Can't boot on MqMaker MiQi v1.1

[gattolfo98]

Hi, i'm trying to use linux on a MqMaker MiQi v1.1 but it doesn't work (black screen) i have tried with all the images, same result,
log getted with UART:

U-Boot 2014.10-RK3288-10 (Oct 08 2016 - 15:45:52)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 0
SDCard Update.
storage init OK!
Using default environment

GetParam
W: Invalid Parameter's tag (0xFFFFFFFF)!
Invalid parameter
No pmic detect.
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 0000-00-00#0.00
empty serial no.
unknown reboot type 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
'recovery' does not seem to be a partition nor an address
Unable to boot:recovery
try to start backup
'backup' does not seem to be a partition nor an address
Unable to boot:backup
try to start rockusb

i used the folloing command:

url -O https://dl.sd-card-images.johang.se/boots/2025-09-01/boot-miqi.bin.gz
curl -O https://dl.sd-card-images.johang.se/debians/2025-09-01/debian-bookworm-armhf-phuc3a.bin.gz
zcat boot-miqi.bin.gz debian-bookworm-armhf-phuc3a.bin.gz > sd-card.img
dd if=sd-card.img of=/dev/sda bs=4M status=progress //my card was on sda