},{"access":"private","name":"setTranslateTopMostToolStripMenuItem_Click","line":2737,"signature":"private void setTranslateTopMostToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCutPointToolStripMenuItem_Click","line":2747,"signature":"private void setCutPointToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"notifyIcon1_MouseClick","line":2753,"signature":"private void notifyIcon1_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"aboutToolStripMenuItem_Click","line":2769,"signature":"private void aboutToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"showTransToolStripMenuItem_Click","line":2785,"signature":"private void showTransToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"setCheckSpellingToolStripMenuItem_Click","line":2790,"signature":"private void setCheckSpellingToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"rTTToolStripMenuItem_Click","line":2799,"signature":"private void rTTToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkUpdateToolStripMenuItem_Click","line":2804,"signature":"private void checkUpdateToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"myDelegate","line":2812,"signature":"private delegate void myDelegate(string transText)"},{"access":"private","name":"updateText","line":2814,"signature":"private void updateText(string transText)"},{"access":"private","name":"Form1_MouseDown","line":2822,"signature":"private void Form1_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"Form1_MouseMove","line":2827,"signature":"private void Form1_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseDown","line":2836,"signature":"private void fromUpImg_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"fromUpImg_MouseMove","line":2841,"signature":"private void fromUpImg_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_Paint","line":2852,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"settingSaveToolStripMenuItem2_Click","line":2872,"signature":"private void settingSaveToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingLoadToolStripMenuItem2_Click","line":2888,"signature":"private void settingLoadToolStripMenuItem2_Click(object sender, EventArgs e)"},{"access":"private","name":"settingDefaultToolStripMenuItem_Click","line":2909,"signature":"private void settingDefaultToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"checkDic_CheckedChanged","line":2947,"signature":"private void checkDic_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":2953,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_SelectedIndexChanged","line":2962,"signature":"private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SetDefaultZoomSizeButton_Click","line":2970,"signature":"private void SetDefaultZoomSizeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"help_Button_Click","line":2976,"signature":"private void help_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"error_Information_Button_Click","line":2981,"signature":"private void error_Information_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"about_Button_Click","line":2986,"signature":"private void about_Button_Click(object sender, EventArgs e)"},{"access":"private","name":"OCR_Type_comboBox_SelectedIndexChanged","line":3008,"signature":"private void OCR_Type_comboBox_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"CbTranslateTypeSelectedIndexChanged","line":3189,"signature":"private void CbTranslateTypeSelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"RbDeepLAPIEndpoint_CheckedChanged","line":3247,"signature":"private void RbDeepLAPIEndpoint_CheckedChanged(object sender, System.EventArgs e)"},{"access":"private","name":"SetEmptyTansKey","line":3253,"signature":"private void SetEmptyTansKey()"},{"access":"private","name":"SetEmptyDicKey","line":3259,"signature":"private void SetEmptyDicKey()"},{"access":"private","name":"SetEmptyQuickKey","line":3265,"signature":"private void SetEmptyQuickKey()"},{"access":"private","name":"SetEmptySnapShotKey","line":3271,"signature":"private void SetEmptySnapShotKey()"},{"access":"private","name":"SetEmptyOneTranslate","line":3277,"signature":"private void SetEmptyOneTranslate()"},{"access":"private","name":"SetEmptyHideTranslate","line":3281,"signature":"private void SetEmptyHideTranslate()"},{"access":"private","name":"SetEmptyFollowMouse","line":3286,"signature":"private void SetEmptyFollowMouse()"},{"access":"private","name":"InitTansKey","line":3294,"signature":"private void InitTansKey()"},{"access":"private","name":"InitDicKey","line":3300,"signature":"private void InitDicKey()"},{"access":"private","name":"InitQuickKey","line":3306,"signature":"private void InitQuickKey()"},{"access":"private","name":"InitSnapShotKey","line":3312,"signature":"private void InitSnapShotKey()"},{"access":"private","name":"InitOneTranslateKey","line":3318,"signature":"private void InitOneTranslateKey()"},{"access":"private","name":"InitHideTransKey","line":3325,"signature":"private void InitHideTransKey()"},{"access":"private","name":"InitFollowMouseKey","line":3331,"signature":"private void InitFollowMouseKey()"},{"access":"private","name":"SetTransLangugage","line":3343,"signature":"private void SetTransLangugage(string ocrCode)"},{"access":"private","name":"ChangeWinOcrLanguage","line":3392,"signature":"private void ChangeWinOcrLanguage(int index)"},{"access":"private","name":"ChangeEasyOcrLanguage","line":3410,"signature":"private void ChangeEasyOcrLanguage(int index)"},{"access":"private","name":"CheckRemoveSpaceLanguage","line":3428,"signature":"private void CheckRemoveSpaceLanguage(string resultCode)"},{"access":"private","name":"ChangeMainOcrLangauge","line":3447,"signature":"private void ChangeMainOcrLangauge(OcrLanguageType ocrLanguageType)"},{"access":"private","name":"cbGoogleOcrLanguge_SelectedIndexChanged","line":3463,"signature":"private void cbGoogleOcrLanguge_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"WinOCR_Language_comboBox_SelectionChangeCommitted","line":3499,"signature":"private void WinOCR_Language_comboBox_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"cbEasyOcrOcde_SelectionChangeCommitted","line":3504,"signature":"private void cbEasyOcrOcde_SelectionChangeCommitted(object sender, EventArgs e)"},{"access":"private","name":"tabControl1_DrawItem","line":3509,"signature":"private void tabControl1_DrawItem(Object sender, System.Windows.Forms.DrawItemEventArgs e)"},{"access":"private","name":"button_RemoveAllGoogleToekn_Click","line":3549,"signature":"private void button_RemoveAllGoogleToekn_Click(object sender, EventArgs e)"},{"access":"private","name":"donationButton_Click","line":3560,"signature":"private void donationButton_Click(object sender, EventArgs e)"},{"access":"private","name":"ShowDonationPopup","line":3565,"signature":"private void ShowDonationPopup()"},{"access":"private","name":"Button_NaverTransKeyList_Click","line":3581,"signature":"private void Button_NaverTransKeyList_Click(object sender, EventArgs e)"},{"access":"private","name":"Form1_FormClosed","line":3602,"signature":"private void Form1_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ForceDisableTopMost","line":3610,"signature":"public void ForceDisableTopMost()"},{"access":"private","name":"btnInstallEasyOcr_Click","line":3616,"signature":"private void btnInstallEasyOcr_Click(object sender, EventArgs e)"},{"access":"private","name":"btnAddWinOcrLanguage_Click","line":3621,"signature":"private void btnAddWinOcrLanguage_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOneOcrLanguage_SelectedIndexChanged","line":3627,"signature":"private void cbOneOcrLanguage_SelectedIndexChanged(object sender, EventArgs e)"}],"dependencies":["MORT.Logger","MORT.Manager","MORT.Model","MORT.OcrApi.WindowOcr","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.ProcessTranslateService","MORT.Service.PythonService","MORT.VersionCheck","System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading","System.Windows.Forms","MORT.Service.TranslateTyp"]},{"path":"MORT/Form1.Designer.cs","lines":4410,"updatedUtc":"2026-08-04T03:58:59Z","category":"WinForms UI 선언","intent":"Form1 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Form1"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Form1Button.cs","lines":317,"updatedUtc":"2026-08-04T03:58:39Z","category":"메인 명령 연결","intent":"Form1의 버튼과 메뉴 동작을 기능별 메서드로 분리해 OCR 시작, 스냅샷, 폼 표시와 마우스 추적 명령을 연결한다.","operation":"각 이벤트 메서드가 현재 설정과 실행 중 상태를 확인한 뒤 ProcessTranslateService, FormManager 또는 MouseFollowOcrAreaService의 공개 동작을 호출한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"OnClick_btnTransHelp","line":11,"signature":"private void OnClick_btnTransHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btOcrHelp","line":15,"signature":"private void OnClick_btOcrHelp(object sender, EventArgs e)"},{"access":"private","name":"OnClick_GitHub","line":20,"signature":"private void OnClick_GitHub(object sender, EventArgs e)"},{"access":"private","name":"OnClickopenBlog","line":26,"signature":"private void OnClickopenBlog(object sender, EventArgs e)"},{"access":"private","name":"OnClickOpenDiscord","line":30,"signature":"private void OnClickOpenDiscord(object sender, EventArgs e)"},{"access":"private","name":"OnClickShowImgResult","line":46,"signature":"private void OnClickShowImgResult(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btGoogleOcrSetting","line":72,"signature":"private void OnClick_btGoogleOcrSetting(object sender, EventArgs e)"},{"access":"private","name":"OnClickQucickEnglish","line":79,"signature":"private void OnClickQucickEnglish(object sender, EventArgs e)"},{"access":"private","name":"OnClickQuickJap","line":84,"signature":"private void OnClickQuickJap(object sender, EventArgs e)"},{"access":"private","name":"OnClick_DebugOn","line":94,"signature":"private void OnClick_DebugOn(object sender, EventArgs e)"},{"access":"private","name":"cbUnlockSpeed_CheckedChanged","line":108,"signature":"private void cbUnlockSpeed_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowFormerLog_CheckedChanged","line":115,"signature":"private void cbShowFormerLog_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btClearFormerResult_Click","line":123,"signature":"private void btClearFormerResult_Click(object sender, EventArgs e)"},{"access":"private","name":"cbSetLineTrans_CheckedChanged","line":131,"signature":"private void cbSetLineTrans_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbShowOverlayWordArea_CheckedChanged","line":139,"signature":"private void cbShowOverlayWordArea_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"cbSaveAnalysisResult_CheckedChanged","line":147,"signature":"private void cbSaveAnalysisResult_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAdvencedOption","line":157,"signature":"private void OnClick_btAdvencedOption(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btAttachCapture","line":163,"signature":"private void OnClick_btAttachCapture(object sender, EventArgs e)"},{"access":"private","name":"Onclick_btSettingBrowser","line":174,"signature":"private void Onclick_btSettingBrowser(object sender, EventArgs e)"},{"access":"private","name":"OnClick_btSettingUpload","line":178,"signature":"private void OnClick_btSettingUpload(object sender, EventArgs e)"},{"access":"private","name":"OnClickCheckDeeplState","line":217,"signature":"private void OnClickCheckDeeplState(object sender, EventArgs e)"},{"access":"private","name":"cbUseTTS_CheckedChanged","line":225,"signature":"private void cbUseTTS_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputResetButton_Click","line":241,"signature":"private void transKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputResetButton_Click","line":247,"signature":"private void dicKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputResetButton_Click","line":252,"signature":"private void quickKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputResetButton_Click","line":257,"signature":"private void snapShotKeyInputResetButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransDefault_Click","line":262,"signature":"private void btnOneTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransDefault_Click","line":267,"signature":"private void btnHideTransDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseDefault_Click","line":273,"signature":"private void btnFollowMouseDefault_Click(object sender, EventArgs e)"},{"access":"private","name":"transKeyInputEmptyButton_Click","line":278,"signature":"private void transKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"dicKeyInputEmptyButton_Click","line":283,"signature":"private void dicKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"quickKeyInputEmptyButton_Click","line":288,"signature":"private void quickKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"snapShotKeyInputEmptyButton_Click","line":293,"signature":"private void snapShotKeyInputEmptyButton_Click(object sender, EventArgs e)"},{"access":"private","name":"btnOneTransEmpty_Click","line":298,"signature":"private void btnOneTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnHideTransEmpty_Click","line":303,"signature":"private void btnHideTransEmpty_Click(object sender, EventArgs e)"},{"access":"private","name":"btnFollowMouseEmpty_Click","line":308,"signature":"private void btnFollowMouseEmpty_Click(object sender, EventArgs e)"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Diagnostics","System.Windows.Forms"]},{"path":"MORT/FormClipboardAssist.cs","lines":83,"updatedUtc":"2025-12-01T14:55:49Z","category":"클립보드 번역 UI","intent":"클립보드 감시 활성화와 원문·처리중 표시 옵션을 제어하고 번역 결과를 사용자에게 제공한다.","operation":"ClipboardMonitor 이벤트를 받아 자기 기록과 중복 입력을 걸러 ProcessTranslateService의 클립보드 번역 경로로 전달한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"public","name":"InitClipboardMonitor","line":17,"signature":"public void InitClipboardMonitor(bool isUse)"},{"access":"public","name":"TextChangeAsync","line":37,"signature":"public async void TextChangeAsync(string text)"}],"dependencies":["MORT.ClipboardAssist"]},{"path":"MORT/FormLocalize.cs","lines":416,"updatedUtc":"2026-06-07T16:18:42Z","category":"UI 로컬라이즈 연결","intent":"메인 폼과 보조 폼의 컨트롤을 LocalizeManager 키에 연결하는 로컬라이즈 적용 코드다.","operation":"현재 AppLanguage로 키를 조회해 메뉴·버튼·레이블 Text를 설정하며 폼 구조와 번역 데이터를 이어준다.","generated":false,"documentationSource":"manual","types":["Form1","ComponenetLoclize"],"methods":[{"access":"private","name":"InitLocalize","line":12,"signature":"private void InitLocalize()"},{"access":"private","name":"LocalizeString","line":33,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"LocalizeContext","line":38,"signature":"private void LocalizeContext()"},{"access":"private","name":"LocalizeBasicForm","line":55,"signature":"private void LocalizeBasicForm()"},{"access":"public","name":"LocalizeLabel","line":331,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, string key)"},{"access":"public","name":"LocalizeLabel","line":343,"signature":"public static void LocalizeLabel(this ToolStripMenuItem item, string key)"},{"access":"public","name":"LocalizeItems","line":348,"signature":"public static void LocalizeItems(this System.Windows.Forms.ComboBox comboBox)"},{"access":"public","name":"LocalizeLabel","line":376,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control)"},{"access":"public","name":"LocalizeLabel","line":389,"signature":"public static void LocalizeLabel(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, string key, int left, int min = 0)"},{"access":"public","name":"Anchor","line":403,"signature":"public static void Anchor(this System.Windows.Forms.Control control, System.Windows.Forms.Control target, int left, int min = 0)"}],"dependencies":["System","System.Collections.Generic","System.Globalization","System.Windows.Forms","MORT.LocalizeManager","MORT.TransAPI"]},{"path":"MORT/FormOption.cs","lines":1193,"updatedUtc":"2026-05-19T13:44:18Z","category":"기본 설정 UI","intent":"OCR·번역·언어·스킨 등 자주 쓰는 설정을 편집하고 실행 중 매니저 상태에 적용하는 기본 옵션 폼이다.","operation":"열릴 때 SettingManager 값을 컨트롤에 채우고 변경·확인 이벤트에서 언어 코드와 번역기 초기화, 설정 저장을 순서대로 수행한다.","generated":false,"documentationSource":"manual","types":["Form1"],"methods":[{"access":"private","name":"SetValueToUIValue","line":21,"signature":"private void SetValueToUIValue()"},{"access":"private","name":"SetTranslatorUIValue","line":270,"signature":"private void SetTranslatorUIValue()"},{"access":"private","name":"SaveSetting","line":382,"signature":"private void SaveSetting(string fileName)"},{"access":"public","name":"ApplyUIValueToSetting","line":432,"signature":"public void ApplyUIValueToSetting()"},{"access":"private","name":"ApplyTransSetting","line":793,"signature":"private void ApplyTransSetting()"},{"access":"private","name":"CheckAndStopTransThread","line":907,"signature":"private bool CheckAndStopTransThread()"},{"access":"public","name":"ApplyTransTypeFromHotKey","line":919,"signature":"public void ApplyTransTypeFromHotKey(SettingManager.TransType transType, string notice)"},{"access":"public","name":"ApplyFromQuickSetting","line":968,"signature":"public void ApplyFromQuickSetting(QuickSettingData data)"},{"access":"public","name":"ApplyBasicFont","line":1067,"signature":"public void ApplyBasicFont()"},{"access":"private","name":"ApplyRTL","line":1098,"signature":"private void ApplyRTL(bool enableRTL)"},{"access":"private","name":"ApplyLayerTextAlignmentBottom","line":1107,"signature":"private void ApplyLayerTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"ApplyLayerTextAlignmentRight","line":1116,"signature":"private void ApplyLayerTextAlignmentRight(bool isRight)"},{"access":"private","name":"ApplyAutoMergeText","line":1125,"signature":"private void ApplyAutoMergeText()"},{"access":"private","name":"ApplyTopMostOptionWhenTranslate","line":1137,"signature":"private void ApplyTopMostOptionWhenTranslate(bool useOption)"},{"access":"private","name":"ApplyTranslateMemory","line":1147,"signature":"private void ApplyTranslateMemory()"},{"access":"public","name":"ApplyAdvencedOption","line":1152,"signature":"public void ApplyAdvencedOption()"},{"access":"public","name":"ApplyCoreAdvencedOption","line":1186,"signature":"public void ApplyCoreAdvencedOption()"}],"dependencies":["MORT.Manager","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Net","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.cs","lines":62,"updatedUtc":"2023-07-13T10:38:58Z","category":"Google OCR 설정 UI","intent":"Google Vision 자격 증명 파일 목록과 사용량·우선순위 설정을 편집한다.","operation":"OcrManager의 GoogleOcrSetting을 화면에 표시하고 JSON 경로 추가·제거·검증 결과를 저장 및 재초기화한다.","generated":false,"documentationSource":"manual","types":["UIGoogleOcrSetting"],"methods":[{"access":"private","name":"Init","line":13,"signature":"private void Init()"},{"access":"private","name":"btOpenFile_Click","line":20,"signature":"private void btOpenFile_Click(object sender, EventArgs e)"},{"access":"private","name":"UIGoogleOcrSetting_Load","line":38,"signature":"private void UIGoogleOcrSetting_Load(object sender, EventArgs e)"},{"access":"private","name":"cbUseDefault_CheckedChanged","line":43,"signature":"private void cbUseDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"btnReadMe_Click","line":52,"signature":"private void btnReadMe_Click(object sender, EventArgs e)"}],"dependencies":["MORT.Manager","System","System.Windows.Forms"]},{"path":"MORT/GoogleOcrSetting/UIGoogleOcrSetting.Designer.cs","lines":173,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIGoogleOcrSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIGoogleOcrSetting"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/IMainFormContract.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"메인 폼 계약","intent":"번역 API나 보조 구성요소가 구체적인 Form1 전체에 결합하지 않고 필요한 메인 폼 동작만 호출하도록 계약을 정의한다.","operation":"구현체가 제공할 상태 갱신·메시지·콜백 멤버를 선언하고 소비자는 인터페이스 참조를 통해 호출한다.","generated":false,"documentationSource":"manual","types":["IMainFormContract"],"methods":[],"dependencies":[]},{"path":"MORT/Interface/ITransform.cs","lines":35,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TranslateStatusType, ITransform 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TranslateStatusType","ITransform"],"methods":[],"dependencies":["System"]},{"path":"MORT/KeyHook/GlobalKeyboardHook.cs","lines":98,"updatedUtc":"2023-07-13T10:38:58Z","category":"전역 키 입력","intent":"앱에 포커스가 없어도 설정된 OCR·번역 단축키를 감지하기 위해 Windows 저수준 키보드 훅을 관리한다.","operation":"SetWindowsHookEx로 콜백을 등록하고 키 down/up과 보조키 상태를 조합해 구독자에게 전달하며 종료 시 UnhookWindowsHookEx를 호출한다.","generated":false,"documentationSource":"manual","types":["GlobalKeyboardHook"],"methods":[{"access":"public","name":"LLKeyboardHook","line":26,"signature":"public delegate int LLKeyboardHook(int Code, int wParam, ref keyBoardHookStruct lParam)"},{"access":"public","name":"hook","line":63,"signature":"public void hook()"},{"access":"public","name":"unhook","line":69,"signature":"public void unhook()"},{"access":"public","name":"HookProc","line":74,"signature":"public int HookProc(int Code, int wParam, ref keyBoardHookStruct lParam)"}],"dependencies":["System","System.Collections.Generic","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.cs","lines":253,"updatedUtc":"2026-06-07T16:18:42Z","category":"단축키 입력 UI","intent":"사용자가 누르는 키 조합을 캡처해 설정 가능한 단축키 문자열과 코드로 표시한다.","operation":"포커스 중 키 이벤트를 가로채 modifier와 본 키를 조합하고 유효성 확인 뒤 Label 표시와 내부 키 값을 함께 갱신한다.","generated":false,"documentationSource":"manual","types":["KeyInputLabel","KeyType"],"methods":[{"access":"public","name":"SetDefaultKey","line":23,"signature":"public void SetDefaultKey()"},{"access":"private","name":"textBox1_KeyDown","line":76,"signature":"private void textBox1_KeyDown(object sender, KeyEventArgs e)"},{"access":"public","name":"GetKeyListToString","line":130,"signature":"public string GetKeyListToString()"},{"access":"public","name":"SetKeyList","line":146,"signature":"public void SetKeyList(string data)"},{"access":"public","name":"SetKeyList","line":165,"signature":"public void SetKeyList(List\u003cKeys\u003e list)"},{"access":"public","name":"GetResult","line":183,"signature":"public static bool GetResult(List\u003cKeys\u003e inputList, List\u003cKeys\u003e keyList)"},{"access":"public","name":"GetIsCorrect","line":213,"signature":"public bool GetIsCorrect(List\u003cKeys\u003e list)"},{"access":"public","name":"SetEmpty","line":229,"signature":"public void SetEmpty()"},{"access":"public","name":"SetText","line":237,"signature":"public void SetText(string text)"},{"access":"private","name":"KeyInputLabel_Enter","line":242,"signature":"private void KeyInputLabel_Enter(object sender, EventArgs e)"},{"access":"private","name":"KeyInputLabel_Leave","line":247,"signature":"private void KeyInputLabel_Leave(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/KeyInputLabel.Designer.cs","lines":62,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"KeyInputLabel 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["KeyInputLabel"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/LocalizeManager/ILocalizeForm.cs","lines":7,"updatedUtc":"2023-07-13T10:38:58Z","category":"로컬라이즈","intent":"ILocalizeForm 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["ILocalizeForm"],"methods":[],"dependencies":[]},{"path":"MORT/LocalizeManager/LocalizeManager.cs","lines":169,"updatedUtc":"2025-12-01T14:55:49Z","category":"로컬라이즈","intent":"AppLanguage, LocalizeData, ILocalize, LocalizeManager 타입으로 앱 언어 선택, 로컬라이즈 데이터 조회 또는 폼의 번역 계약을 제공한다.","operation":"CSV에서 키별 언어 값을 읽고 현재 AppLanguage에 맞는 문자열을 폼에 반환한다.","generated":false,"documentationSource":"automatic","types":["AppLanguage","LocalizeData","ILocalize","LocalizeManager"],"methods":[{"access":"public","name":"Init","line":54,"signature":"public static void Init(string data, AppLanguage language)"},{"access":"public","name":"ConvertAppLanguage","line":74,"signature":"public static AppLanguage ConvertAppLanguage(string value)"},{"access":"public","name":"GetLocalizeString","line":120,"signature":"public static string GetLocalizeString(string key, string defaultText = \"…\", AppLanguage appLanguage = AppLanguage.Auto)"}],"dependencies":["Microsoft.VisualBasic.FileIO","System.Collections.Generic","System.Globalization","System.IO","System.Linq"]},{"path":"MORT/Logger/LoggerForm.cs","lines":187,"updatedUtc":"2026-05-04T13:03:18Z","category":"사용자 인터페이스","intent":"LoggerForm, Logger, LogEventArgs, CountChangedEventArgs 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnFormClosed, SubscribeLogger, UnsubscribeLogger, Logger_LogAdded, Logger_OcrCountIncreased, Logger_TransCountIncreased, RefreshAll, RefreshCountsSafe 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["LoggerForm","Logger","LogEventArgs","CountChangedEventArgs"],"methods":[{"access":"protected","name":"OnFormClosed","line":17,"signature":"protected override void OnFormClosed(FormClosedEventArgs e)"},{"access":"private","name":"SubscribeLogger","line":22,"signature":"private void SubscribeLogger()"},{"access":"private","name":"UnsubscribeLogger","line":30,"signature":"private void UnsubscribeLogger()"},{"access":"private","name":"Logger_LogAdded","line":38,"signature":"private void Logger_LogAdded(object? sender, Logger.LogEventArgs e)"},{"access":"private","name":"Logger_OcrCountIncreased","line":52,"signature":"private void Logger_OcrCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"Logger_TransCountIncreased","line":57,"signature":"private void Logger_TransCountIncreased(object? sender, Logger.CountChangedEventArgs e)"},{"access":"private","name":"RefreshAll","line":62,"signature":"private void RefreshAll()"},{"access":"private","name":"RefreshCountsSafe","line":72,"signature":"private void RefreshCountsSafe()"},{"access":"private","name":"RefreshCounts","line":77,"signature":"private void RefreshCounts()"},{"access":"private","name":"ScrollRichTextBoxToBottom","line":82,"signature":"private void ScrollRichTextBoxToBottom()"},{"access":"private","name":"SafeInvoke","line":90,"signature":"private void SafeInvoke(Action action)"},{"access":"public","name":"AddLog","line":139,"signature":"public static void AddLog(string message)"},{"access":"private","name":"AddLogInternal","line":144,"signature":"private void AddLogInternal(string message)"},{"access":"public","name":"IncrementOcr","line":159,"signature":"public static void IncrementOcr()"},{"access":"public","name":"IncrementTrans","line":165,"signature":"public static void IncrementTrans()"},{"access":"private","name":"IncrementOcrInternal","line":171,"signature":"private void IncrementOcrInternal()"},{"access":"private","name":"IncrementTransInternal","line":176,"signature":"private void IncrementTransInternal()"},{"access":"public","name":"IncrementOcrInstance","line":184,"signature":"public void IncrementOcrInstance() =\u003e IncrementOcrInternal()"},{"access":"public","name":"IncrementTransInstance","line":185,"signature":"public void IncrementTransInstance() =\u003e IncrementTransInternal()"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/Logger/LoggerForm.Designer.cs","lines":87,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"LoggerForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["LoggerForm"],"methods":[{"access":"protected","name":"Dispose","line":17,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":32,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Logo.cs","lines":63,"updatedUtc":"2025-03-09T09:32:51Z","category":"시작 UI","intent":"애플리케이션 초기화 동안 로고와 버전 정보를 보여주는 시작용 폼이다.","operation":"폼 표시 후 초기화 진행과 닫기 타이밍을 메인 시작 흐름에 맞추며 사용자 입력 기능은 최소화한다.","generated":false,"documentationSource":"manual","types":["Logo"],"methods":[{"access":"private","name":"myDelegate","line":19,"signature":"private delegate void myDelegate()"},{"access":"private","name":"closeForm","line":20,"signature":"private void closeForm()"},{"access":"private","name":"disableLogoThread","line":24,"signature":"private void disableLogoThread(float time)"},{"access":"public","name":"disableLogo","line":35,"signature":"public void disableLogo(float newTime)"},{"access":"public","name":"closeApplication","line":44,"signature":"public void closeApplication()"},{"access":"public","name":"SetTopmost","line":55,"signature":"public static void SetTopmost(bool isTopMost)"}],"dependencies":["System","System.Threading","System.Windows.Forms"]},{"path":"MORT/Logo.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"Logo 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Logo"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Manager/FormManager.cs","lines":1198,"updatedUtc":"2026-06-14T03:28:55Z","category":"폼 수명 관리","intent":"번역창, OCR 영역, 설정창과 보조 UI의 단일 참조·목록·생성·파괴 순서를 관리한다.","operation":"Make/Show 메서드가 폼을 만들고 참조를 보관하며, Destroy 계열이 Dispose 상태와 목록을 정리한다. GetITransform은 현재 스킨 폼을 공통 인터페이스로 반환한다.","generated":false,"documentationSource":"automatic","types":["FormManager","TransFormState"],"methods":[{"access":"public","name":"InitCustomLabelString","line":19,"signature":"public static void InitCustomLabelString(string first, string second)"},{"access":"public","name":"GetIsRemain","line":84,"signature":"public static bool GetIsRemain()"},{"access":"public","name":"CloseApplication","line":95,"signature":"public void CloseApplication()"},{"access":"public","name":"MakeSearchOptionForm","line":101,"signature":"public void MakeSearchOptionForm()"},{"access":"public","name":"DestorySearchOptionForm","line":147,"signature":"public void DestorySearchOptionForm()"},{"access":"public","name":"ShowNaverKeyListUI","line":154,"signature":"public void ShowNaverKeyListUI(Action callback)"},{"access":"public","name":"DestoryNaverKeyListUI","line":168,"signature":"public void DestoryNaverKeyListUI()"},{"access":"public","name":"ShowSettingBrowserUI","line":178,"signature":"public void ShowSettingBrowserUI()"},{"access":"public","name":"DestorySettingBrowserUI","line":191,"signature":"public void DestorySettingBrowserUI()"},{"access":"public","name":"ShowScreenCapture","line":202,"signature":"public void ShowScreenCapture()"},{"access":"public","name":"ShowQuickSetting","line":254,"signature":"public void ShowQuickSetting(OcrLanguageType languageType)"},{"access":"public","name":"DestoryQuickSetting","line":268,"signature":"public void DestoryQuickSetting()"},{"access":"public","name":"ShowAdvencedOption","line":279,"signature":"public void ShowAdvencedOption()"},{"access":"public","name":"DestoryAdvencedOption","line":293,"signature":"public void DestoryAdvencedOption()"},{"access":"public","name":"ShowGoogleOcrSetting","line":303,"signature":"public void ShowGoogleOcrSetting()"},{"access":"public","name":"ShowDonatePage","line":322,"signature":"public void ShowDonatePage()"},{"access":"public","name":"DestoryDonatePage","line":335,"signature":"public void DestoryDonatePage()"},{"access":"public","name":"ShowEasyOcrInstaller","line":345,"signature":"public void ShowEasyOcrInstaller(OcrManager ocrManager, PythonModouleService pythonModouleService)"},{"access":"public","name":"MakeDicEditorForm","line":360,"signature":"public void MakeDicEditorForm(string nowOcrString, bool isUseJpnFlag, string dicFileText)"},{"access":"public","name":"DestoryDicEditorForm","line":380,"signature":"public void DestoryDicEditorForm()"},{"access":"public","name":"ShowColorGroupForm","line":390,"signature":"public void ShowColorGroupForm(OcrAreaForm ocrAreaForm)"},{"access":"public","name":"InitUseColorGroup","line":404,"signature":"public void InitUseColorGroup()"},{"access":"public","name":"ResetUseColorGroup","line":452,"signature":"public void ResetUseColorGroup()"},{"access":"public","name":"ShowColorPickResult","line":465,"signature":"public void ShowColorPickResult(bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"public","name":"GetIsShowOcrAreaFlag","line":492,"signature":"public bool GetIsShowOcrAreaFlag()"},{"access":"public","name":"MakeQuickCaptureAreaForm","line":509,"signature":"public void MakeQuickCaptureAreaForm()"},{"access":"public","name":"MakeSnapShotAreaForm","line":515,"signature":"public void MakeSnapShotAreaForm(Action callback = null)"},{"access":"public","name":"MakeCpatureAreaForm","line":519,"signature":"public void MakeCpatureAreaForm(Action callback = null)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":524,"signature":"public void MakeOcrAreaFollowMouseForm(Action callback = null)"},{"access":"public","name":"MakeExceptionAreaForm","line":529,"signature":"public void MakeExceptionAreaForm()"},{"access":"public","name":"ResetCaputreAreaForm","line":534,"signature":"public void ResetCaputreAreaForm()"},{"access":"public","name":"RefreshOCRAreaForm","line":554,"signature":"public void RefreshOCRAreaForm()"},{"access":"public","name":"AddOcrAreaForm","line":573,"signature":"public void AddOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"AddExceptionAreaForm","line":596,"signature":"public void AddExceptionAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeQuickOcrAreaForm","line":601,"signature":"public void MakeQuickOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeSnapShotOcrAreaForm","line":606,"signature":"public void MakeSnapShotOcrAreaForm(OcrAreaForm newForm)"},{"access":"public","name":"MakeOcrAreaFollowMouseForm","line":611,"signature":"public void MakeOcrAreaFollowMouseForm(OcrAreaForm newForm)"},{"access":"public","name":"DestroyOcrAreaFollowMouseForm","line":616,"signature":"public void DestroyOcrAreaFollowMouseForm()"},{"access":"public","name":"DestoryAllOcrAreaForm","line":628,"signature":"public void DestoryAllOcrAreaForm(bool isRemoveQuick)"},{"access":"public","name":"DestoryOcrAreaForm","line":680,"signature":"public void DestoryOcrAreaForm(int index)"},{"access":"public","name":"DestoryExceptionArea","line":715,"signature":"public void DestoryExceptionArea(int index)"},{"access":"public","name":"GetOcrAreaCount","line":724,"signature":"public int GetOcrAreaCount()"},{"access":"public","name":"SetInvisibleOcrArea","line":746,"signature":"public void SetInvisibleOcrArea()"},{"access":"public","name":"SetTopMostOcrArea","line":769,"signature":"public void SetTopMostOcrArea(bool isTopMost)"},{"access":"public","name":"GetOCRArea","line":792,"signature":"public OcrAreaForm GetOCRArea(int index)"},{"access":"public","name":"MakeRTT","line":808,"signature":"public void MakeRTT()"},{"access":"public","name":"GetITransform","line":832,"signature":"public ITransform GetITransform()"},{"access":"public","name":"ApplyWarningMessage","line":854,"signature":"public void ApplyWarningMessage(string message)"},{"access":"public","name":"ClearWarningMessage","line":864,"signature":"public void ClearWarningMessage()"},{"access":"public","name":"SetForceTransparency","line":874,"signature":"public void SetForceTransparency(bool isTranslating)"},{"access":"public","name":"HideTransFrom","line":885,"signature":"public bool HideTransFrom()"},{"access":"public","name":"SetTopMostTransform","line":913,"signature":"public void SetTopMostTransform(bool isTopMost)"},{"access":"public","name":"SetTemporaryDisableTopMostTransform","line":930,"signature":"public void SetTemporaryDisableTopMostTransform()"},{"access":"public","name":"ResetTemporaryDisableTopMostTransform","line":948,"signature":"public void ResetTemporaryDisableTopMostTransform()"},{"access":"public","name":"MakeBasicTransForm","line":958,"signature":"public void MakeBasicTransForm(bool isTranslateFormTopMostFlag)"},{"access":"public","name":"MakeLayerTransForm","line":983,"signature":"public void MakeLayerTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"MakeOverTransForm","line":1021,"signature":"public void MakeOverTransForm(bool isTranslateFormTopMostFlag, bool isProcessTransFlag)"},{"access":"public","name":"DestoryTransForm","line":1092,"signature":"public void DestoryTransForm()"},{"access":"public","name":"SetVisibleTrans","line":1115,"signature":"public void SetVisibleTrans()"},{"access":"public","name":"VisibleOverlayTrans","line":1130,"signature":"public void VisibleOverlayTrans(int waitTime)"},{"access":"public","name":"AddText","line":1139,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":1158,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ShowPopupMessage","line":1172,"signature":"public static void ShowPopupMessage(string title, string message, Action callback = null)"},{"access":"public","name":"ShowTwoButtonPopupMessage","line":1183,"signature":"public static void ShowTwoButtonPopupMessage(string title, string message, Action callback = null)"}],"dependencies":["MORT.GoogleOcrSetting","MORT.Manager","MORT.OcrApi.EasyOcr","MORT.ScreenCapture","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Manager/OCRDataManager.cs","lines":1218,"updatedUtc":"2026-08-04T06:46:36Z","category":"OCR 결과 모델링","intent":"엔진마다 다른 단어·줄·좌표 결과를 영역별 공통 모델로 정규화하고 번역 결과와 결합한다.","operation":"AddData가 OCR 결과를 ResultData로 만들고 InitLine이 읽기 순서와 병합을 계산하며 ApplyTransResult가 번역 문자열을 위치 데이터에 대응시킨다.","generated":false,"documentationSource":"automatic","types":["OCRDataManager","WordAngleType","TransData","LineData","ResultData"],"methods":[{"access":"public","name":"CheckIsSameLine","line":224,"signature":"public bool CheckIsSameLine(LineData lineData, bool mergeLine)"},{"access":"public","name":"GetIsEndLine","line":260,"signature":"public bool GetIsEndLine()"},{"access":"public","name":"AddAutoColor","line":303,"signature":"public void AddAutoColor(Color fontColor, Color backGroundColor)"},{"access":"public","name":"ReplaceAutoColor","line":309,"signature":"public void ReplaceAutoColor(ResultData source)"},{"access":"public","name":"out","line":329,"signature":"public bool TryGetAutoColor(int index, out (Color Font, Color BackGround) color)"},{"access":"public","name":"GetOCR","line":342,"signature":"public string GetOCR()"},{"access":"public","name":"GetTrans","line":357,"signature":"public string GetTrans()"},{"access":"public","name":"GetOcrText","line":368,"signature":"public List\u003cstring\u003e GetOcrText()"},{"access":"private","name":"IsTitleData","line":386,"signature":"private static bool IsTitleData(LineData lineData, bool removeSpaceMode)"},{"access":"public","name":"InitLine","line":405,"signature":"public void InitLine(bool mergeLine, bool removeSpaceMode)"},{"access":"private","name":"InitSpatialLines","line":424,"signature":"private void InitSpatialLines(bool removeSpaceMode)"},{"access":"private","name":"CanAppendToBlock","line":505,"signature":"private static bool CanAppendToBlock(TransData current, LineData previous, LineData candidate)"},{"access":"private","name":"GetFontRatio","line":548,"signature":"private static double GetFontRatio(double first, double second)"},{"access":"private","name":"HasListContext","line":554,"signature":"private static bool HasListContext(List\u003cLineData\u003e component)"},{"access":"private","name":"IsListItem","line":574,"signature":"private static bool IsListItem(LineData lineData, bool hasListContext)"},{"access":"private","name":"IsStrongListMarker","line":583,"signature":"private static bool IsStrongListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsWeakListMarkerCandidate","line":588,"signature":"private static bool IsWeakListMarkerCandidate(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsExplicitWeakListMarker","line":593,"signature":"private static bool IsExplicitWeakListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"IsNumberedListMarker","line":598,"signature":"private static bool IsNumberedListMarker(ReadOnlySpan\u003cchar\u003e text)"},{"access":"private","name":"LogMergeDecision","line":644,"signature":"private static void LogMergeDecision(LineData lineData, string reason)"},{"access":"private","name":"CreateTransData","line":652,"signature":"private static TransData CreateTransData(LineData lineData)"},{"access":"private","name":"IsExplicitTitle","line":663,"signature":"private static bool IsExplicitTitle(LineData lineData)"},{"access":"private","name":"IsContextTitle","line":677,"signature":"private static bool IsContextTitle(LineData lineData, LineData next, bool removeSpaceMode)"},{"access":"private","name":"GetCharacterCount","line":689,"signature":"private static int GetCharacterCount(LineData lineData)"},{"access":"private","name":"SortComponent","line":694,"signature":"private static void SortComponent(List\u003cLineData\u003e component)"},{"access":"private","name":"CompareComponents","line":719,"signature":"private static int CompareComponents(List\u003cLineData\u003e left, List\u003cLineData\u003e right)"},{"access":"private","name":"GetComponentRect","line":734,"signature":"private static Rectangle GetComponentRect(List\u003cLineData\u003e component)"},{"access":"private","name":"AreSpatiallyAdjacent","line":744,"signature":"private static bool AreSpatiallyAdjacent(LineData left, LineData right)"},{"access":"private","name":"GetAxisGap","line":778,"signature":"private static int GetAxisGap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"GetOverlapRatio","line":783,"signature":"private static double GetOverlapRatio(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"Find","line":790,"signature":"private static int Find(int[] parent, int index)"},{"access":"private","name":"Union","line":800,"signature":"private static void Union(int[] parent, int left, int right)"},{"access":"private","name":"UpdateTransRectangles","line":810,"signature":"private void UpdateTransRectangles()"},{"access":"private","name":"InitLineLegacy","line":832,"signature":"private void InitLineLegacy(bool mergeLine, bool removeSpaceMode)"},{"access":"public","name":"ApplyTransResult","line":924,"signature":"public void ApplyTransResult(string transString, SettingManager.TransType transType)"},{"access":"public","name":"GetData","line":959,"signature":"public List\u003cResultData\u003e GetData()"},{"access":"public","name":"GetData","line":968,"signature":"public ResultData GetData(int index)"},{"access":"public","name":"GetFontSize","line":983,"signature":"public static int GetFontSize(LineData data)"},{"access":"private","name":"GetTextType","line":1001,"signature":"private static (bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent) GetTextType(string text)"},{"access":"private","name":"Contains","line":1012,"signature":"private static bool Contains(string text, string target)"},{"access":"public","name":"RecognizeRect","line":1019,"signature":"public static Rectangle RecognizeRect(string text, Rectangle rectangle)"},{"access":"private","name":"CorrectHeight","line":1037,"signature":"private static double CorrectHeight(double height, bool isxHeight, bool hasAcent, bool hasHarfAcent, bool hasDecent)"},{"access":"public","name":"GetIsIntersectsWith","line":1050,"signature":"public static bool GetIsIntersectsWith(LineData beforeData, LineData data, bool mergeLine)"},{"access":"public","name":"ClearData","line":1118,"signature":"public void ClearData()"},{"access":"public","name":"AddData","line":1130,"signature":"public ResultData AddData(OcrResult data, int index, bool snapShot, bool removeSpace)"},{"access":"private","name":"CreateOutwardRectangle","line":1205,"signature":"private static Rectangle CreateOutwardRectangle(double x, double y, double width, double height)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.OneOcr","System","System.Collections.Generic","System.Drawing","System.Linq","System.Windows","Windows.Media.Ocr"]},{"path":"MORT/Manager/OcrManager.cs","lines":441,"updatedUtc":"2023-12-24T07:26:17Z","category":"OCR 조정","intent":"Google OCR 자격 증명과 EasyOCR 준비를 포함해 OCR 엔진별 초기화·사용 가능 상태·호출을 조정한다.","operation":"선택 엔진에 필요한 런타임과 키를 준비하고 캡처 바이트를 전달한 뒤 엔진 결과 모델을 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrManager","OcrMethodType","GoogleOcrInfo","GoogleOcrSetting"],"methods":[{"access":"public","name":"SetPath","line":84,"signature":"public void SetPath(string path)"},{"access":"public","name":"Init","line":90,"signature":"public void Init()"},{"access":"public","name":"AddCount","line":148,"signature":"public void AddCount()"},{"access":"public","name":"ConvertToEasyOcrCode","line":192,"signature":"public string ConvertToEasyOcrCode(int index)"},{"access":"public","name":"Init","line":201,"signature":"public void Init(PythonModouleService pythonModouleService)"},{"access":"public","name":"SetGoogleOcrJsonPath","line":219,"signature":"public void SetGoogleOcrJsonPath(string path)"},{"access":"private","name":"SaveGoogleSetting","line":233,"signature":"private void SaveGoogleSetting()"},{"access":"public","name":"LoadGoogleOcrJson","line":250,"signature":"public void LoadGoogleOcrJson()"},{"access":"public","name":"ProcessGoogleAsync","line":278,"signature":"public async Task\u003cGoogleOcrResult\u003e ProcessGoogleAsync(ImgData imgData)"},{"access":"public","name":"IsPipInstalled","line":322,"signature":"public bool IsPipInstalled() =\u003e _pythonModouleService.IsPipInstalled()"},{"access":"public","name":"PreparePipAsync","line":324,"signature":"public async Task\u003cbool\u003e PreparePipAsync()"},{"access":"public","name":"PrepareEasyOcrAsync","line":330,"signature":"public async Task\u003cbool\u003e PrepareEasyOcrAsync(string code, bool enableGpu, string gpuCommand = \"…\")"},{"access":"public","name":"CheckAvailableUninstallPython","line":339,"signature":"public bool CheckAvailableUninstallPython()"},{"access":"public","name":"CheckEasyOcrinstallationIsRequired","line":344,"signature":"public bool CheckEasyOcrinstallationIsRequired()"},{"access":"public","name":"ProcessEasyOcr","line":366,"signature":"public EasyOcrResultModel ProcessEasyOcr(byte[] byteData, int channel, int width, int height) =\u003e _easyOcr.ProcessOcr(byteData, channel, width, height)"},{"access":"public","name":"BitmapFromBytes","line":368,"signature":"public static Bitmap BitmapFromBytes(byte[] bytes, int width, int height, int channels, PixelFormat bmpFormat)"}],"dependencies":["CloudVision","MORT.Model.OCR","MORT.OcrApi.EasyOcr","MORT.Service.PythonService","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Threading.Tasks","System.Xml.Serialization"]},{"path":"MORT/Manager/TransManager.cs","lines":1247,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 조정","intent":"번역 방식 선택, 언어 코드, 사용자 사전, 이전 결과 캐시와 제공자별 API 호출을 하나의 진입점에서 조정한다.","operation":"StartTrans가 입력을 준비하고 GetTransLinesAsync가 TransType별 구현을 호출한 뒤 성공 결과를 캐시에 반영한다.","generated":false,"documentationSource":"automatic","types":["TransManager","TransCodeData","TransData","NaverKeyData","eState"],"methods":[{"access":"public","name":"TempInitalizeInstance","line":63,"signature":"public void TempInitalizeInstance()"},{"access":"public","name":"SetState","line":89,"signature":"public void SetState(NaverKeyData.eState state, string apiType)"},{"access":"public","name":"InitEzTrans","line":141,"signature":"public bool InitEzTrans()"},{"access":"public","name":"InitCustomApi","line":146,"signature":"public void InitCustomApi(string url, string source, string target, string presetName)"},{"access":"public","name":"InitDeeplApiKey","line":151,"signature":"public void InitDeeplApiKey(string apiKey) =\u003e _deeplapiranslateAPI.InitApiKey(apiKey)"},{"access":"public","name":"InitDeepLAPI","line":153,"signature":"public void InitDeepLAPI(string source, string target, SettingManager.DeepLAPIEndpointType endpointType)"},{"access":"public","name":"InitDeepL","line":158,"signature":"public void InitDeepL(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"InitializeGeminiModel","line":163,"signature":"public void InitializeGeminiModel(string model, string apiKey)"},{"access":"public","name":"InitGemini","line":168,"signature":"public void InitGemini(string transCode, string resultCode)"},{"access":"public","name":"InitGeminiCustom","line":173,"signature":"public void InitGeminiCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"public","name":"InitPapagoWeb","line":178,"signature":"public void InitPapagoWeb(string transCode, string resultCode)"},{"access":"public","name":"ShowDeeplWebView","line":183,"signature":"public void ShowDeeplWebView()"},{"access":"public","name":"InitDeepLContract","line":188,"signature":"public void InitDeepLContract(IDeeplAPIContract contract) =\u003e _deepLTranslateAPI.InitContract(contract)"},{"access":"public","name":"LoadUserTranslation","line":190,"signature":"public void LoadUserTranslation(List\u003cstring\u003e files)"},{"access":"public","name":"ClearFormerDic","line":239,"signature":"public void ClearFormerDic()"},{"access":"public","name":"InitFormerDic","line":256,"signature":"public void InitFormerDic()"},{"access":"private","name":"MakeFormerDic","line":272,"signature":"private void MakeFormerDic(Dictionary\u003cSettingManager.TransType, Dictionary\u003cstring, string\u003e\u003e dic)"},{"access":"private","name":"LoadFormerResultFile","line":321,"signature":"private void LoadFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"SaveFormerResultFile","line":332,"signature":"public void SaveFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"RunSaveFormerResultFile","line":340,"signature":"private async Task RunSaveFormerResultFile(SettingManager.TransType transType)"},{"access":"public","name":"ClearFormerResultFile","line":381,"signature":"public void ClearFormerResultFile(SettingManager.TransType transType)"},{"access":"private","name":"GetUserTransResult","line":391,"signature":"private string GetUserTransResult(string ocrText)"},{"access":"private","name":"GetFormerResult","line":425,"signature":"private string GetFormerResult(SettingManager.TransType transType, string ocrValue)"},{"access":"private","name":"AddFormerResult","line":445,"signature":"private void AddFormerResult(SettingManager.TransType transType, string ocrValue, string result)"},{"access":"public","name":"InitGtrans","line":463,"signature":"public void InitGtrans(string sheetID, string clientID, string secretKey, string source, string result)"},{"access":"public","name":"InitGTransToken","line":495,"signature":"public void InitGTransToken()"},{"access":"public","name":"DeleteAllGsTransToken","line":503,"signature":"public void DeleteAllGsTransToken()"},{"access":"public","name":"StartTrans","line":509,"signature":"public async Task\u003cstring\u003e StartTrans(string text, SettingManager.TransType trasType, List\u003cstring\u003e textList = null)"},{"access":"public","name":"StopTrans","line":535,"signature":"public void StopTrans()"},{"access":"private","name":"GetTransLinesAsync","line":542,"signature":"private async Task\u003cstring\u003e GetTransLinesAsync(List\u003cstring\u003e textList, SettingManager.TransType transType)"},{"access":"public","name":"DoGoogleSheetTranslate","line":759,"signature":"public string DoGoogleSheetTranslate(string original, ref bool isError)"},{"access":"public","name":"GetIsRemain","line":789,"signature":"public static bool GetIsRemain()"},{"access":"private","name":"AddTransCode","line":801,"signature":"private void AddTransCode(string key, string title, string ocrCode, string naverCode, string googleCode, string deepLCode, bool customCode = false)"},{"access":"private","name":"InitCustomTransCode","line":813,"signature":"private void InitCustomTransCode()"},{"access":"public","name":"GetTransCodeData","line":850,"signature":"public TransCodeData GetTransCodeData(string ocrCode)"},{"access":"public","name":"SetState","line":991,"signature":"public void SetState(NaverKeyData.eState state)"},{"access":"public","name":"GetNextNaverKey","line":1005,"signature":"public NaverKeyData GetNextNaverKey()"},{"access":"public","name":"SortNaverKeyList","line":1027,"signature":"public List\u003cNaverKeyData\u003e SortNaverKeyList()"},{"access":"public","name":"OpenNaverKeyFile","line":1073,"signature":"public void OpenNaverKeyFile()"},{"access":"public","name":"SaveNaverKeyFile","line":1155,"signature":"public void SaveNaverKeyFile(string id, string secret, bool isPaid = true)"},{"access":"public","name":"GetNaverKey","line":1222,"signature":"public NaverKeyData GetNaverKey()"},{"access":"public","name":"Dispose","line":1238,"signature":"public void Dispose()"}],"dependencies":["MORT.TransAPI","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Transactions"]},{"path":"MORT/Model/BackupOcrAreaModel.cs","lines":30,"updatedUtc":"2024-12-22T09:17:11Z","category":"데이터 모델","intent":"BackupOcrAreaModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["BackupOcrAreaModel"],"methods":[],"dependencies":["System.Collections.Generic"]},{"path":"MORT/Model/CustomApi/CustomApiModel.cs","lines":19,"updatedUtc":"2026-05-17T15:36:22Z","category":"데이터 모델","intent":"CustomApiModel, CustomApiPresetListModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["CustomApiModel","CustomApiPresetListModel"],"methods":[{"access":"public","name":"CustomApiModel","line":11,"signature":"public record CustomApiModel(string Name, string Url, string Information, string Request, string Response, List\u003cstring\u003e Headers)"}],"dependencies":["Newtonsoft.Json","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/Debug/OcrDebugSnapshotModel.cs","lines":181,"updatedUtc":"2026-08-04T09:17:51Z","category":"데이터 모델","intent":"OcrDebugRect, OcrDebugWord, OcrDebugLine, OcrDebugTransBlock, OcrDebugAutoColor, OcrDebugArea, OcrDebugOverlayBlock, OcrDebugPaintTiming, OcrDebugOverlayInfo, OcrDebugSnapshotModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["OcrDebugRect","OcrDebugWord","OcrDebugLine","OcrDebugTransBlock","OcrDebugAutoColor","OcrDebugArea","OcrDebugOverlayBlock","OcrDebugPaintTiming","OcrDebugOverlayInfo","OcrDebugSnapshotModel"],"methods":[{"access":"public","name":"From","line":18,"signature":"public static OcrDebugRect From(Rectangle rect)"}],"dependencies":["System.Collections.Generic","System.Drawing"]},{"path":"MORT/Model/OCR/EasyOcrResultModel.cs","lines":71,"updatedUtc":"2024-02-03T07:57:17Z","category":"데이터 모델","intent":"EasyOcrResultModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["EasyOcrResultModel"],"methods":[],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Model/TranslateMemoryModel.cs","lines":16,"updatedUtc":"2024-09-29T02:55:39Z","category":"데이터 모델","intent":"TranslateMemoryModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateMemoryModel"],"methods":[],"dependencies":["System"]},{"path":"MORT/Model/TranslateType/TranslateTypeModel.cs","lines":5,"updatedUtc":"2026-05-04T13:03:18Z","category":"데이터 모델","intent":"TranslateTypeModel 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslateTypeModel"],"methods":[{"access":"public","name":"TranslateTypeModel","line":4,"signature":"public record TranslateTypeModel(int Index, string Key, string DisplayTitle, SettingManager.TransType TransType)"}],"dependencies":["System"]},{"path":"MORT/Model/TranslationProcessInitializationResult.cs","lines":8,"updatedUtc":"2026-08-02T08:48:46Z","category":"데이터 모델","intent":"TranslationProcessInitializationResult 데이터의 필드와 전달 계약을 정의해 서비스·매니저·UI 사이에서 같은 의미를 공유한다.","operation":"행동보다 데이터 보존이 중심이며 생성자·record 값 또는 속성으로 입력을 받아 소비자가 읽는다.","generated":false,"documentationSource":"automatic","types":["TranslationProcessInitializationResult"],"methods":[],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.cs","lines":12,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 인터페이스","intent":"NaverKeyEditor 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 연결된 partial 파일 또는 선언 소비자 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[],"dependencies":["System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyEditorUI.Designer.cs","lines":39,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"NaverKeyEditor 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyEditor"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.cs","lines":326,"updatedUtc":"2025-12-01T14:55:49Z","category":"사용자 인터페이스","intent":"NaverKeyListUI 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, RenderList, CheckButtonState, NaverKeyListUI_FormClosing, OnClick_Add, OnClick_Remove, listBox_NaverKey_SelectedValueChanged, TextBox_NaverSecret_TextChanged 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"public","name":"Init","line":16,"signature":"public void Init(Action callback)"},{"access":"private","name":"RenderList","line":34,"signature":"private void RenderList()"},{"access":"private","name":"CheckButtonState","line":62,"signature":"private void CheckButtonState()"},{"access":"private","name":"NaverKeyListUI_FormClosing","line":120,"signature":"private void NaverKeyListUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClick_Add","line":159,"signature":"private void OnClick_Add(object sender, EventArgs e)"},{"access":"private","name":"OnClick_Remove","line":271,"signature":"private void OnClick_Remove(object sender, EventArgs e)"},{"access":"private","name":"listBox_NaverKey_SelectedValueChanged","line":304,"signature":"private void listBox_NaverKey_SelectedValueChanged(object sender, EventArgs e)"},{"access":"private","name":"TextBox_NaverSecret_TextChanged","line":318,"signature":"private void TextBox_NaverSecret_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/NaverKeyEditor/NaverKeyListUI.Designer.cs","lines":199,"updatedUtc":"2025-12-01T14:55:49Z","category":"WinForms UI 선언","intent":"NaverKeyListUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["NaverKeyListUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/OcrApi/EasyOcr/EasyOcr.cs","lines":287,"updatedUtc":"2024-09-29T02:55:39Z","category":"OCR 엔진 어댑터","intent":"EasyOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 IsInstalled, UnloadMoudle, TryInstallAsync, TryInitAsync, InintModoule, ProcessOcr 이다.","generated":false,"documentationSource":"automatic","types":["EasyOcr"],"methods":[{"access":"public","name":"IsInstalled","line":43,"signature":"public bool IsInstalled()"},{"access":"public","name":"UnloadMoudle","line":49,"signature":"public void UnloadMoudle()"},{"access":"public","name":"TryInstallAsync","line":64,"signature":"public async Task TryInstallAsync(bool enableGPU, string gpuCommand = \"…\")"},{"access":"public","name":"TryInitAsync","line":101,"signature":"public async Task TryInitAsync(string code)"},{"access":"private","name":"InintModoule","line":125,"signature":"private bool InintModoule()"},{"access":"public","name":"ProcessOcr","line":154,"signature":"public EasyOcrResultModel ProcessOcr(byte[] byteData, int channel, int width, int height)"}],"dependencies":["Google.Rpc","MORT.Model.OCR","MORT.Service.PythonService","Python.Runtime","System","System.Collections.Generic","System.Drawing","System.Drawing.Imaging","System.Globalization","System.IO","System.Runtime.InteropServices","System.Threading.Tasks"]},{"path":"MORT/OcrApi/OneOcr/NativeMethods.cs","lines":79,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"NativeMethods OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 CreateOcrInitOptions, GetOcrLineCount, GetOcrLine, GetOcrLineContent, GetOcrLineBoundingBox, GetOcrLineWordCount, GetOcrWord, GetOcrWordContent 이다.","generated":false,"documentationSource":"automatic","types":["NativeMethods"],"methods":[{"access":"public","name":"CreateOcrInitOptions","line":33,"signature":"public static extern long CreateOcrInitOptions(out long ctx)"},{"access":"public","name":"GetOcrLineCount","line":36,"signature":"public static extern long GetOcrLineCount(long instance, out long count)"},{"access":"public","name":"GetOcrLine","line":39,"signature":"public static extern long GetOcrLine(long instance, long index, out long line)"},{"access":"public","name":"GetOcrLineContent","line":42,"signature":"public static extern long GetOcrLineContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrLineBoundingBox","line":45,"signature":"public static extern long GetOcrLineBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"GetOcrLineWordCount","line":48,"signature":"public static extern long GetOcrLineWordCount(long instance, out long count)"},{"access":"public","name":"GetOcrWord","line":51,"signature":"public static extern long GetOcrWord(long instance, long index, out long line)"},{"access":"public","name":"GetOcrWordContent","line":54,"signature":"public static extern long GetOcrWordContent(long line, out IntPtr content)"},{"access":"public","name":"GetOcrWordBoundingBox","line":57,"signature":"public static extern long GetOcrWordBoundingBox(long line, out IntPtr boundingBoxPtr)"},{"access":"public","name":"OcrProcessOptionsSetMaxRecognitionLineCount","line":60,"signature":"public static extern long OcrProcessOptionsSetMaxRecognitionLineCount(long opt, long count)"},{"access":"public","name":"RunOcrPipeline","line":63,"signature":"public static extern long RunOcrPipeline(long pipeline, ref Img img, long opt, out long instance)"},{"access":"public","name":"CreateOcrProcessOptions","line":66,"signature":"public static extern long CreateOcrProcessOptions(out long opt)"},{"access":"public","name":"OcrInitOptionsSetUseModelDelayLoad","line":69,"signature":"public static extern long OcrInitOptionsSetUseModelDelayLoad(long ctx, byte flag)"},{"access":"public","name":"CreateOcrPipeline","line":72,"signature":"public static extern long CreateOcrPipeline(string modelPath,string key,long ctx,out long pipeline)"},{"access":"public","name":"CreateOcrPipeline_Utf16","line":75,"signature":"public static extern long CreateOcrPipeline_Utf16(string modelPath, string key, long ctx, out long pipeline)"}],"dependencies":["System","System.Runtime.CompilerServices","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/OcrApi/OneOcr/OneOcr.cs","lines":674,"updatedUtc":"2026-05-04T13:03:18Z","category":"OCR 엔진 어댑터","intent":"OneOcr, Word, Line OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 SetDefaultDllDirectories, AddDllDirectory, RemoveDllDirectory, SetDllDirectory, CopyDll, InitalizeAsync, TryCreateOcrPipelineWithFallback, GetInstallLocation 이다.","generated":false,"documentationSource":"automatic","types":["OneOcr","Word","Line"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":41,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":44,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":47,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":50,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"public","name":"CopyDll","line":51,"signature":"public void CopyDll(string path)"},{"access":"public","name":"InitalizeAsync","line":68,"signature":"public async ValueTask InitalizeAsync()"},{"access":"private","name":"TryCreateOcrPipelineWithFallback","line":155,"signature":"private bool TryCreateOcrPipelineWithFallback(string modelPath, string key, long ctx, out long pipeline, out string details)"},{"access":"private","name":"GetInstallLocation","line":233,"signature":"private static async ValueTask\u003cstring?\u003e GetInstallLocation(string appName)"},{"access":"private","name":"RunOcr","line":259,"signature":"private Line[] RunOcr(Img img)"},{"access":"private","name":"PtrToManagedString","line":415,"signature":"private string PtrToManagedString(IntPtr ptr)"},{"access":"public","name":"ConvertToTextAsync","line":514,"signature":"public async ValueTask\u003cLine[]\u003e ConvertToTextAsync(byte[] byteData, int channel, int width, int height, Action clearBitmapCallback)"},{"access":"private","name":"AdjustLines","line":575,"signature":"private Line[] AdjustLines(Line[] lines)"},{"access":"private","name":"IsVerticalLine","line":620,"signature":"private static bool IsVerticalLine(Line l, float ratioThreshold)"},{"access":"public","name":"ToString","line":667,"signature":"public override string ToString()"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.Drawing.Imaging","System.IO","System.Linq","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"MORT/OcrApi/WindowOcr/WindowOcr.cs","lines":508,"updatedUtc":"2025-10-06T02:03:49Z","category":"OCR 엔진 어댑터","intent":"IMemoryBufferByteAccess, ProcessType, WindowOcr OCR 엔진의 네이티브·플랫폼 API 초기화, 이미지 변환, 인식 결과 추출을 담당한다.","operation":"엔진 런타임을 준비하고 픽셀 데이터를 요구 형식으로 변환한 뒤 텍스트와 바운딩 정보를 반환한다. 주요 지점은 TextToSpeach, AsyncTextToSpeach, StartMakeBitmap, SetBitMap, LoadImgFromByte, SetBitMapData_Old, SetBitMapData, ClearList 이다.","generated":false,"documentationSource":"automatic","types":["IMemoryBufferByteAccess","ProcessType","WindowOcr"],"methods":[{"access":"public","name":"TextToSpeach","line":43,"signature":"public void TextToSpeach(string text, int type)"},{"access":"private","name":"AsyncTextToSpeach","line":49,"signature":"private async Task AsyncTextToSpeach(string text, int type)"},{"access":"public","name":"StartMakeBitmap","line":80,"signature":"public void StartMakeBitmap()"},{"access":"public","name":"SetBitMap","line":87,"signature":"public void SetBitMap(byte[] dataList, int channels, int x, int y)"},{"access":"public","name":"LoadImgFromByte","line":92,"signature":"public void LoadImgFromByte(byte[] data, int x, int y)"},{"access":"private","name":"SetBitMapData_Old","line":112,"signature":"private void SetBitMapData_Old(List\u003cbyte\u003e r, List\u003cbyte\u003e g, List\u003cbyte\u003e b, int x, int y)"},{"access":"private","name":"SetBitMapData","line":120,"signature":"private void SetBitMapData(byte[] data, int channels, int x, int y)"},{"access":"public","name":"ClearList","line":128,"signature":"public void ClearList(List\u003cbyte\u003e lista)"},{"access":"public","name":"DoMakeBitmap","line":141,"signature":"public void DoMakeBitmap()"},{"access":"public","name":"LoadBitMapFromData","line":238,"signature":"public void LoadBitMapFromData(byte[] byteData, int x, int y)"},{"access":"public","name":"ProcessOCR","line":279,"signature":"public string ProcessOCR()"},{"access":"public","name":"GetIsAvailable","line":287,"signature":"public bool GetIsAvailable()"},{"access":"public","name":"GetAvailableLanguageList","line":298,"signature":"public List\u003c(string Code, string DisplayName)\u003e GetAvailableLanguageList()"},{"access":"public","name":"InitOcr","line":313,"signature":"public void InitOcr(string code)"},{"access":"public","name":"GetIsAvailableDLL","line":339,"signature":"public bool GetIsAvailableDLL()"},{"access":"private","name":"OCR","line":345,"signature":"private async void OCR()"},{"access":"public","name":"MakeResultData","line":385,"signature":"public WinOCRResultData MakeResultData()"},{"access":"public","name":"GetText","line":455,"signature":"public string GetText()"},{"access":"public","name":"Test","line":460,"signature":"public string Test(byte[] test)"},{"access":"public","name":"TestMat","line":467,"signature":"public string TestMat(byte[] data)"},{"access":"private","name":"LoadImage","line":472,"signature":"private async Task LoadImage(StorageFile file)"},{"access":"private","name":"SaveImageAsync","line":487,"signature":"private async Task SaveImageAsync(string filename)"},{"access":"private","name":"LoadSampleImage","line":502,"signature":"private async Task LoadSampleImage()"}],"dependencies":["System","System.Collections.Generic","WinRT","System.Threading.Tasks","Windows.Media.Ocr","Windows.Graphics.Imaging","Windows.Storage","Windows.Globalization","System.Runtime.InteropServices","Windows.Media.SpeechSynthesis","Windows.Media.Playback","Windows.Media.Core"]},{"path":"MORT/OcrAreaForm.cs","lines":545,"updatedUtc":"2026-08-02T08:41:08Z","category":"사용자 인터페이스","intent":"OcrAreaForm, dragMode 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 SetVisible, Init, SetTitleLabel, ReSetTitleLabel, panealBorder_Paint, titleLabel_Paint, panealBorder_MouseDown, panealBorder_MouseMove 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["OcrAreaForm","dragMode"],"methods":[{"access":"public","name":"SetVisible","line":25,"signature":"public void SetVisible(bool isVisible)"},{"access":"private","name":"Init","line":78,"signature":"private void Init()"},{"access":"public","name":"SetTitleLabel","line":115,"signature":"public void SetTitleLabel()"},{"access":"public","name":"ReSetTitleLabel","line":144,"signature":"public void ReSetTitleLabel(int closeIndex)"},{"access":"private","name":"panealBorder_Paint","line":152,"signature":"private void panealBorder_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"titleLabel_Paint","line":180,"signature":"private void titleLabel_Paint(object sender, PaintEventArgs e)"},{"access":"private","name":"panealBorder_MouseDown","line":190,"signature":"private void panealBorder_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseMove","line":236,"signature":"private void panealBorder_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"panealBorder_MouseUp","line":358,"signature":"private void panealBorder_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"CheckFormLocation","line":363,"signature":"public void CheckFormLocation()"},{"access":"private","name":"BrodcastUpdateOcrArea","line":402,"signature":"private void BrodcastUpdateOcrArea()"},{"access":"private","name":"OcrAreaForm_Resize","line":422,"signature":"private void OcrAreaForm_Resize(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseMove","line":434,"signature":"private void titleLabel_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"titleLabel_MouseDown","line":452,"signature":"private void titleLabel_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"exit_button_Click","line":457,"signature":"private void exit_button_Click(object sender, EventArgs e)"},{"access":"private","name":"panel1_MouseLeave","line":462,"signature":"private void panel1_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"titleLabel_MouseUp","line":467,"signature":"private void titleLabel_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"OcrAreaForm_FormClosed","line":472,"signature":"private void OcrAreaForm_FormClosed(object sender, FormClosedEventArgs e)"},{"access":"public","name":"ShowColorPicker","line":500,"signature":"public void ShowColorPicker(bool isShowResult, bool isUseRgb, bool isUseHSv, bool isUseThreshold, ColorGroup colorGroup, int threshold)"},{"access":"private","name":"OcrAreaForm_Move","line":525,"signature":"private void OcrAreaForm_Move(object sender, EventArgs e)"},{"access":"private","name":"color_picker_button_Click","line":531,"signature":"private void color_picker_button_Click(object sender, EventArgs e)"},{"access":"private","name":"color_group_button_Click","line":536,"signature":"private void color_group_button_Click(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/OcrAreaForm.Designer.cs","lines":141,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"OcrAreaForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["OcrAreaForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/PipeServer/PipeServer.cs","lines":248,"updatedUtc":"2025-03-16T06:03:29Z","category":"EzTrans IPC 서버","intent":"메인 x64 프로세스와 EzTrans를 호출하는 별도 클라이언트 사이의 Named Pipe 요청·응답과 프로세스 수명을 관리한다.","operation":"PipeClient 프로세스를 시작하고 서버 파이프 연결을 기다린 뒤 번역 문자열을 전송하고 응답을 읽으며 연결 오류 시 상태를 정리한다.","generated":false,"documentationSource":"manual","types":["PipeServer","StreamString"],"methods":[{"access":"public","name":"InitPipe","line":25,"signature":"public bool InitPipe()"},{"access":"public","name":"Close","line":69,"signature":"public void Close()"},{"access":"private","name":"OnExited","line":78,"signature":"private void OnExited(object sender, EventArgs e)"},{"access":"private","name":"CheckInit","line":85,"signature":"private bool CheckInit()"},{"access":"public","name":"DoTransAsync","line":102,"signature":"public async Task\u003cstring\u003e DoTransAsync(string ocr)"},{"access":"private","name":"ServerThread","line":121,"signature":"private  void ServerThread(object data)"},{"access":"public","name":"ReadString","line":218,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":230,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Diagnostics","System.IO","System.IO.Pipes","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"MORT/Program.cs","lines":253,"updatedUtc":"2026-08-04T03:58:28Z","category":"애플리케이션 시작","intent":"프로세스 중복 실행, 업데이트 잔여 파일, DI 컨테이너와 메인 메시지 루프를 초기화하는 실행 진입점이다.","operation":"Main이 실행 조건을 검사하고 ConfigureServices로 Singleton 서비스를 조립한 뒤 Form1을 실행한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[{"access":"private","name":"SetDefaultDllDirectories","line":22,"signature":"private static extern bool SetDefaultDllDirectories(uint directoryFlags)"},{"access":"private","name":"AddDllDirectory","line":25,"signature":"private static extern IntPtr AddDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string newDirectory)"},{"access":"private","name":"RemoveDllDirectory","line":28,"signature":"private static extern bool RemoveDllDirectory(IntPtr cookie)"},{"access":"private","name":"SetDllDirectory","line":31,"signature":"private static extern bool SetDllDirectory([MarshalAs(UnmanagedType.LPWStr)] string lpPathName)"},{"access":"internal","name":"SetProcessDPIAware","line":41,"signature":"internal static extern bool SetProcessDPIAware()"},{"access":"public","name":"RunMort","line":171,"signature":"public static void RunMort()"},{"access":"private","name":"ConfigureServices","line":233,"signature":"private static void ConfigureServices(IServiceCollection services)"}],"dependencies":["Microsoft.Extensions.DependencyInjection","MORT.Service.CustomApi","MORT.Service.Gemini","MORT.Service.MouseFollowOcrArea","MORT.Service.TranslateTyp","MORT.TransAPI","System","System.Diagnostics","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Properties/Resources.Designer.cs","lines":381,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"Resources 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Resources"],"methods":[],"dependencies":["System"]},{"path":"MORT/Properties/Settings.Designer.cs","lines":146,"updatedUtc":"2026-08-04T10:21:48Z","category":"WinForms UI 선언","intent":"Settings 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Settings"],"methods":[],"dependencies":[]},{"path":"MORT/QuickSetting/UIQuickSetting.cs","lines":275,"updatedUtc":"2025-12-01T14:55:49Z","category":"빠른 설정 UI","intent":"번역 중 자주 바꾸는 OCR 언어와 표시 옵션을 메인 옵션 창 없이 즉시 변경한다.","operation":"현재 언어별 설정을 간단한 컨트롤에 표시하고 변경 즉시 SettingManager와 관련 OCR 초기화 흐름에 반영한다.","generated":false,"documentationSource":"manual","types":["UIQuickSetting","StepType"],"methods":[{"access":"public","name":"LocalizeForm","line":29,"signature":"public void LocalizeForm()"},{"access":"public","name":"Show","line":45,"signature":"public void Show(OcrLanguageType language)"},{"access":"private","name":"SetFontColor","line":61,"signature":"private void SetFontColor()"},{"access":"private","name":"SetTranslatorType","line":78,"signature":"private void SetTranslatorType()"},{"access":"private","name":"SetOcrType","line":106,"signature":"private void SetOcrType()"},{"access":"private","name":"SetSetting","line":125,"signature":"private void SetSetting()"},{"access":"private","name":"DisableAll","line":147,"signature":"private void DisableAll()"},{"access":"private","name":"ShowSetFont","line":158,"signature":"private void ShowSetFont()"},{"access":"private","name":"ShowSetOCR","line":170,"signature":"private void ShowSetOCR()"},{"access":"private","name":"DoOcrArea","line":183,"signature":"private void DoOcrArea()"},{"access":"private","name":"ShowOcrComplete","line":191,"signature":"private void ShowOcrComplete()"},{"access":"private","name":"ShowFinal","line":207,"signature":"private void ShowFinal()"},{"access":"private","name":"btNext_Click","line":218,"signature":"private void btNext_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowTrnaslate_Click","line":244,"signature":"private void btShowTrnaslate_Click(object sender, EventArgs e)"},{"access":"private","name":"btShowBasic_Click","line":254,"signature":"private void btShowBasic_Click(object sender, EventArgs e)"},{"access":"private","name":"UIQuickSetting_FormClosing","line":263,"signature":"private void UIQuickSetting_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Windows.Forms","MORT.LocalizeManager"]},{"path":"MORT/QuickSetting/UIQuickSetting.Designer.cs","lines":307,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"UIQuickSetting 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIQuickSetting"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Rtt.cs","lines":456,"updatedUtc":"2026-05-19T13:44:18Z","category":"사용자 인터페이스","intent":"RTT 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 OnLoad, ApplyTopMost, AttachEdgeForwarders, HitTestResizeZone, CaptureBaseLayout, OnResize, ApplyScaleToChildren, WndProc 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"OnLoad","line":39,"signature":"protected override void OnLoad(EventArgs e)"},{"access":"public","name":"ApplyTopMost","line":46,"signature":"public void ApplyTopMost(bool topMost)"},{"access":"private","name":"AttachEdgeForwarders","line":51,"signature":"private void AttachEdgeForwarders()"},{"access":"private","name":"HitTestResizeZone","line":64,"signature":"private int HitTestResizeZone(Point clientPoint)"},{"access":"private","name":"CaptureBaseLayout","line":123,"signature":"private void CaptureBaseLayout()"},{"access":"protected","name":"OnResize","line":138,"signature":"protected override void OnResize(EventArgs e)"},{"access":"private","name":"ApplyScaleToChildren","line":144,"signature":"private void ApplyScaleToChildren()"},{"access":"protected","name":"WndProc","line":197,"signature":"protected override void WndProc(ref Message m)"},{"access":"public","name":"ToggleStartButton","line":277,"signature":"public void ToggleStartButton(bool isStart)"},{"access":"private","name":"mouseDragClick","line":296,"signature":"private void mouseDragClick(MouseEventArgs e)"},{"access":"private","name":"mouseDragMove","line":302,"signature":"private void mouseDragMove(MouseEventArgs e)"},{"access":"private","name":"settingButton_Click","line":311,"signature":"private void settingButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeApplication","line":320,"signature":"private void closeApplication()"},{"access":"private","name":"closeButton_Click","line":326,"signature":"private void closeButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_MouseDown","line":332,"signature":"private void RTT_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"RTT_MouseMove","line":337,"signature":"private void RTT_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseDown","line":342,"signature":"private void setCaptureAreaButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseLeave","line":349,"signature":"private void setCaptureAreaButton_MouseLeave(object sender, EventArgs e)"},{"access":"private","name":"setCaptureAreaButton_MouseUp","line":354,"signature":"private void setCaptureAreaButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseUp","line":360,"signature":"private void setSnapShotButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setSnapShotButton_MouseDown","line":366,"signature":"private void setSnapShotButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseDown","line":372,"signature":"private void startTransButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"startTransButton_MouseUp","line":378,"signature":"private void startTransButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseDown","line":384,"signature":"private void stopButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"stopButton_MouseUp","line":390,"signature":"private void stopButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"setCaptureAreaButton_Click","line":396,"signature":"private void setCaptureAreaButton_Click(object sender, EventArgs e)"},{"access":"private","name":"startTransButton_Click","line":404,"signature":"private void startTransButton_Click(object sender, EventArgs e)"},{"access":"private","name":"stopButton_Click","line":413,"signature":"private void stopButton_Click(object sender, EventArgs e)"},{"access":"private","name":"RTT_FormClosing","line":421,"signature":"private void RTT_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"snapButton_Click","line":427,"signature":"private void snapButton_Click(object sender, EventArgs e)"},{"access":"private","name":"closeButton_MouseDown","line":435,"signature":"private void closeButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"closeButton_MouseUp","line":440,"signature":"private void closeButton_MouseUp(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseDown","line":445,"signature":"private void settingButton_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"settingButton_MouseUp","line":450,"signature":"private void settingButton_MouseUp(object sender, MouseEventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/Rtt.Designer.cs","lines":181,"updatedUtc":"2026-05-19T13:44:18Z","category":"WinForms UI 선언","intent":"RTT 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["RTT"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/ScreenCapture/CompositionHelper.cs","lines":72,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CompositionHelper, ICompositorInterop, ICompositorDesktopInterop 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDesktopWindowTarget, CreateCompositionSurfaceForSwapChain 이다.","generated":false,"documentationSource":"automatic","types":["CompositionHelper","ICompositorInterop","ICompositorDesktopInterop"],"methods":[{"access":"public","name":"CreateDesktopWindowTarget","line":59,"signature":"public static CompositionTarget CreateDesktopWindowTarget(this Compositor compositor, IntPtr hwnd, bool isTopmost)"},{"access":"public","name":"CreateCompositionSurfaceForSwapChain","line":65,"signature":"public static ICompositionSurface CreateCompositionSurfaceForSwapChain(this Compositor compositor, SharpDX.DXGI.SwapChain1 swapChain)"}],"dependencies":["System","System.Runtime.InteropServices","Windows.UI.Composition"]},{"path":"MORT/ScreenCapture/CoreMessagingHelper.cs","lines":83,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"CoreMessagingHelper, DISPATCHERQUEUE_THREAD_APARTMENTTYPE, DISPATCHERQUEUE_THREAD_TYPE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDispatcherQueueControllerForCurrentThread 이다.","generated":false,"documentationSource":"automatic","types":["CoreMessagingHelper","DISPATCHERQUEUE_THREAD_APARTMENTTYPE","DISPATCHERQUEUE_THREAD_TYPE"],"methods":[{"access":"public","name":"CreateDispatcherQueueControllerForCurrentThread","line":62,"signature":"public static DispatcherQueueController CreateDispatcherQueueControllerForCurrentThread()"}],"dependencies":["System","System.Runtime.InteropServices","Windows.System"]},{"path":"MORT/ScreenCapture/Direct3D11Helper.cs","lines":197,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"IDirect3DDxgiInterfaceAccess, Direct3D11Helper 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 CreateDirect3D11DeviceFromDXGIDevice, CreateDirect3D11SurfaceFromDXGISurface, CreateDevice, CreateDirect3DSurfaceFromSharpDXTexture, CreateSharpDXDevice, CreateDirect3DDeviceFromSharpDXDevice, CreateSharpDXTexture2D, CreateTexture2DFrombytes 이다.","generated":false,"documentationSource":"automatic","types":["IDirect3DDxgiInterfaceAccess","Direct3D11Helper"],"methods":[{"access":"internal","name":"CreateDirect3D11DeviceFromDXGIDevice","line":60,"signature":"internal static extern UInt32 CreateDirect3D11DeviceFromDXGIDevice(IntPtr dxgiDevice, out IntPtr graphicsDevice)"},{"access":"internal","name":"CreateDirect3D11SurfaceFromDXGISurface","line":70,"signature":"internal static extern UInt32 CreateDirect3D11SurfaceFromDXGISurface(IntPtr dxgiSurface, out IntPtr graphicsSurface)"},{"access":"public","name":"CreateDevice","line":71,"signature":"public static IDirect3DDevice CreateDevice()"},{"access":"public","name":"CreateDevice","line":76,"signature":"public static IDirect3DDevice CreateDevice(bool useWARP)"},{"access":"public","name":"CreateDirect3DSurfaceFromSharpDXTexture","line":101,"signature":"public static IDirect3DSurface CreateDirect3DSurfaceFromSharpDXTexture(SharpDX.Direct3D11.Texture2D texture)"},{"access":"public","name":"CreateSharpDXDevice","line":122,"signature":"public static SharpDX.Direct3D11.Device CreateSharpDXDevice(IDirect3DDevice device)"},{"access":"public","name":"CreateDirect3DDeviceFromSharpDXDevice","line":129,"signature":"public static IDirect3DDevice CreateDirect3DDeviceFromSharpDXDevice(SharpDX.Direct3D11.Device sharpDxDevice)"},{"access":"public","name":"CreateSharpDXTexture2D","line":137,"signature":"public static SharpDX.Direct3D11.Texture2D CreateSharpDXTexture2D(IDirect3DSurface surface)"},{"access":"public","name":"CreateTexture2DFrombytes","line":145,"signature":"public static SharpDX.Direct3D11.Texture2D CreateTexture2DFrombytes(Device device, byte[] RawData, int width, int height)"},{"access":"public","name":"InitializeComposeTexture","line":165,"signature":"public static SharpDX.Direct3D11.Texture2D InitializeComposeTexture(SharpDX.Direct3D11.Device sharpDxD3dDevice, SizeInt32 size)"}],"dependencies":["SharpDX.Direct3D11","SharpDX","System","System.Runtime.InteropServices","Windows.Graphics","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/PopupScreenCapture.xaml.cs","lines":270,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"PopupScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 PrepareCaptureAsync, Localize, Start, StopCapture, DoPrepare, DoCapture, GetData, GethWnd 이다.","generated":false,"documentationSource":"automatic","types":["PopupScreenCapture"],"methods":[{"access":"private","name":"PrepareCaptureAsync","line":60,"signature":"private async Task PrepareCaptureAsync()"},{"access":"private","name":"Localize","line":118,"signature":"private void Localize(bool useEnglish)"},{"access":"public","name":"Start","line":135,"signature":"public void Start(Action callback, Action closeCallback, Action stopCallback, bool useEnglish, bool enableYellowBoard)"},{"access":"public","name":"StopCapture","line":146,"signature":"public void StopCapture()"},{"access":"public","name":"DoPrepare","line":157,"signature":"public void DoPrepare()"},{"access":"public","name":"DoCapture","line":162,"signature":"public void DoCapture()"},{"access":"public","name":"GetData","line":166,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"private","name":"GethWnd","line":173,"signature":"private IntPtr GethWnd(string name, Windows.Graphics.SizeInt32 captureSize)"},{"access":"private","name":"InitComposition","line":224,"signature":"private void InitComposition()"},{"access":"private","name":"Window_Closed","line":232,"signature":"private void Window_Closed(object sender, EventArgs e)"},{"access":"private","name":"btAttach_Click","line":248,"signature":"private void btAttach_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"btStop_Click","line":253,"signature":"private void btStop_Click(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Loaded_1","line":258,"signature":"private void Window_Loaded_1(object sender, RoutedEventArgs e)"},{"access":"private","name":"Window_Closed_1","line":264,"signature":"private void Window_Closed_1(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks","System.Windows","System.Windows.Controls","System.Windows.Data","System.Windows.Documents","System.Windows.Input","System.Windows.Interop","System.Windows.Media","System.Windows.Media.Imaging","System.Windows.Navigation","System.Windows.Shapes","Windows.Graphics.Capture","Windows.UI.Composition","System.Numerics","System.Diagnostics","System.Collections.ObjectModel","Windows.ApplicationModel.Core","Windows.UI.Core","System.Windows.Threading"]},{"path":"MORT/ScreenCapture/ScreenCapture.cs","lines":80,"updatedUtc":"2025-12-01T14:55:49Z","category":"화면 캡처","intent":"ScreenCapture 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 Dispose, StartCaptureFromItem, PrepareStart, StartDataCapture, GetData, StopCapture 이다.","generated":false,"documentationSource":"automatic","types":["ScreenCapture"],"methods":[{"access":"public","name":"Dispose","line":21,"signature":"public void Dispose()"},{"access":"public","name":"StartCaptureFromItem","line":28,"signature":"public void StartCaptureFromItem(GraphicsCaptureItem item, IntPtr hWnd, bool enableYellowBoard, out BorderStateType borderStateType)"},{"access":"public","name":"PrepareStart","line":39,"signature":"public void PrepareStart()"},{"access":"public","name":"StartDataCapture","line":49,"signature":"public void StartDataCapture()"},{"access":"public","name":"GetData","line":54,"signature":"public bool GetData(ref byte[] array, ref int x, ref int y, ref int positionX, ref int positionY)"},{"access":"public","name":"StopCapture","line":74,"signature":"public void StopCapture()"}],"dependencies":["System","Windows.Devices.HumanInterfaceDevice","Windows.Graphics.Capture","Windows.Graphics.DirectX.Direct3D11"]},{"path":"MORT/ScreenCapture/ScreenCaptureProcesser.cs","lines":452,"updatedUtc":"2026-08-02T08:48:46Z","category":"화면 캡처","intent":"BorderStateType, ScreenCaptureProcesser, IBorderRequired 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 GetWindowRect, DwmGetWindowAttribute, TryGetCaptureBounds, SetRequireBoard, Dispose, StartCapture, GetLastData, OnFrameArrived 이다.","generated":false,"documentationSource":"automatic","types":["BorderStateType","ScreenCaptureProcesser","IBorderRequired"],"methods":[{"access":"public","name":"GetWindowRect","line":72,"signature":"public static extern bool GetWindowRect(IntPtr hwnd, ref Rect rectangle)"},{"access":"private","name":"DwmGetWindowAttribute","line":75,"signature":"private static extern int DwmGetWindowAttribute(IntPtr hwnd, int attribute, ref Rect rectangle, int size)"},{"access":"public","name":"TryGetCaptureBounds","line":78,"signature":"public static bool TryGetCaptureBounds(IntPtr hwnd, out Rect rectangle)"},{"access":"public","name":"SetRequireBoard","line":165,"signature":"public void SetRequireBoard(bool enableBoard)"},{"access":"public","name":"Dispose","line":197,"signature":"public void Dispose()"},{"access":"public","name":"StartCapture","line":205,"signature":"public void StartCapture()"},{"access":"public","name":"GetLastData","line":234,"signature":"public void GetLastData(ref int x, ref int y, ref int positionX, ref int positionY, ref byte[] dataArray)"},{"access":"private","name":"OnFrameArrived","line":250,"signature":"private void OnFrameArrived(Direct3D11CaptureFramePool sender, object args)"},{"access":"private","name":"CopyBitmap","line":369,"signature":"private void CopyBitmap(IDirect3DSurface surface, SharpDX.Direct3D11.Texture2D screenTexture2D, int Width, int Height)"}],"dependencies":["SharpDX.Direct3D11","System","Windows.Graphics","Windows.Graphics.Capture","Windows.Graphics.DirectX","Windows.Graphics.DirectX.Direct3D11","SharpDX.DXGI","System.Runtime.InteropServices","System.Threading.Tasks","Windows.Graphics.Imaging","MORT.OcrApi.WindowOcr","System.Security.Cryptography.Xml","WinRT","System.Windows.Media.Media3D","System.Linq"]},{"path":"MORT/ScreenCapture/WindowEnumerationHelper.cs","lines":166,"updatedUtc":"2023-07-13T10:38:58Z","category":"화면 캡처","intent":"WindowEnumerationHelper, GetAncestorFlags, GWL, WindowStyles, DWMWINDOWATTRIBUTE 타입으로 Windows Graphics Capture, Direct3D 상호 운용 또는 캡처 UI의 한 단계를 담당한다.","operation":"대상 창/모니터를 선택하고 프레임을 받아 CPU 바이트와 화면 좌표로 변환한다. 주요 지점은 IsWindowValidForCapture 이다.","generated":false,"documentationSource":"automatic","types":["WindowEnumerationHelper","GetAncestorFlags","GWL","WindowStyles","DWMWINDOWATTRIBUTE"],"methods":[{"access":"public","name":"IsWindowValidForCapture","line":127,"signature":"public static bool IsWindowValidForCapture(IntPtr hwnd)"}],"dependencies":["System","System.Runtime.InteropServices"]},{"path":"MORT/screenForm.cs","lines":425,"updatedUtc":"2026-06-14T03:28:55Z","category":"사용자 인터페이스","intent":"screenForm, ScreenType 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, MakePreview, ShowOcrAreaFormBriefly, mouse_Up, mouse_Click, mouse_Move, DrawSelection, screenForm_Load 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["screenForm","ScreenType"],"methods":[{"access":"public","name":"MakeScreenForm","line":73,"signature":"public static void MakeScreenForm(ScreenType screenType, Action callback = null)"},{"access":"public","name":"MakePreview","line":86,"signature":"public static void MakePreview(Color selectAreaColor, Color backColor)"},{"access":"private","name":"ShowOcrAreaFormBriefly","line":143,"signature":"private static async void ShowOcrAreaFormBriefly(OcrAreaForm ocrAreaForm)"},{"access":"private","name":"mouse_Up","line":230,"signature":"private void mouse_Up(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Click","line":316,"signature":"private void mouse_Click(object sender, MouseEventArgs e)"},{"access":"private","name":"mouse_Move","line":338,"signature":"private void mouse_Move(object sender, MouseEventArgs e)"},{"access":"private","name":"DrawSelection","line":348,"signature":"private void DrawSelection()"},{"access":"private","name":"screenForm_Load","line":412,"signature":"private void screenForm_Load(object sender, EventArgs e)"},{"access":"private","name":"screenForm_FormClosed","line":418,"signature":"private void screenForm_FormClosed(object sender, FormClosedEventArgs e)"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/screenForm.Designer.cs","lines":59,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"screenForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["screenForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SearchOptionForm.cs","lines":114,"updatedUtc":"2024-12-22T09:17:11Z","category":"사용자 인터페이스","intent":"SearchOptionForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 MakeScreenForm, acceptCaptureArea, addButton_Click, AddExceptButton_Click, acceptButton_Click, defaultButton_Click, DestoryForm, LocalizeForm 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"private","name":"MakeScreenForm","line":22,"signature":"private void MakeScreenForm()"},{"access":"public","name":"acceptCaptureArea","line":27,"signature":"public void acceptCaptureArea()"},{"access":"private","name":"addButton_Click","line":40,"signature":"private void addButton_Click(object sender, EventArgs e)"},{"access":"private","name":"AddExceptButton_Click","line":57,"signature":"private void AddExceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"acceptButton_Click","line":74,"signature":"private void acceptButton_Click(object sender, EventArgs e)"},{"access":"private","name":"defaultButton_Click","line":81,"signature":"private void defaultButton_Click(object sender, EventArgs e)"},{"access":"private","name":"DestoryForm","line":88,"signature":"private void DestoryForm(object sender, FormClosingEventArgs e)"},{"access":"public","name":"LocalizeForm","line":104,"signature":"public void LocalizeForm()"}],"dependencies":["MORT.LocalizeManager","System","System.Collections.Generic","System.Windows.Forms"]},{"path":"MORT/SearchOptionForm.Designer.cs","lines":106,"updatedUtc":"2023-07-10T15:57:39Z","category":"WinForms UI 선언","intent":"SearchOptionForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SearchOptionForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Service/CustomApi/CustomApiPresetService.cs","lines":432,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"CustomApiPresetService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 LoadAdditionalFromFiles, SaveAdditionalList, RefreshAdditional, GetAllPresets, FindAdditionalByName, IsFilePreset, LoadFilePresets, SaveFilePreset 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["CustomApiPresetService"],"methods":[{"access":"public","name":"LoadAdditionalFromFiles","line":40,"signature":"public void LoadAdditionalFromFiles()"},{"access":"public","name":"SaveAdditionalList","line":124,"signature":"public void SaveAdditionalList(IEnumerable\u003cCustomApiModel\u003e models)"},{"access":"public","name":"RefreshAdditional","line":164,"signature":"public void RefreshAdditional()"},{"access":"public","name":"GetAllPresets","line":171,"signature":"public IReadOnlyList\u003cCustomApiModel\u003e GetAllPresets()"},{"access":"public","name":"FindAdditionalByName","line":193,"signature":"public CustomApiModel? FindAdditionalByName(string name)"},{"access":"public","name":"IsFilePreset","line":216,"signature":"public bool IsFilePreset(string name)"},{"access":"public","name":"LoadFilePresets","line":229,"signature":"public void LoadFilePresets()"},{"access":"public","name":"SaveFilePreset","line":373,"signature":"public void SaveFilePreset(CustomApiModel model)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Text","Newtonsoft.Json","Newtonsoft.Json.Linq","MORT.Model.CustomApi"]},{"path":"MORT/Service/Debug/OcrDebugSnapshotService.cs","lines":297,"updatedUtc":"2026-08-04T09:17:58Z","category":"비즈니스 서비스","intent":"OcrDebugSnapshotService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Flush, Save, ConvertArea, ConvertTransBlock, ConvertLine, GetAreaRect, ToColorText 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["OcrDebugSnapshotService"],"methods":[{"access":"private","name":"Flush","line":152,"signature":"private void Flush()"},{"access":"private","name":"Save","line":168,"signature":"private void Save(OcrDebugSnapshotModel snapshot)"},{"access":"private","name":"ConvertArea","line":187,"signature":"private static OcrDebugArea ConvertArea(OCRDataManager.ResultData data)"},{"access":"private","name":"ConvertTransBlock","line":226,"signature":"private static OcrDebugTransBlock ConvertTransBlock(OCRDataManager.TransData transData)"},{"access":"private","name":"ConvertLine","line":248,"signature":"private static OcrDebugLine ConvertLine(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetAreaRect","line":273,"signature":"private static Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"public","name":"ToColorText","line":291,"signature":"public static string ToColorText(Color color)"}],"dependencies":["MORT.Model.Debug","Newtonsoft.Json","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Service/Gemini/GeminiConfigMaker.cs","lines":170,"updatedUtc":"2026-08-02T08:52:09Z","category":"비즈니스 서비스","intent":"GeminiConfigMaker 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitalizeModels, CreateRequestBody, CreateCustomRequestBody, CreateThinkingConfigFor2x, CreateThinkingConfigFor3x 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigMaker"],"methods":[{"access":"private","name":"InitalizeModels","line":17,"signature":"private void InitalizeModels()"},{"access":"public","name":"CreateRequestBody","line":28,"signature":"public object CreateRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateCustomRequestBody","line":34,"signature":"public object CreateCustomRequestBody(string modelName, string command, string requestText)"},{"access":"public","name":"CreateRequestBody","line":57,"signature":"public object CreateRequestBody(GeminiConfigModel cfg, string command, string requestText)"},{"access":"private","name":"CreateThinkingConfigFor2x","line":127,"signature":"private object CreateThinkingConfigFor2x(int rawThinking, bool pro)"},{"access":"private","name":"CreateThinkingConfigFor3x","line":148,"signature":"private object CreateThinkingConfigFor3x(int rawThinking, bool pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/Gemini/GeminiConfigModel.cs","lines":18,"updatedUtc":"2026-05-04T13:03:18Z","category":"비즈니스 서비스","intent":"GeminiConfigModel, GeminiVersionType 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GeminiConfigModel 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["GeminiConfigModel","GeminiVersionType"],"methods":[{"access":"public","name":"GeminiConfigModel","line":9,"signature":"public record GeminiConfigModel(GeminiVersionType VersionType, string ModelName, bool Pro)"}],"dependencies":["System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/MouseFollowOcrArea/MouseFollowOcrAreaService.cs","lines":159,"updatedUtc":"2026-08-02T08:41:08Z","category":"비즈니스 서비스","intent":"MouseFollowOcrAreaService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 Initialize, Toggle, SetEnabled, ClearForm, Timer_Tick, GetTarget, Dispose 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["MouseFollowOcrAreaService"],"methods":[{"access":"public","name":"Initialize","line":22,"signature":"public void Initialize(Form1 mainForm)"},{"access":"public","name":"Toggle","line":29,"signature":"public void Toggle()"},{"access":"public","name":"SetEnabled","line":63,"signature":"public void SetEnabled(bool isEnable)"},{"access":"public","name":"ClearForm","line":81,"signature":"public void ClearForm()"},{"access":"private","name":"Timer_Tick","line":88,"signature":"private void Timer_Tick(object sender, EventArgs e)"},{"access":"private","name":"GetTarget","line":117,"signature":"private OcrAreaForm GetTarget()"},{"access":"public","name":"Dispose","line":152,"signature":"public void Dispose()"}],"dependencies":["System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/Overlay/OverlayColorAnalyzer.cs","lines":602,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 자동 색상 분석","intent":"OCR 단어 영역에서 말풍선이나 문서 배경과 원문 글자색을 추출하되 테두리·인접 영역을 배경으로 오인하지 않고 최종 가독성을 보장한다.","operation":"단어 사각형 내부 가장자리와 모서리의 반복 색을 먼저 배경으로 선택하고, 신뢰도가 부족할 때만 SourceRect 주변 1-4픽셀 링과 전체 영역을 순서대로 사용한다. 단어 내부의 대비 후보로 글자색을 고른 뒤 최종 대비가 낮으면 배경은 유지하고 검정 또는 흰색 글자로 보정한다.","generated":false,"documentationSource":"manual","types":["OverlayColorAnalyzer","ForegroundCluster"],"methods":[{"access":"private","name":"GetBackgroundRingRect","line":375,"signature":"private static Rectangle GetBackgroundRingRect(Rectangle wordRect, Rectangle sourceRect, int width, int height)"},{"access":"private","name":"ContainsAny","line":388,"signature":"private static bool ContainsAny(IReadOnlyList\u003cRectangle\u003e rects, int x, int y)"},{"access":"private","name":"GetStride","line":515,"signature":"private static int GetStride(Rectangle rect, int maximumSamples)"},{"access":"private","name":"GetQuantizedKey","line":521,"signature":"private static int GetQuantizedKey(Color color)"},{"access":"private","name":"GetMedian","line":526,"signature":"private static byte GetMedian(List\u003cbyte\u003e values)"},{"access":"private","name":"GetContrastingColor","line":535,"signature":"private static Color GetContrastingColor(Color background)"},{"access":"internal","name":"EnsureReadableFontColor","line":544,"signature":"internal static Color EnsureReadableFontColor(Color font, Color background, out bool corrected)"},{"access":"private","name":"GetContrastRatio","line":550,"signature":"private static double GetContrastRatio(Color first, Color second)"},{"access":"private","name":"GetRelativeLuminance","line":559,"signature":"private static double GetRelativeLuminance(Color color)"},{"access":"private","name":"ToLinear","line":566,"signature":"private static double ToLinear(byte channel)"},{"access":"public","name":"Add","line":587,"signature":"public void Add(Color color, double contrast)"},{"access":"public","name":"GetMedianColor","line":595,"signature":"public Color GetMedianColor()"}],"dependencies":["System","System.Collections.Generic","System.Drawing","System.Linq"]},{"path":"MORT/Service/Overlay/OverlayRenderSynchronizationService.cs","lines":15,"updatedUtc":"2026-08-02T08:48:46Z","category":"오버레이 렌더 동기화","intent":"DWM 합성 대기를 오버레이 구현 세부사항으로 한정해 일반 번역창과 레이어 번역창이 네이티브 DwmFlush 의존성을 갖지 않게 한다.","operation":"TransFormOver.Prepare가 투명 레이어 비트맵을 갱신한 직후 Flush를 호출하면 내부 DwmFlush가 해당 갱신이 데스크톱 합성기에 반영될 때까지 기다린다.","generated":false,"documentationSource":"manual","types":["OverlayRenderSynchronizationService"],"methods":[{"access":"private","name":"DwmFlush","line":8,"signature":"private static extern int DwmFlush()"},{"access":"public","name":"Flush","line":9,"signature":"public static void Flush()"}],"dependencies":["System.Runtime.InteropServices"]},{"path":"MORT/Service/ProcessTranslateService/ProcessTranslateService.cs","lines":1103,"updatedUtc":"2026-08-04T09:28:00Z","category":"OCR 번역 실행 조정","intent":"OCR 엔진 분기, 번역 호출, 결과 반영과 반복 실행을 조정하되 실행 초기화와 이미지 버퍼 생성 구현은 전용 서비스에 위임한다.","operation":"UI와 번역 스레드의 교착을 피하기 위해 작업 스레드 생성 전에 TranslationProcessInitializationService에서 실행 문맥과 번역창 Prepare 결과를 받고, 각 OCR 분기에서는 TranslationImageModelService가 만든 ImgData를 소비한 뒤 번역 결과를 현재 번역창에 반영한다.","generated":false,"documentationSource":"manual","types":["ProcessTranslateService"],"methods":[{"access":"private","name":"LocalizeString","line":75,"signature":"private string LocalizeString(string key, bool replaceLine = false)"},{"access":"private","name":"WaitForCompletion","line":109,"signature":"private void WaitForCompletion(Task task)"},{"access":"private","name":"JoinThread","line":142,"signature":"private bool JoinThread(int timeoutMs)"},{"access":"private","name":"AdjustText","line":158,"signature":"private string AdjustText(string text)"},{"access":"private","name":"MakeFinalOcrAndTrans","line":224,"signature":"private void MakeFinalOcrAndTrans(int index, OCRDataManager.ResultData ocrResultData, List\u003cImgData\u003e imgDataList, string currentOcr, ref string ocrResult, ref string finalTransResult)"},{"access":"private","name":"ScaleSourceRect","line":351,"signature":"private static Rectangle ScaleSourceRect(Rectangle sourceRect, ImgData item)"},{"access":"private","name":"SetClipBoard","line":369,"signature":"private void SetClipBoard(string transText, string result)"},{"access":"public","name":"DoTextToSpeach","line":406,"signature":"public void DoTextToSpeach(string text)"},{"access":"private","name":"DoTrans","line":429,"signature":"private void DoTrans(OcrMethodType ocrMethodType, TranslationProcessInitializationResult initialization)"},{"access":"private","name":"StartTranslationThread","line":956,"signature":"private void StartTranslationThread(OcrMethodType ocrMethodType)"},{"access":"public","name":"CompareStrings","line":971,"signature":"public static void CompareStrings(string a, string b)"},{"access":"private","name":"SaveOcrResult","line":989,"signature":"private void SaveOcrResult(string transText, string ocrText)"},{"access":"public","name":"ProcessTrans","line":1030,"signature":"public void ProcessTrans(OcrMethodType ocrMethodType)"},{"access":"public","name":"StopTranslate","line":1044,"signature":"public void StopTranslate(int joinTimeoutMs = DefaultJoinTimeoutMs)"}],"dependencies":["MORT.Manager","MORT.Model","MORT.OcrApi.OneOcr","MORT.OcrApi.WindowOcr","MORT.Service.Overlay","System","System.Collections","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/ProcessTranslateService/TranslateResultMemoryService.cs","lines":113,"updatedUtc":"2025-12-01T14:55:49Z","category":"OCR·번역 파이프라인","intent":"TranslateResultMemoryService 타입으로 캡처, OCR, 문자열 비교, 번역, 출력 갱신의 실행 흐름과 세션 상태를 담당한다.","operation":"처리 스레드와 취소 상태를 준비한 뒤 영역별 OCR 결과를 만들고 변경된 문장을 번역해 현재 스킨 폼에 전달한다. 주요 지점은 Init, CheckMemoryResult, RemoveExpiredMemory 이다.","generated":false,"documentationSource":"automatic","types":["TranslateResultMemoryService"],"methods":[{"access":"public","name":"Init","line":17,"signature":"public void Init(bool enable, int memoryCount, int remainSecond)"},{"access":"public","name":"CheckMemoryResult","line":24,"signature":"public string CheckMemoryResult(string result)"},{"access":"private","name":"RemoveExpiredMemory","line":87,"signature":"private void RemoveExpiredMemory()"}],"dependencies":["MORT.Model","System","System.Collections.Generic","System.Linq","System.Text","System.Threading.Tasks"]},{"path":"MORT/Service/ProcessTranslateService/TranslationImageModelService.cs","lines":255,"updatedUtc":"2026-08-02T08:48:46Z","category":"OCR 입력 모델 생성","intent":"화면 또는 연결 캡처의 네이티브 픽셀 버퍼를 OCR 엔진이 공통으로 소비하는 영역별 ImgData 목록으로 만든다.","operation":"캡처 성공까지 중단 상태를 확인하고, 각 OCR 영역의 전처리 버퍼와 선택적인 4채널 원본 버퍼를 관리 배열로 복사한 뒤 네이티브 메모리를 해제한다.","generated":false,"documentationSource":"manual","types":["TranslationImageModelService"],"methods":[{"access":"private","name":"CopyImageData","line":172,"signature":"private static ImgData CopyImageData(IntPtr source, int width, int height, int channels, int index)"}],"dependencies":["MORT.Manager","System","System.Collections.Generic","System.Runtime.InteropServices","System.Threading"]},{"path":"MORT/Service/ProcessTranslateService/TranslationProcessInitializationService.cs","lines":125,"updatedUtc":"2026-08-02T08:48:46Z","category":"번역 실행 초기화","intent":"스냅샷과 실시간 번역 요청의 공통 초기 조건과 번역창 준비 순서를 한곳에서 결정한다.","operation":"OCR 영역 경고와 Google OCR 사용 가능 경로, 자동 색상 원본 버퍼 필요 여부를 계산하고 UI 스레드에서 ITransform.Prepare 다음 StartTrans를 동기 호출해 초기화 결과 모델을 반환한다.","generated":false,"documentationSource":"manual","types":["TranslationProcessInitializationService"],"methods":[{"access":"public","name":"Initialize","line":19,"signature":"public TranslationProcessInitializationResult Initialize(OcrMethodType ocrMethodType)"},{"access":"private","name":"PrepareTranslationWindow","line":47,"signature":"private void PrepareTranslationWindow()"},{"access":"private","name":"ApplyOcrAreaWarning","line":71,"signature":"private void ApplyOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"RequiresOcrAreaWarning","line":83,"signature":"private bool RequiresOcrAreaWarning(OcrMethodType ocrMethodType)"},{"access":"private","name":"LocalizeString","line":119,"signature":"private static string LocalizeString(string key)"}],"dependencies":["MORT.Manager","MORT.Model","System","System.Drawing","System.Windows.Forms"]},{"path":"MORT/Service/PythonService/PythonModouleService.cs","lines":109,"updatedUtc":"2025-12-01T14:55:49Z","category":"비즈니스 서비스","intent":"PythonModouleService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 InitAsync, DeletePip, InstallModouleAsync, IsPipInstalled, IsInstalled 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["PythonModouleService"],"methods":[{"access":"public","name":"InitAsync","line":21,"signature":"public async Task InitAsync()"},{"access":"public","name":"DeletePip","line":58,"signature":"public void DeletePip()"},{"access":"public","name":"InstallModouleAsync","line":68,"signature":"public async Task InstallModouleAsync(string modoule, bool force = false)"},{"access":"public","name":"IsPipInstalled","line":78,"signature":"public bool IsPipInstalled()"},{"access":"public","name":"IsInstalled","line":90,"signature":"public bool IsInstalled(string modoule)"}],"dependencies":["Python.Deployment","Python.Runtime","System","System.Collections.Generic","System.IO","System.Linq","System.Text","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/Service/TranslateTyp/TranslateTypListService.cs","lines":179,"updatedUtc":"2026-05-19T13:44:18Z","category":"비즈니스 서비스","intent":"TranslateTypListService 기능을 UI와 API 구현에서 분리해 DI로 재사용할 수 있게 제공한다.","operation":"생성자에서 필요한 협력 객체를 받고 GetTitles, GetModel, Initialize, InitializeCustomApi, GetTransType, GetIndexByTransType 흐름으로 상태를 준비하거나 기능 결과를 반환한다.","generated":false,"documentationSource":"automatic","types":["TranslateTypListService"],"methods":[{"access":"public","name":"GetTitles","line":14,"signature":"public List\u003cstring\u003e GetTitles() =\u003e _modelList.Select(r =\u003e r.DisplayTitle).ToList()"},{"access":"public","name":"GetModel","line":16,"signature":"public TranslateTypeModel GetModel(int index)"},{"access":"public","name":"GetModel","line":24,"signature":"public TranslateTypeModel GetModel(SettingManager.TransType translateType, string subKey)"},{"access":"public","name":"Initialize","line":48,"signature":"public void Initialize()"},{"access":"private","name":"InitializeCustomApi","line":114,"signature":"private void InitializeCustomApi()"},{"access":"public","name":"GetTransType","line":150,"signature":"public SettingManager.TransType GetTransType(int index)"},{"access":"public","name":"GetIndexByTransType","line":152,"signature":"public int GetIndexByTransType(SettingManager.TransType transType)"},{"access":"public","name":"GetIndexByTransType","line":164,"signature":"public int GetIndexByTransType(SettingManager.TransType transType, string subKey)"}],"dependencies":["System","System.Collections.Generic","System.Linq","MORT.Model.CustomApi","MORT.Model.TranslateType","MORT.Service.CustomApi"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.cs","lines":521,"updatedUtc":"2026-05-31T14:35:32Z","category":"사용자 인터페이스","intent":"SettingBrowserUI, ListData, SettingData 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 Init, GetTitle, GetShop, GetExtraLink, GetInformation, GetDBPath, GetDownloadLink, GetDBFileName 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["SettingBrowserUI","ListData","SettingData"],"methods":[{"access":"public","name":"Init","line":77,"signature":"public void Init(string path, string gamePath, string content)"},{"access":"public","name":"GetTitle","line":101,"signature":"public string GetTitle()"},{"access":"public","name":"GetShop","line":114,"signature":"public string GetShop()"},{"access":"public","name":"GetExtraLink","line":119,"signature":"public string GetExtraLink()"},{"access":"public","name":"GetInformation","line":124,"signature":"public string GetInformation()"},{"access":"public","name":"GetDBPath","line":129,"signature":"public string GetDBPath()"},{"access":"public","name":"GetDownloadLink","line":141,"signature":"public string GetDownloadLink()"},{"access":"public","name":"GetDBFileName","line":146,"signature":"public string GetDBFileName()"},{"access":"public","name":"GetSettingPath","line":151,"signature":"public string GetSettingPath()"},{"access":"public","name":"GetSettingFileName","line":164,"signature":"public string GetSettingFileName()"},{"access":"public","name":"Init","line":182,"signature":"public void Init()"},{"access":"private","name":"DownloadList","line":212,"signature":"private void DownloadList()"},{"access":"private","name":"ShowInformation","line":239,"signature":"private void ShowInformation(ListViewItem item, string key)"},{"access":"private","name":"SetLinkLabel","line":317,"signature":"private void SetLinkLabel(LinkLabel lbLink, string text)"},{"access":"private","name":"listView1_SelectedIndexChanged","line":327,"signature":"private void listView1_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"lbLinkShop_LinkClicked","line":352,"signature":"private void lbLinkShop_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"lbLinkExtra_LinkClicked","line":362,"signature":"private void lbLinkExtra_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)"},{"access":"private","name":"tbInformation_LinkClicked","line":372,"signature":"private void tbInformation_LinkClicked(object sender, LinkClickedEventArgs e)"},{"access":"private","name":"btAppaly_Click","line":382,"signature":"private void btAppaly_Click(object sender, EventArgs e)"},{"access":"private","name":"btSearch_Click","line":458,"signature":"private void btSearch_Click(object sender, EventArgs e)"},{"access":"private","name":"SearchGame","line":464,"signature":"private void SearchGame(string text)"},{"access":"private","name":"SettingBrowserUI_FormClosing","line":510,"signature":"private void SettingBrowserUI_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"tbSearch_TextChanged","line":515,"signature":"private void tbSearch_TextChanged(object sender, EventArgs e)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Net","System.Windows.Forms"]},{"path":"MORT/SettingBrowser/SettingBrowserUI.Designer.cs","lines":249,"updatedUtc":"2024-05-16T14:49:33Z","category":"WinForms UI 선언","intent":"SettingBrowserUI 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["SettingBrowserUI"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/SettingData/BaseSettingData.cs","lines":362,"updatedUtc":"2026-05-04T13:03:18Z","category":"설정 데이터 모델","intent":"고급 설정 항목이 공통으로 가져야 할 키, 기본값, 현재값과 변환 계약을 정의한다.","operation":"문자열 설정 값을 실제 형식으로 읽고 쓰는 기반 동작을 제공하며 구체 bool·숫자·문자열 설정이 이를 사용한다.","generated":false,"documentationSource":"manual","types":["ISettingDataParse","ISettingData","SettingDataFactory","BaseSettingData","JsonSettingData","BoolSettingData","IntSettingData","StringSettingData","TranslationFileSettingData","HotKeySettingData"],"methods":[{"access":"public","name":"ToSave","line":84,"signature":"public virtual string ToSave()"},{"access":"public","name":"SetDefault","line":89,"signature":"public virtual void SetDefault()"},{"access":"public","name":"LoadValue","line":94,"signature":"public virtual void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":114,"signature":"public override string ToSave()"},{"access":"public","name":"LoadValue","line":121,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"SetDefault","line":147,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":164,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":188,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":212,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"LoadValue","line":236,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":252,"signature":"public override string ToSave()"},{"access":"public","name":"SetDefault","line":277,"signature":"public override void SetDefault()"},{"access":"public","name":"LoadValue","line":296,"signature":"public override void LoadValue(string fileData)"},{"access":"public","name":"ToSave","line":315,"signature":"public override string ToSave()"},{"access":"private","name":"LoadHotkey","line":338,"signature":"private void LoadHotkey(int index, KeyInputLabel.KeyType keyType, string fileData, string extraKey = \"…\")"},{"access":"public","name":"SetDefault","line":356,"signature":"public override void SetDefault()"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Text.Json","MORT","MORT.SettingData"]},{"path":"MORT/SettingData/GeminiPreset.cs","lines":96,"updatedUtc":"2026-05-04T13:03:18Z","category":"Gemini 설정 모델","intent":"Gemini 모델, 명령, thinking 옵션처럼 하나의 번역 프리셋을 이루는 값을 직렬화 가능한 형태로 보관한다.","operation":"설정 로드 시 값이 채워지고 GeminiConfigMaker와 GeminiTranslatorAPI가 요청 본문을 만들 때 해당 값을 읽는다.","generated":false,"documentationSource":"manual","types":["GeminiPresetValue"],"methods":[{"access":"public","name":"TokenLimitPresetValue","line":53,"signature":"public static int TokenLimitPresetValue(int presetType)"},{"access":"public","name":"ThinkingBudgetPresetValue","line":63,"signature":"public static int ThinkingBudgetPresetValue(int presetType)"},{"access":"public","name":"TemperaturePresetValue","line":73,"signature":"public static int TemperaturePresetValue(int presetType)"}],"dependencies":["System"]},{"path":"MORT/SettingData/SerializableFont.cs","lines":39,"updatedUtc":"2023-07-13T10:38:58Z","category":"설정 데이터 모델","intent":"System.Drawing.Font를 기존 설정 형식에 저장하고 다시 복원할 수 있는 단순 값 형태로 변환한다.","operation":"글꼴 이름·크기·스타일을 직렬화 필드로 보관하고 UI 적용 시 Font 객체를 재구성한다.","generated":false,"documentationSource":"manual","types":["SerializableFont"],"methods":[{"access":"public","name":"FromFont","line":27,"signature":"public static SerializableFont FromFont(Font f)"},{"access":"public","name":"ToFont","line":32,"signature":"public Font ToFont()"}],"dependencies":["System","System.Drawing"]},{"path":"MORT/SettingManager.cs","lines":1931,"updatedUtc":"2026-05-04T13:03:18Z","category":"호환 설정","intent":"기존 사용자 설정 파일과 호환되는 키·enum·기본값을 읽고 실행 중 설정 상태로 제공한다.","operation":"설정 파일을 키별로 파싱해 상태를 채우고 UI와 서비스가 읽도록 노출하며, 저장 시 기존 직렬화 이름과 @KEY 형식을 유지한다.","generated":false,"documentationSource":"automatic","types":["OcrLanguageType","QuickSettingData","FontColorType","HSVData","SettingManager","Skin","TransType","OcrType","SortType","DeepLAPIEndpointType"],"methods":[{"access":"public","name":"GetCaptureFullArea","line":549,"signature":"public Rectangle GetCaptureFullArea()"},{"access":"public","name":"GetLocationX","line":579,"signature":"public int GetLocationX(int index)"},{"access":"public","name":"GetLocationY","line":596,"signature":"public int GetLocationY(int index)"},{"access":"private","name":"SaveLine","line":612,"signature":"private void SaveLine(StreamWriter newTask, string key, string value)"},{"access":"public","name":"saveSetting","line":618,"signature":"public void saveSetting(string fileName)"},{"access":"public","name":"GetDefaultResultCode","line":918,"signature":"public string GetDefaultResultCode(bool isDeepl = false)"},{"access":"public","name":"SetDefault","line":948,"signature":"public void SetDefault()"},{"access":"public","name":"LoadSettingfile","line":1047,"signature":"public void LoadSettingfile(string fileName)"},{"access":"private","name":"ParseBoolData","line":1838,"signature":"private void ParseBoolData(string line, ref bool boolValue)"},{"access":"private","name":"ParseIntData","line":1855,"signature":"private void ParseIntData(string line, ref int value)"},{"access":"public","name":"GetOcrLanguage","line":1865,"signature":"public OcrLanguageType GetOcrLanguage()"},{"access":"public","name":"GetOcrType","line":1922,"signature":"public static OcrType GetOcrType(int type)"}],"dependencies":["R3","System","System.Collections.Generic","System.Drawing","System.IO"]},{"path":"MORT/Settings.cs","lines":33,"updatedUtc":"2023-07-10T15:57:39Z","category":"설정 호환 보조","intent":"과거 설정 접근 방식이나 애플리케이션 설정 값을 현재 SettingManager 흐름과 연결한다.","operation":"호출자가 요구하는 설정 값을 기존 이름으로 노출하고 실제 읽기·저장 책임은 관련 설정 구성요소에 위임한다.","generated":false,"documentationSource":"manual","types":["Settings"],"methods":[{"access":"private","name":"SettingChangingEventHandler","line":22,"signature":"private void SettingChangingEventHandler(object sender, System.Configuration.SettingChangingEventArgs e)"},{"access":"private","name":"SettingsSavingEventHandler","line":27,"signature":"private void SettingsSavingEventHandler(object sender, System.ComponentModel.CancelEventArgs e)"}],"dependencies":[]},{"path":"MORT/TabControl.cs","lines":293,"updatedUtc":"2023-07-13T10:38:58Z","category":"사용자 정의 UI","intent":"MORT 설정 화면의 탭 선택과 그리기 모양을 기본 WinForms TabControl보다 세밀하게 제어한다.","operation":"탭 헤더의 크기·색상·선택 상태를 직접 계산해 그리며 기존 폼은 일반 TabControl처럼 페이지를 추가한다.","generated":false,"documentationSource":"manual","types":["TabControl","TabPageChangeEventArgs"],"methods":[{"access":"protected","name":"Dispose","line":33,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":51,"signature":"private void InitializeComponent()"},{"access":"public","name":"ToString","line":67,"signature":"public override String ToString()"},{"access":"public","name":"ShouldSerializeBackColor","line":112,"signature":"public bool ShouldSerializeBackColor()"},{"access":"public","name":"ResetBackColor","line":116,"signature":"public override void ResetBackColor()"},{"access":"protected","name":"OnParentBackColorChanged","line":123,"signature":"protected override void OnParentBackColorChanged(EventArgs e)"},{"access":"protected","name":"OnSelectedIndexChanged","line":129,"signature":"protected override void OnSelectedIndexChanged(EventArgs e)"},{"access":"protected","name":"OnPaint","line":136,"signature":"protected override void OnPaint(PaintEventArgs e)"},{"access":"protected","name":"WndProc","line":221,"signature":"protected override void WndProc(ref Message m)"},{"access":"private","name":"TestTab","line":245,"signature":"private TabPage TestTab(Point pt)"},{"access":"public","name":"SelectedTabPageChangeEventHandler","line":289,"signature":"public delegate void SelectedTabPageChangeEventHandler(Object sender, TabPageChangeEventArgs e)"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransAPI/CustomAPI.cs","lines":570,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"CustomAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, GetResult, ConvertTemplateToJson, SplitPropertiesByComa, NormalizeValue, SplitArrayElements, ExtractValue, FindValueByKey 이다.","generated":false,"documentationSource":"automatic","types":["CustomAPI"],"methods":[{"access":"public","name":"Init","line":37,"signature":"public void Init(string url, string transCode, string resultCode, string presetName)"},{"access":"public","name":"GetResult","line":45,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"ConvertTemplateToJson","line":152,"signature":"private string ConvertTemplateToJson(string template)"},{"access":"private","name":"SplitPropertiesByComa","line":188,"signature":"private List\u003cstring\u003e SplitPropertiesByComa(string content)"},{"access":"private","name":"NormalizeValue","line":284,"signature":"private string NormalizeValue(string value)"},{"access":"private","name":"SplitArrayElements","line":316,"signature":"private List\u003cstring\u003e SplitArrayElements(string content)"},{"access":"public","name":"ExtractValue","line":379,"signature":"public string ExtractValue(string realJson, string templateJson, string resultToken)"},{"access":"private","name":"FindValueByKey","line":428,"signature":"private string FindValueByKey(JsonElement element, string keyName)"},{"access":"private","name":"GetResultDefault","line":453,"signature":"private string GetResultDefault(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":564,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["MORT.Model.CustomApi","MORT.Service.CustomApi","RestSharp","System","System.Collections.Generic","System.Linq","System.Text","System.Text.Json","System.Text.RegularExpressions"]},{"path":"MORT/TransAPI/DeepLAPITranslateAPI.cs","lines":129,"updatedUtc":"2026-06-17T15:53:42Z","category":"번역 제공자 어댑터","intent":"DeepLAPITranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitApiKey, Init, GetResult 이다.","generated":false,"documentationSource":"automatic","types":["DeepLAPITranslateAPI"],"methods":[{"access":"public","name":"InitApiKey","line":25,"signature":"public void InitApiKey(string apiKey)"},{"access":"public","name":"Init","line":30,"signature":"public void Init(string transCode, string resultCode, DeepLAPIEndpointType endpointType)"},{"access":"public","name":"GetResult","line":51,"signature":"public string GetResult(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Diagnostics","System.Linq","System.Text.Json"]},{"path":"MORT/TransAPI/DeepLTranslateAPI.cs","lines":209,"updatedUtc":"2026-05-04T13:03:18Z","category":"번역 제공자 어댑터","intent":"IDeeplAPIContract, DeepLTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Dispose, InitContract, Init, CheckAndInitWebview, ShowWebview, DoTrans, WaitResultAsync 이다.","generated":false,"documentationSource":"automatic","types":["IDeeplAPIContract","DeepLTranslateAPI"],"methods":[{"access":"public","name":"Dispose","line":36,"signature":"public void Dispose()"},{"access":"public","name":"InitContract","line":41,"signature":"public void InitContract(IDeeplAPIContract contract)"},{"access":"public","name":"Init","line":46,"signature":"public void Init(string transCode, string resultCode, string frontUrl, string urlFormat, string elementTarget)"},{"access":"private","name":"CheckAndInitWebview","line":73,"signature":"private void CheckAndInitWebview()"},{"access":"public","name":"ShowWebview","line":95,"signature":"public void ShowWebview()"},{"access":"public","name":"DoTrans","line":126,"signature":"public string DoTrans(string original, ref bool isError, CancellationToken ct)"},{"access":"private","name":"WaitResultAsync","line":192,"signature":"private async Task\u003c(string, bool)\u003e WaitResultAsync(CancellationToken ct)"}],"dependencies":["System","System.Text.RegularExpressions","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/DeeplWebView.cs","lines":391,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"DeeplWebView 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 PrepareTranslate, Init, DoTrans, ConvertHtmlToResult, SetEmptyResultAsync, RefreshTextAsync, SourceAsync, WebView_NavigationCompleted 이다.","generated":false,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"public","name":"PrepareTranslate","line":52,"signature":"public void PrepareTranslate(DateTime dateTimeout)"},{"access":"public","name":"Init","line":61,"signature":"public void Init(IDeeplAPIContract contract, string frontUrl, string urlFormat, string elementTarget)"},{"access":"public","name":"DoTrans","line":120,"signature":"public void DoTrans(string original, string transCode, string resultCode)"},{"access":"private","name":"ConvertHtmlToResult","line":127,"signature":"private string ConvertHtmlToResult(string html)"},{"access":"private","name":"SetEmptyResultAsync","line":156,"signature":"private async Task SetEmptyResultAsync()"},{"access":"private","name":"RefreshTextAsync","line":214,"signature":"private async Task RefreshTextAsync()"},{"access":"private","name":"SourceAsync","line":254,"signature":"private async Task SourceAsync(string text, string transCode, string resultCode)"},{"access":"private","name":"WebView_NavigationCompleted","line":368,"signature":"private void WebView_NavigationCompleted(object sender, Microsoft.Web.WebView2.Core.CoreWebView2NavigationCompletedEventArgs e)"},{"access":"private","name":"DeeplWebView_FormClosing","line":377,"signature":"private void DeeplWebView_FormClosing(object sender, FormClosingEventArgs e)"}],"dependencies":["Microsoft.Web.WebView2.WinForms","System","System.ComponentModel","System.Reflection.Metadata","System.Threading","System.Threading.Tasks","System.Windows.Controls","System.Windows.Forms"]},{"path":"MORT/TransAPI/DeeplWebView.Designer.cs","lines":50,"updatedUtc":"2026-05-04T13:03:18Z","category":"WinForms UI 선언","intent":"DeeplWebView 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["DeeplWebView"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransAPI/EzTransAPI.cs","lines":210,"updatedUtc":"2025-12-01T14:55:49Z","category":"번역 제공자 어댑터","intent":"EzTransAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 RegOpenKeyEx, RegQueryValueEx, LoadLibrary, GetProcAddress, J2K_InitializeEx, J2K_FreeMem, J2K_TranslateMMNT, J2K_TranslateMMNTW 이다.","generated":false,"documentationSource":"automatic","types":["EzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":11,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":14,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":20,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":23,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":26,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":30,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":34,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":37,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":73,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":84,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":112,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":123,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":179,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.IO","System.Runtime.InteropServices","System.Text"]},{"path":"MORT/TransAPI/GeminiTranslatorAPI.cs","lines":223,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"GeminiErrorType, GeminiTranslatorAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Initialize, InitializeModel, InitializeCustom, InternalTranslateTextAsync, InitializeCommand, CombineTextOptimized, TranslateTextAsync 이다.","generated":false,"documentationSource":"automatic","types":["GeminiErrorType","GeminiTranslatorAPI"],"methods":[{"access":"public","name":"Initialize","line":45,"signature":"public void Initialize(string sourceCode, string resultCode)"},{"access":"public","name":"InitializeModel","line":60,"signature":"public void InitializeModel(string model, string apiKey, bool useDefaultModel)"},{"access":"public","name":"InitializeCustom","line":67,"signature":"public void InitializeCustom(string customModel, string command, bool disableDefaultCommand)"},{"access":"private","name":"InternalTranslateTextAsync","line":75,"signature":"private async Task\u003c(string Result, GeminiErrorType Error)\u003e InternalTranslateTextAsync(string command, string requestText, string ocrText, bool saveResult, CancellationToken token)"},{"access":"private","name":"InitializeCommand","line":173,"signature":"private void InitializeCommand()"},{"access":"private","name":"CombineTextOptimized","line":203,"signature":"private string CombineTextOptimized(string text)"},{"access":"public","name":"TranslateTextAsync","line":209,"signature":"public async Task\u003c(string Result, GeminiErrorType Error)\u003e TranslateTextAsync(string text, CancellationToken token)"}],"dependencies":["MORT.Service.Gemini","Newtonsoft.Json","System","System.Net.Http","System.Text","System.Text.Json","System.Threading","System.Threading.Tasks"]},{"path":"MORT/TransAPI/GoogleBasicTranslateAPI.cs","lines":170,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"IGoogleBasicTranslateAPIContract, GoogleBasicTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 InitContract, UpdateCondition, SetTransCode, GetResult, DoTrans 이다.","generated":false,"documentationSource":"automatic","types":["IGoogleBasicTranslateAPIContract","GoogleBasicTranslateAPI"],"methods":[{"access":"public","name":"InitContract","line":25,"signature":"public void InitContract(IGoogleBasicTranslateAPIContract contract)"},{"access":"public","name":"UpdateCondition","line":30,"signature":"public void UpdateCondition()"},{"access":"public","name":"SetTransCode","line":35,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"private","name":"GetResult","line":50,"signature":"private string GetResult(string original, ref bool isError, string transCode , string resultCode )"},{"access":"public","name":"DoTrans","line":135,"signature":"public string DoTrans(string original, ref bool isError)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/NaverTranslateAPI.cs","lines":206,"updatedUtc":"2026-06-17T15:53:37Z","category":"번역 제공자 어댑터","intent":"NaverTranslateAPI 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 Init, ChangeValue, GetAPIType, SetTransCode, GetResult, GetJsonElementText 이다.","generated":false,"documentationSource":"automatic","types":["NaverTranslateAPI"],"methods":[{"access":"public","name":"Init","line":24,"signature":"public void Init(string idKey, string secretKey, string apiType, bool isPaid = true)"},{"access":"private","name":"Init","line":34,"signature":"private void Init(TransManager.NaverKeyData data)"},{"access":"public","name":"ChangeValue","line":47,"signature":"public void ChangeValue(string idKey, string secretKey, bool isPaid = false)"},{"access":"public","name":"GetAPIType","line":57,"signature":"public string GetAPIType()"},{"access":"public","name":"SetTransCode","line":62,"signature":"public void SetTransCode(string transCode, string resultCode)"},{"access":"public","name":"GetResult","line":68,"signature":"public string GetResult(string original, ref bool isError)"},{"access":"private","name":"GetJsonElementText","line":198,"signature":"private static string GetJsonElementText(JsonElement element)"}],"dependencies":["RestSharp","System","System.Collections.Generic","System.Text.Json"]},{"path":"MORT/TransAPI/PapagoWebTranslateAPI.cs","lines":102,"updatedUtc":"2026-07-30T14:18:50Z","category":"번역 제공자 어댑터","intent":"PapagoWebTranslateAPI, TestPA 번역 방식의 인증, 요청 생성, 응답 파싱과 제공자 고유 오류 처리를 캡슐화한다.","operation":"초기화 메서드가 키와 언어 코드를 저장하고, 번역 메서드가 요청을 보낸 뒤 응답을 문자열과 오류 상태로 변환한다. 주요 지점은 TranslateAsync, Init 이다.","generated":false,"documentationSource":"automatic","types":["PapagoWebTranslateAPI","TestPA"],"methods":[{"access":"public","name":"TranslateAsync","line":25,"signature":"public async Task\u003c(string Result, bool IsError)\u003e TranslateAsync(string text)"},{"access":"public","name":"Init","line":95,"signature":"public void Init(string transCode, string resultCode)"}],"dependencies":["System","System.Collections.Generic","System.Net.Http","System.Threading.Tasks","Newtonsoft.Json","System.IO"]},{"path":"MORT/TransForm.cs","lines":286,"updatedUtc":"2026-08-02T08:48:46Z","category":"사용자 인터페이스","intent":"TransForm 화면에서 사용자 입력을 받고 설정 또는 실행 기능을 관련 Manager·Service에 전달한다.","operation":"생성 시 현재 설정을 컨트롤에 반영하고 이벤트 핸들러가 myDelegate, updateProgress, ApplyRTL, ApplyFont, SetDefaultFont, AddText, updateText, StopTrans 동작을 호출한다.","generated":false,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"private","name":"myDelegate","line":30,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":31,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"ApplyRTL","line":52,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"ApplyFont","line":57,"signature":"public void ApplyFont(Font font)"},{"access":"public","name":"SetDefaultFont","line":65,"signature":"public void SetDefaultFont()"},{"access":"public","name":"AddText","line":73,"signature":"public void AddText(string addText)"},{"access":"public","name":"updateText","line":80,"signature":"public void updateText(string transText, string ocrText, SettingManager.TransType transType, bool isShowOCRResultFlag)"},{"access":"public","name":"StopTrans","line":109,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":118,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":122,"signature":"public void StartTrans()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":147,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":153,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":161,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":194,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":201,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_FormClosing","line":208,"signature":"private void TransForm_FormClosing(Object sender, FormClosingEventArgs e)"},{"access":"private","name":"TransForm_MouseDown","line":222,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":227,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"pictureBox3_Click","line":236,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":241,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":249,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":255,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":260,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":265,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":270,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":276,"signature":"public void ClearWarningMessage()"}],"dependencies":["System","System.ComponentModel","System.Drawing","System.IO","System.Text.RegularExpressions","System.Threading","System.Windows.Forms"]},{"path":"MORT/TransForm.Designer.cs","lines":94,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransForm 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransForm"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormLayer.cs","lines":939,"updatedUtc":"2026-08-04T06:46:01Z","category":"레이어 번역창","intent":"투명 레이어 위에 번역문을 표시하고 정렬·크기·TopMost·마우스 상호작용을 관리한다.","operation":"번역 결과를 현재 글꼴과 정렬 옵션으로 배치하고 창 투명도와 클릭 통과·표시 상태를 번역 시작/종료 흐름에 맞춰 갱신한다.","generated":false,"documentationSource":"manual","types":["TransFormLayer","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":32,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"AddText","line":140,"signature":"public void AddText(string addText)"},{"access":"public","name":"ForceUpdateText","line":147,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"StopTrans","line":153,"signature":"public void StopTrans()"},{"access":"public","name":"Prepare","line":159,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":163,"signature":"public void StartTrans()"},{"access":"private","name":"myDelegate","line":177,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":178,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"updateText","line":193,"signature":"public void updateText(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"Init","line":215,"signature":"private void Init()"},{"access":"public","name":"ApplyRTL","line":238,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"private","name":"SetTextAlignmentBottom","line":250,"signature":"private void SetTextAlignmentBottom(bool isBottom)"},{"access":"private","name":"SetTextAlignmentRight","line":262,"signature":"private void SetTextAlignmentRight(bool isRight)"},{"access":"public","name":"ApplyTextAlignmentBottom","line":268,"signature":"public void ApplyTextAlignmentBottom(bool isBottom)"},{"access":"public","name":"ApplyTextAlignmentRight","line":282,"signature":"public void ApplyTextAlignmentRight(bool isRight)"},{"access":"public","name":"LocalizeForm","line":305,"signature":"public void LocalizeForm()"},{"access":"public","name":"UpdateTransform","line":329,"signature":"public void UpdateTransform()"},{"access":"private","name":"DoUpdatePaint","line":335,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"UpdatePaint","line":528,"signature":"public void UpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":544,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"SetTopMost","line":550,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyTopMost","line":558,"signature":"public void ApplyTopMost()"},{"access":"private","name":"closeApplication","line":596,"signature":"private void closeApplication()"},{"access":"public","name":"destroyForm","line":603,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":612,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":656,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":769,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"SetInvisibleBackground","line":776,"signature":"public void SetInvisibleBackground()"},{"access":"public","name":"SetVisibleBackground","line":782,"signature":"public void SetVisibleBackground()"},{"access":"public","name":"SetOverHitLayer","line":789,"signature":"public void SetOverHitLayer()"},{"access":"public","name":"DisableOverHitLayer","line":796,"signature":"public void DisableOverHitLayer()"},{"access":"private","name":"pictureBox3_Click","line":804,"signature":"private void pictureBox3_Click(object sender, EventArgs e)"},{"access":"private","name":"pictureBox2_Click","line":809,"signature":"private void pictureBox2_Click(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_Resize","line":814,"signature":"private void TransFormLayer_Resize(object sender, EventArgs e)"},{"access":"private","name":"TransFormLayer_MouseClick","line":840,"signature":"private void TransFormLayer_MouseClick(object sender, MouseEventArgs e)"},{"access":"private","name":"TransFormLayer_FormClosing","line":848,"signature":"private void TransFormLayer_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"SortTypeBasicMenu_Click","line":857,"signature":"private void SortTypeBasicMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"SortTypeCenterMenu_Click","line":867,"signature":"private void SortTypeCenterMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"removeMenu_Click","line":877,"signature":"private void removeMenu_Click(object sender, EventArgs e)"},{"access":"private","name":"CloseToolStripMenuItem_Click","line":884,"signature":"private void CloseToolStripMenuItem_Click(object sender, EventArgs e)"},{"access":"private","name":"forceTransparencyMenu_Click","line":889,"signature":"private void forceTransparencyMenu_Click(object sender, EventArgs e)"},{"access":"public","name":"ForceTransparency","line":894,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":902,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":920,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ApplyWarningMessage","line":925,"signature":"public void ApplyWarningMessage(string message, DateTime dtDisplayTime)"},{"access":"public","name":"ClearWarningMessage","line":931,"signature":"public void ClearWarningMessage()"}],"dependencies":["MORT.LocalizeManager","System","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.IO","System.Runtime.InteropServices","System.Windows.Forms"]},{"path":"MORT/TransFormLayer.Designer.cs","lines":132,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormLayer 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormLayer"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/TransFormOver.cs","lines":2362,"updatedUtc":"2026-08-04T10:10:39Z","category":"Overlay 번역창","intent":"OCR 문장별 화면 좌표에 번역문을 배치해 원문 위치 위를 덮는 Overlay 스킨을 구현한다.","operation":"OCRDataManager의 ResultData와 캡처 원점을 받아 문자열 크기와 줄별 사각형을 계산하고 자동 글꼴·전경·배경색으로 각 영역을 그린다.","generated":false,"documentationSource":"manual","types":["TransFormOver","OverlayDataCache","OverlayRenderBlock","dragMode"],"methods":[{"access":"public","name":"SetWindowPos","line":33,"signature":"public static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags)"},{"access":"public","name":"SetWindowDisplayAffinity","line":36,"signature":"public static extern bool SetWindowDisplayAffinity(IntPtr hWnd, uint affinity)"},{"access":"private","name":"LowLevelKeyboardProc","line":45,"signature":"private delegate IntPtr LowLevelKeyboardProc(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"SetWindowsHookEx","line":49,"signature":"private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId)"},{"access":"private","name":"UnhookWindowsHookEx","line":53,"signature":"private static extern bool UnhookWindowsHookEx(IntPtr hhk)"},{"access":"private","name":"CallNextHookEx","line":56,"signature":"private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"GetModuleHandle","line":59,"signature":"private static extern IntPtr GetModuleHandle(string lpModuleName)"},{"access":"private","name":"SetHook","line":60,"signature":"private IntPtr SetHook(LowLevelKeyboardProc proc)"},{"access":"protected","name":"OnFormClosing","line":69,"signature":"protected override void OnFormClosing(FormClosingEventArgs e)"},{"access":"private","name":"ShowWindow","line":80,"signature":"private static extern int ShowWindow(int hwnd, int command)"},{"access":"private","name":"myDelegate","line":221,"signature":"private delegate void myDelegate(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"private","name":"updateProgress","line":222,"signature":"private void updateProgress(string transText, string ocrText, bool isShowOCRResultFlag)"},{"access":"public","name":"UpdateText","line":237,"signature":"public void UpdateText(List\u003cOCRDataManager.ResultData\u003e dataList, bool isShowOCRResultFlag, int positionX, int positionY)"},{"access":"private","name":"GetStableOverlayDataList","line":280,"signature":"private List\u003cOCRDataManager.ResultData\u003e GetStableOverlayDataList(List\u003cOCRDataManager.ResultData\u003e dataList)"},{"access":"private","name":"GetAreaRect","line":320,"signature":"private Rectangle GetAreaRect(OCRDataManager.ResultData data)"},{"access":"protected","name":"OnHandleCreated","line":333,"signature":"protected override void OnHandleCreated(EventArgs e)"},{"access":"private","name":"GetAsyncKeyState","line":348,"signature":"private static extern short GetAsyncKeyState(int vKey)"},{"access":"private","name":"HookCallback","line":349,"signature":"private IntPtr HookCallback(int nCode, IntPtr wParam, IntPtr lParam)"},{"access":"private","name":"Init","line":389,"signature":"private void Init()"},{"access":"protected","name":"OnClosed","line":412,"signature":"protected override void OnClosed(EventArgs e)"},{"access":"private","name":"ApplyAttachedCapture","line":418,"signature":"private void ApplyAttachedCapture(bool attached)"},{"access":"public","name":"SetAdjustPosition","line":431,"signature":"public void SetAdjustPosition(int x, int y)"},{"access":"public","name":"CheckSizeAndLocation","line":437,"signature":"public void CheckSizeAndLocation()"},{"access":"public","name":"HideTaksBar","line":482,"signature":"public void HideTaksBar()"},{"access":"public","name":"UpdateTransform","line":502,"signature":"public void UpdateTransform()"},{"access":"private","name":"AddText","line":532,"signature":"private void AddText(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"BuildRenderBlocks","line":709,"signature":"private List\u003cOverlayRenderBlock\u003e BuildRenderBlocks()"},{"access":"private","name":"ResolveBlockCollisions","line":781,"signature":"private static void ResolveBlockCollisions(List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"SplitVertically","line":830,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitVertically(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"SplitHorizontally","line":859,"signature":"private static (Rectangle First, Rectangle Second, long Loss) SplitHorizontally(Rectangle first, Rectangle second, bool preserveFirst, bool preserveSecond)"},{"access":"private","name":"GetWeightedBoundary","line":888,"signature":"private static int GetWeightedBoundary(int start, int end, Rectangle leading, Rectangle trailing)"},{"access":"private","name":"GetAreaLoss","line":896,"signature":"private static long GetAreaLoss(Rectangle originalFirst, Rectangle originalSecond, Rectangle first, Rectangle second)"},{"access":"private","name":"GetContentRect","line":905,"signature":"private static Rectangle GetContentRect(Rectangle viewRect)"},{"access":"private","name":"TryExpandInReadingDirection","line":911,"signature":"private void TryExpandInReadingDirection(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"WrapsPastSourceLineCount","line":969,"signature":"private bool WrapsPastSourceLineCount(Graphics g, OverlayRenderBlock block, Font font, Rectangle contentRect, StringFormat format)"},{"access":"private","name":"TryExpandForFont","line":977,"signature":"private void TryExpandForFont(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks, Font baseFont, StringFormat format, float targetSize)"},{"access":"private","name":"FindBestFontSize","line":1064,"signature":"private float FindBestFontSize(Graphics g, OverlayRenderBlock block, Font baseFont, Rectangle contentRect, StringFormat format, float preferredSize)"},{"access":"private","name":"GetPreferredFontPointSize","line":1102,"signature":"private static float GetPreferredFontPointSize(Graphics g, OverlayRenderBlock block, List\u003cOverlayRenderBlock\u003e blocks)"},{"access":"private","name":"GetMedianSourceLineSize","line":1133,"signature":"private static float GetMedianSourceLineSize(IEnumerable\u003cOCRDataManager.LineData\u003e lineDataList)"},{"access":"private","name":"GetSourceLineSize","line":1151,"signature":"private static int GetSourceLineSize(OCRDataManager.LineData lineData)"},{"access":"private","name":"GetSourceFontPointSize","line":1159,"signature":"private static float GetSourceFontPointSize(Graphics g, OverlayRenderBlock block)"},{"access":"private","name":"DoesTextFit","line":1178,"signature":"private bool DoesTextFit(Graphics g, string text, Font font, Rectangle rect, StringFormat format, bool vertical)"},{"access":"private","name":"GetLineRect","line":1226,"signature":"private static Rectangle GetLineRect(Rectangle contentRect, int index, float lineAdvance, bool vertical)"},{"access":"private","name":"DrawWrappedText","line":1240,"signature":"private void DrawWrappedText(Graphics g, OverlayRenderBlock block, Font font, StringFormat format, Color outlineColor1, int outlineWidth1, Color outlineColor2, int outlineWidth2)"},{"access":"private","name":"ConfigureStringFormat","line":1252,"signature":"private void ConfigureStringFormat(StringFormat format, bool vertical)"},{"access":"private","name":"GetAxisOverlap","line":1271,"signature":"private static int GetAxisOverlap(int firstStart, int firstEnd, int secondStart, int secondEnd)"},{"access":"private","name":"AddTextLegacy","line":1276,"signature":"private void AddTextLegacy(GraphicsPath gp, Graphics g, Font textFont, Rectangle rectangleOriginal, StringFormat sf)"},{"access":"private","name":"GetAutoOutlineColors","line":1510,"signature":"private void GetAutoOutlineColors(Color fontColor, out Color outline1, out Color outline2)"},{"access":"private","name":"ResolveDrawColors","line":1542,"signature":"private OverlayDrawColors ResolveDrawColors(OCRDataManager.ResultData targetData, int colorIdx, string text, Color outlineColor1, Color outlineColor2)"},{"access":"private","name":"DrawStringWithOutline2","line":1585,"signature":"private void DrawStringWithOutline2(Graphics g, string text, Font font, Rectangle rect, StringFormat sf, OCRDataManager.ResultData targetData, int colorIdx, Color outlineColor1, int outlineWidth1, Color outlineColor2,..."},{"access":"private","name":"GetFitSize","line":1661,"signature":"private float GetFitSize(Graphics g, string text, Font font, float emSize, StringFormat sf, bool isVertical)"},{"access":"private","name":"GetWrappedLinesByAddString","line":1702,"signature":"private List\u003cstring\u003e GetWrappedLinesByAddString(Graphics g, string text, Font font, int maxWidth, int maxHeight, StringFormat sf, bool isVertical)"},{"access":"public","name":"UpdatePaint","line":1778,"signature":"public void UpdatePaint()"},{"access":"private","name":"DoUpdatePaint","line":1819,"signature":"private void DoUpdatePaint()"},{"access":"public","name":"ApplyUseTopMostOptionWhenTranslate","line":2032,"signature":"public void ApplyUseTopMostOptionWhenTranslate(bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"ApplyRTL","line":2038,"signature":"public void ApplyRTL(bool enableRTL)"},{"access":"public","name":"SetTopMost","line":2051,"signature":"public void SetTopMost(bool topMost, bool useTopMostOptionWhenTranslate)"},{"access":"public","name":"Prepare","line":2059,"signature":"public void Prepare()"},{"access":"public","name":"StartTrans","line":2079,"signature":"public void StartTrans()"},{"access":"public","name":"StopTrans","line":2090,"signature":"public void StopTrans()"},{"access":"public","name":"ApplyTopMost","line":2095,"signature":"public void ApplyTopMost()"},{"access":"public","name":"destroyForm","line":2100,"signature":"public void destroyForm()"},{"access":"private","name":"TransForm_MouseDown","line":2112,"signature":"private void TransForm_MouseDown(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseMove","line":2156,"signature":"private void TransForm_MouseMove(object sender, MouseEventArgs e)"},{"access":"private","name":"TransForm_MouseUp","line":2269,"signature":"private void TransForm_MouseUp(object sender, MouseEventArgs e)"},{"access":"public","name":"setInvisibleBackground","line":2276,"signature":"public void setInvisibleBackground()"},{"access":"public","name":"setVisibleBackground","line":2284,"signature":"public void setVisibleBackground()"},{"access":"public","name":"setOverHitLayer","line":2294,"signature":"public void setOverHitLayer()"},{"access":"public","name":"disableOverHitLayer","line":2301,"signature":"public void disableOverHitLayer()"},{"access":"public","name":"VisibleOverlayTransAsync","line":2307,"signature":"public async void VisibleOverlayTransAsync(int waitTime)"},{"access":"public","name":"ForceTransparency","line":2324,"signature":"public void ForceTransparency()"},{"access":"public","name":"DoUpdate","line":2328,"signature":"public void DoUpdate(bool isTranslating)"},{"access":"public","name":"GetSkinType","line":2334,"signature":"public SettingManager.Skin GetSkinType()"},{"access":"public","name":"ForceUpdateText","line":2339,"signature":"public void ForceUpdateText(string text)"},{"access":"public","name":"ApplyWarningMessage","line":2344,"signature":"public void ApplyWarningMessage(string message, DateTime dtRemainTime)"},{"access":"public","name":"ClearWarningMessage","line":2349,"signature":"public void ClearWarningMessage()"}],"dependencies":["R3","System","MORT.Model.Debug","MORT.Service.Debug","MORT.Service.Overlay","System.Collections.Generic","System.ComponentModel","System.Drawing","System.Drawing.Drawing2D","System.Linq","System.Runtime.InteropServices","System.Threading","System.Threading.Tasks","System.Windows.Forms"]},{"path":"MORT/TransFormOver.Designer.cs","lines":53,"updatedUtc":"2025-03-16T06:03:29Z","category":"WinForms UI 선언","intent":"TransFormOver 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["TransFormOver"],"methods":[{"access":"protected","name":"Dispose","line":14,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":29,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/UIAdvencedOption.cs","lines":1254,"updatedUtc":"2026-08-02T08:48:46Z","category":"고급 설정 UI","intent":"OCR 처리, Overlay, 단축키, 클립보드, 창 동작 등 AdvencedOptionManager의 세부 옵션을 편집한다.","operation":"열릴 때 각 설정 값을 컨트롤에 바인딩하고 적용 시 타입별 값을 검증해 매니저에 저장한 뒤 영향받는 폼과 서비스를 갱신한다.","generated":false,"documentationSource":"manual","types":["UIAdvencedOption"],"methods":[{"access":"private","name":"LocalizeString","line":32,"signature":"private string LocalizeString(string key)"},{"access":"private","name":"AddHotKey","line":37,"signature":"private void AddHotKey(string title, string information, KeyInputLabel.KeyType type, CustomControl.CtHotKey hotKey)"},{"access":"private","name":"Init","line":43,"signature":"private void Init()"},{"access":"private","name":"InitData","line":73,"signature":"private void InitData()"},{"access":"private","name":"RenderGeminiTokenLimit","line":189,"signature":"private void RenderGeminiTokenLimit(int value)"},{"access":"private","name":"RenderGeminiThinkingBudget","line":196,"signature":"private void RenderGeminiThinkingBudget(int value)"},{"access":"private","name":"RenderGeminiTemperature","line":204,"signature":"private void RenderGeminiTemperature(int value)"},{"access":"private","name":"RenderGeminiPreset","line":211,"signature":"private void RenderGeminiPreset(GeminiPresetValue preset)"},{"access":"private","name":"RenderGeminiPresetValue","line":227,"signature":"private void RenderGeminiPresetValue(int presetType)"},{"access":"private","name":"RenderGeminiPresetRadioButton","line":234,"signature":"private void RenderGeminiPresetRadioButton(int presetType)"},{"access":"private","name":"SetUpDownValue","line":257,"signature":"private void SetUpDownValue(NumericUpDown componet, int value)"},{"access":"public","name":"SetAppSetting","line":275,"signature":"public void SetAppSetting()"},{"access":"private","name":"SetHotKey","line":300,"signature":"private void SetHotKey()"},{"access":"public","name":"SetTranslatorSetting","line":329,"signature":"public void SetTranslatorSetting()"},{"access":"private","name":"ApplyCustomApreset","line":355,"signature":"private void ApplyCustomApreset()"},{"access":"private","name":"SetOcrSetting","line":394,"signature":"private void SetOcrSetting()"},{"access":"public","name":"SetOverlaySetting","line":403,"signature":"public void SetOverlaySetting()"},{"access":"public","name":"SetLayerSetting","line":417,"signature":"public void SetLayerSetting()"},{"access":"public","name":"SetTranslationFormSetting","line":422,"signature":"public void SetTranslationFormSetting()"},{"access":"public","name":"SetDicSetting","line":432,"signature":"public void SetDicSetting()"},{"access":"public","name":"SetClipboardSetting","line":441,"signature":"public void SetClipboardSetting()"},{"access":"public","name":"SetClipboardSaveSetting","line":446,"signature":"public void SetClipboardSaveSetting()"},{"access":"private","name":"InitTranslationFile","line":456,"signature":"private void InitTranslationFile()"},{"access":"public","name":"SetTranslationFile","line":481,"signature":"public void SetTranslationFile()"},{"access":"private","name":"GetTranslationInfo","line":494,"signature":"private void GetTranslationInfo(string file)"},{"access":"private","name":"cblTransration_SelectedIndexChanged","line":503,"signature":"private void cblTransration_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOn","line":515,"signature":"private void OnClickTransrtionAllOn(object sender, EventArgs e)"},{"access":"private","name":"OnClickTransrtionAllOff","line":523,"signature":"private void OnClickTransrtionAllOff(object sender, EventArgs e)"},{"access":"private","name":"cbUseDbStyle_CheckedChanged","line":531,"signature":"private void cbUseDbStyle_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"SetAppLanguage","line":541,"signature":"private void SetAppLanguage()"},{"access":"private","name":"InitAppLanguage","line":613,"signature":"private void InitAppLanguage()"},{"access":"private","name":"UIAdvencedOption_FormClosing","line":666,"signature":"private void UIAdvencedOption_FormClosing(object sender, FormClosingEventArgs e)"},{"access":"private","name":"OnClickApply","line":674,"signature":"private void OnClickApply(object sender, EventArgs e)"},{"access":"private","name":"OnClickReset","line":695,"signature":"private void OnClickReset(object sender, EventArgs e)"},{"access":"private","name":"UIAdvencedOption_Load","line":709,"signature":"private void UIAdvencedOption_Load(object sender, EventArgs e)"},{"access":"private","name":"udMinFontSize_ValueChanged","line":714,"signature":"private void udMinFontSize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udMaxSFontize_ValueChanged","line":726,"signature":"private void udMaxSFontize_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"udReProcessDicCount_ValueChanged","line":737,"signature":"private void udReProcessDicCount_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"btnFont_Click","line":742,"signature":"private void btnFont_Click(object sender, EventArgs e)"},{"access":"public","name":"LocalizeForm","line":787,"signature":"public void LocalizeForm()"},{"access":"private","name":"RenderCustomApiPresetList","line":929,"signature":"private void RenderCustomApiPresetList()"},{"access":"private","name":"RenderCustomApiPreset","line":957,"signature":"private void RenderCustomApiPreset(CustomApiModel model)"},{"access":"private","name":"RenderCustomApiLanguageCode","line":974,"signature":"private void RenderCustomApiLanguageCode()"},{"access":"private","name":"cbCustomApiLanguageCode_CheckedChanged","line":979,"signature":"private void cbCustomApiLanguageCode_CheckedChanged(object sender, EventArgs e) =\u003e RenderCustomApiLanguageCode()"},{"access":"private","name":"ocrAreaBackgroundColor_Click","line":981,"signature":"private void ocrAreaBackgroundColor_Click(object sender, EventArgs e)"},{"access":"private","name":"ocrAreaSelectedColor_Click","line":1003,"signature":"private void ocrAreaSelectedColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnSetDefaultColor_Click","line":1014,"signature":"private void btnSetDefaultColor_Click(object sender, EventArgs e)"},{"access":"private","name":"btnColorPreview_Click","line":1020,"signature":"private void btnColorPreview_Click(object sender, EventArgs e)"},{"access":"private","name":"cbOverlayAutoColor_CheckedChanged","line":1025,"signature":"private void cbOverlayAutoColor_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTemperature_ValueChanged","line":1030,"signature":"private void _geminiTemperature_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiTokenLimit_ValueChanged","line":1039,"signature":"private void _geminiTokenLimit_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"_geminiThinkingBudget_ValueChanged","line":1048,"signature":"private void _geminiThinkingBudget_ValueChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetDefault_CheckedChanged","line":1057,"signature":"private void rbGeminiPresetDefault_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetLow_CheckedChanged","line":1068,"signature":"private void rbGeminiPresetLow_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"rbGeminiPresetCustom_CheckedChanged","line":1079,"signature":"private void rbGeminiPresetCustom_CheckedChanged(object sender, EventArgs e)"},{"access":"private","name":"_listCustomPreset_SelectedIndexChanged","line":1088,"signature":"private void _listCustomPreset_SelectedIndexChanged(object sender, EventArgs e)"},{"access":"private","name":"SaveCurrentPreset","line":1102,"signature":"private void SaveCurrentPreset()"},{"access":"private","name":"ParseHeaders","line":1142,"signature":"private List\u003cstring\u003e ParseHeaders(string headerText)"},{"access":"private","name":"GetUniquePresetName","line":1166,"signature":"private string GetUniquePresetName(string baseName, int excludeIndex = -1)"},{"access":"private","name":"_btCustomAdd_Click","line":1196,"signature":"private void _btCustomAdd_Click(object sender, EventArgs e)"},{"access":"private","name":"_btCustomRemove_Click","line":1215,"signature":"private void _btCustomRemove_Click(object sender, EventArgs e)"}],"dependencies":["MORT.CustomControl","MORT.LocalizeManager","MORT.Model.CustomApi","MORT.Service.CustomApi","MORT.SettingData","System","System.Collections.Generic","System.Drawing","System.IO","System.Linq","System.Reflection","System.Windows.Forms","System.Xml.Serialization"]},{"path":"MORT/UIAdvencedOption.Designer.cs","lines":2401,"updatedUtc":"2026-08-02T08:48:46Z","category":"WinForms UI 선언","intent":"UIAdvencedOption 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["UIAdvencedOption"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]},{"path":"MORT/Util.cs","lines":1038,"updatedUtc":"2026-05-31T14:35:32Z","category":"공통 호환 유틸리티","intent":"문장 분할, 파일·경로, 화면 좌표, 색상, 언어 코드 등 여러 오래된 호출자가 공유하는 작은 변환과 플랫폼 보조 동작을 제공한다.","operation":"정적 메서드가 입력을 변환하거나 환경 정보를 조회해 반환한다. 호출 범위가 넓으므로 시그니처나 기본 동작 변경은 각 소비자를 먼저 검색해야 한다.","generated":false,"documentationSource":"manual","types":["ComboboxItem","FileStepType","UpdateType","GlobalDefine","TesseractLanguageType","Util"],"methods":[{"access":"public","name":"ToString","line":16,"signature":"public override string ToString()"},{"access":"public","name":"ColorToV","line":114,"signature":"public static byte ColorToV(Color color)"},{"access":"public","name":"ColorToOklchL","line":120,"signature":"public static double ColorToOklchL(Color color)"},{"access":"public","name":"ParseColor","line":147,"signature":"public static Color ParseColor(string color, Color defaultColor)"},{"access":"public","name":"HsvToRgb","line":170,"signature":"public static Color HsvToRgb(double h, double s, double v)"},{"access":"public","name":"RGB2HSV","line":195,"signature":"public static void RGB2HSV(Color color, out double h, out double s, out double v)"},{"access":"public","name":"RGB2HSV","line":200,"signature":"public static void RGB2HSV(int r, int g, int b, out double h, out double s, out double v)"},{"access":"public","name":"ColorToString","line":237,"signature":"public static string ColorToString(Color color)"},{"access":"public","name":"OpenURL","line":242,"signature":"public static void OpenURL(string url)"},{"access":"public","name":"GetScreenTopPosition","line":255,"signature":"public static int GetScreenTopPosition()"},{"access":"public","name":"GetOcrLanguageCode","line":270,"signature":"public static string GetOcrLanguageCode(OcrLanguageType languageType)"},{"access":"public","name":"GetIsEqualMainOcrCode","line":283,"signature":"public static bool GetIsEqualMainOcrCode(string code, string target)"},{"access":"public","name":"GetSpliteToken","line":305,"signature":"public static string GetSpliteToken(SettingManager.TransType transType)"},{"access":"public","name":"GetSpliteByToken","line":333,"signature":"public static string[] GetSpliteByToken(string result, SettingManager.TransType transType)"},{"access":"public","name":"SetSpliteToken","line":442,"signature":"public static void SetSpliteToken(string naver, string google, string useAdvenced)"},{"access":"public","name":"GetUpdateType","line":472,"signature":"public static UpdateType GetUpdateType(int nowVersion, string newVersion, string minorVersion)"},{"access":"public","name":"TryParseBool","line":523,"signature":"public static bool TryParseBool(out bool result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseString","line":538,"signature":"public static bool TryParseString(out string result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"TryParseInt","line":554,"signature":"public static bool TryParseInt(out int result, string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseBool","line":569,"signature":"public static bool ParseBool(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseInt","line":580,"signature":"public static int ParseInt(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"ParseString","line":600,"signature":"public static string ParseString(string data, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"GetNextLine","line":644,"signature":"public static string GetNextLine(string data, string key)"},{"access":"public","name":"ParseStringFromFile","line":681,"signature":"public static string ParseStringFromFile(string file, string key, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"OpenFile","line":702,"signature":"public static StreamReader OpenFile(string relativePath)"},{"access":"public","name":"ToCurrentFilePath","line":735,"signature":"public static string ToCurrentFilePath(string path)"},{"access":"public","name":"SaveFile","line":742,"signature":"public static void SaveFile(string file, string data, bool isAppend = false)"},{"access":"public","name":"ChangeFileData","line":770,"signature":"public static void ChangeFileData(string file, string key, string value, char startKey = \u0027…\u0027, char endKey = \u0027…\u0027)"},{"access":"public","name":"CheckTimeSpan","line":837,"signature":"public static void CheckTimeSpan(bool isStart)"},{"access":"public","name":"ShowLog","line":852,"signature":"public static void ShowLog(string log)"},{"access":"public","name":"SetDPI","line":857,"signature":"public static void SetDPI(float dpiX, float dpiY)"},{"access":"public","name":"GetBorderWidth","line":871,"signature":"public static int GetBorderWidth()"},{"access":"public","name":"GetTitlebarHeight","line":881,"signature":"public static int GetTitlebarHeight()"},{"access":"public","name":"GetDpiMulti","line":892,"signature":"public static float GetDpiMulti()"},{"access":"public","name":"GetToolTip","line":903,"signature":"public static string GetToolTip()"},{"access":"public","name":"SaveDBFile","line":937,"signature":"public static void SaveDBFile(string path, Dictionary\u003cstring, string\u003e dic)"},{"access":"public","name":"LoadDBFile","line":955,"signature":"public static Dictionary\u003cstring, string\u003e LoadDBFile(string file, Dictionary\u003cstring, string\u003e dic = null)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.Drawing","System.IO","System.Text","System.Windows.Forms"]},{"path":"MORT/VersionCheck/VersionCheckLogic.cs","lines":550,"updatedUtc":"2026-05-31T14:35:32Z","category":"버전 확인","intent":"현재 버전과 배포 버전을 비교하고 업데이트가 필요한 경우 별도 Updater 실행에 필요한 정보를 준비한다.","operation":"원격 버전 정보를 읽어 비교하고 사용자 확인 뒤 업데이트 모듈을 시작하며 실패 시 현재 앱을 계속 사용할 수 있도록 오류를 분리한다.","generated":false,"documentationSource":"manual","types":["VersionCheckLogic"],"methods":[{"access":"public","name":"GetCheckUpdate","line":28,"signature":"public bool GetCheckUpdate()"},{"access":"public","name":"SetCheckUpdate","line":51,"signature":"public void SetCheckUpdate(bool isUse)"},{"access":"private","name":"ForceHttps","line":60,"signature":"private static string ForceHttps(string url)"},{"access":"private","name":"TryDownloadHash","line":70,"signature":"private static string TryDownloadHash(string url)"},{"access":"private","name":"IsRemoteConfigVersionMatched","line":98,"signature":"private bool IsRemoteConfigVersionMatched(string fileUrl, string expectedVersion)"},{"access":"private","name":"ParseConfigVersionValue","line":130,"signature":"private static string ParseConfigVersionValue(string configContent)"},{"access":"private","name":"IsInHashFailCooldown","line":149,"signature":"private static bool IsInHashFailCooldown()"},{"access":"public","name":"CheckVersion","line":181,"signature":"public void CheckVersion()"},{"access":"public","name":"CheckDefaultSetting","line":215,"signature":"public void CheckDefaultSetting()"},{"access":"private","name":"CheckMortVersion","line":278,"signature":"private void CheckMortVersion(String content)"},{"access":"private","name":"GetUpdaterLocalizeString","line":445,"signature":"private string GetUpdaterLocalizeString()"},{"access":"private","name":"UpdateDic","line":463,"signature":"private void UpdateDic(string fileName, String data)"},{"access":"private","name":"CheckDicVersion","line":496,"signature":"private void CheckDicVersion(String content, string checkType, string fileName)"},{"access":"private","name":"LocalizeString","line":544,"signature":"private string LocalizeString(string key, bool replaceLine = false)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.Linq","System.Net","System.Text","System.Windows.Forms","System.Xml.Linq"]},{"path":"PipeClient/PipeClient.cs","lines":145,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeClient, StatusType 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeClient","StatusType"],"methods":[{"access":"private","name":"InitEzTrans","line":26,"signature":"private void InitEzTrans()"},{"access":"private","name":"CheckCommand","line":55,"signature":"private void CheckCommand()"},{"access":"public","name":"Start","line":135,"signature":"public void Start(NamedPipeClientStream pipeClient)"}],"dependencies":["System","System.Collections.Generic","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"PipeClient/PipeEzTransAPI.cs","lines":218,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"PipeEzTransAPI 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["PipeEzTransAPI"],"methods":[{"access":"public","name":"RegOpenKeyEx","line":16,"signature":"public static extern int RegOpenKeyEx(IntPtr hKey, [In] string lpSubKey, int ulOptions, int samDesired, out IntPtr phkResult)"},{"access":"public","name":"RegQueryValueEx","line":19,"signature":"public static extern int RegQueryValueEx(IntPtr hKey, string lpValueName, int lpReserved, out uint lpType, StringBuilder lpData, ref uint lpcbData)"},{"access":"public","name":"LoadLibrary","line":25,"signature":"public static extern IntPtr LoadLibrary(String fileName)"},{"access":"private","name":"GetProcAddress","line":28,"signature":"private extern static IntPtr GetProcAddress(IntPtr hwnd, string procedureName)"},{"access":"private","name":"J2K_InitializeEx","line":31,"signature":"private delegate bool J2K_InitializeEx(IntPtr ptr, IntPtr key)"},{"access":"private","name":"J2K_FreeMem","line":35,"signature":"private delegate bool J2K_FreeMem(IntPtr krStr)"},{"access":"private","name":"J2K_TranslateMMNT","line":39,"signature":"private delegate IntPtr J2K_TranslateMMNT(int data0, byte[] krStr)"},{"access":"private","name":"J2K_TranslateMMNTW","line":42,"signature":"private delegate IntPtr J2K_TranslateMMNTW(int data0, StringBuilder krStr)"},{"access":"private","name":"LoadFromExtern","line":74,"signature":"private bool LoadFromExtern()"},{"access":"private","name":"LoadFromRegi","line":85,"signature":"private void LoadFromRegi()"},{"access":"public","name":"Init","line":113,"signature":"public void Init()"},{"access":"private","name":"LoadDll","line":124,"signature":"private bool LoadDll(string path = \"…\")"},{"access":"public","name":"DoTrsans","line":181,"signature":"public string DoTrsans(string original)"}],"dependencies":["System","System.Collections.Generic","System.IO","System.Linq","System.Reflection","System.Runtime.InteropServices","System.Text","System.Threading.Tasks"]},{"path":"PipeClient/Program.cs","lines":134,"updatedUtc":"2023-07-10T15:57:39Z","category":"EzTrans IPC 클라이언트","intent":"Program, StreamString 타입으로 메인 앱과 분리된 프로세스에서 EzTrans 요청을 받고 네이티브 번역 결과를 돌려준다.","operation":"Named Pipe 연결을 열고 요청 문자열을 읽어 EzTrans에 전달한 뒤 응답을 같은 파이프로 기록한다.","generated":false,"documentationSource":"automatic","types":["Program","StreamString"],"methods":[{"access":"public","name":"Main","line":17,"signature":"public static void Main(string[] args)"},{"access":"private","name":"StartClients","line":45,"signature":"private static void StartClients()"},{"access":"public","name":"ReadString","line":106,"signature":"public string ReadString()"},{"access":"public","name":"WriteString","line":117,"signature":"public int WriteString(string outString)"}],"dependencies":["System","System.Collections.Generic","System.Diagnostics","System.IO","System.IO.Pipes","System.Linq","System.Security.Principal","System.Text","System.Threading","System.Threading.Tasks"]},{"path":"Updater/Program.cs","lines":35,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Program 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Program"],"methods":[],"dependencies":[]},{"path":"Updater/Updater.cs","lines":410,"updatedUtc":"2026-05-31T14:35:32Z","category":"업데이트","intent":"Updater 타입으로 메인 앱 종료 이후 업데이트 파일 다운로드, 교체, 재실행 과정을 담당한다.","operation":"인자로 받은 경로와 버전을 확인하고 다운로드 진행을 표시한 뒤 잠금이 풀린 파일을 교체한다.","generated":false,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"private","name":"ForceHttps","line":34,"signature":"private static string ForceHttps(string url)"},{"access":"public","name":"OpenURL","line":42,"signature":"public void OpenURL(string url)"},{"access":"private","name":"ParseLocalize","line":65,"signature":"private void ParseLocalize(string localize)"},{"access":"public","name":"DoDownload","line":115,"signature":"public void DoDownload()"},{"access":"private","name":"ComputeSha256","line":136,"signature":"private static string ComputeSha256(string filePath)"},{"access":"private","name":"VerifyDownloadedHash","line":153,"signature":"private bool VerifyDownloadedHash()"},{"access":"private","name":"WriteHashFailCooldown","line":191,"signature":"private static void WriteHashFailCooldown()"},{"access":"private","name":"AfterAsync","line":209,"signature":"private async Task AfterAsync(bool isError)"},{"access":"private","name":"DoDownloadAfter","line":279,"signature":"private void DoDownloadAfter(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"DownloadConfig","line":291,"signature":"private void DownloadConfig(object sender, AsyncCompletedEventArgs e)"},{"access":"private","name":"RemoveOldFile","line":312,"signature":"private void RemoveOldFile(string originalFile, string downloadFile, string backupFile)"},{"access":"private","name":"WaitForFile","line":344,"signature":"private bool WaitForFile(string fullPath)"},{"access":"private","name":"DoClose","line":379,"signature":"private async void DoClose()"},{"access":"private","name":"DownloadProgressCallback4","line":389,"signature":"private void DownloadProgressCallback4(object sender, DownloadProgressChangedEventArgs e)"},{"access":"private","name":"Updater_Load","line":404,"signature":"private void Updater_Load(object sender, EventArgs e)"}],"dependencies":["Microsoft.VisualBasic.Logging","System","System.ComponentModel","System.Diagnostics","System.IO","System.Net","System.Security.Cryptography","System.Security.Policy","System.Threading.Tasks","System.Windows.Forms"]},{"path":"Updater/Updater.Designer.cs","lines":76,"updatedUtc":"2023-07-13T10:38:58Z","category":"WinForms UI 선언","intent":"Updater 화면의 컨트롤 생성, 배치, 기본 속성과 이벤트 연결을 보관한다. 사람이 작성한 동작 코드는 같은 이름의 code-behind 파일에 둔다.","operation":"InitializeComponent가 컨트롤을 만들고 계층에 추가한 뒤 이벤트 핸들러를 연결한다. 런타임 동작은 연결된 partial 클래스가 처리한다.","generated":true,"documentationSource":"automatic","types":["Updater"],"methods":[{"access":"protected","name":"Dispose","line":15,"signature":"protected override void Dispose(bool disposing)"},{"access":"private","name":"InitializeComponent","line":30,"signature":"private void InitializeComponent()"}],"dependencies":[]}]}}</script>
   <script>
     (function(){
       "use strict";