Lockout-protection failed

[fsedarkalex]

I observed an issue a few days ago - unfortunately I got no trace. I'll try to reproduce...

What happened:
My Lokout protection sensor was on, while it had gotten dark outside. All covers closed except the door cover - good so far.
At some point someone accidentially locked the door which caused the Lockout-Protection-Sensor to go "off". The cover closed - also good.

Now the issue:
I opened the door again (sensor going back to on) and the cover did not open (I think it should do so?).
I manually opened the cover using the controls of the relay actor. A few seconds later the cover was closed again by CCA (lockout sensor still "on")

The "lockout sensor" is "Contact Sensor For Open Window (Full Ventilation)"

Will update with a trace once I was able to reproduce.

[hvorragend]

It is also important to know which CCA version you had the problem with. There was a bug in the last few days that may have recognized the door contacts incorrectly. But it has already been fixed.

[fsedarkalex]

2025.06.11

[hvorragend]

If the bug still exists in the current version, please upload a trace.

Or can I already close the issue?

[fsedarkalex]

This is weird. I can not reproduce the issue anymore - with the same version and with the latest version.

I will close the issue. Will report back if I get it again.

[fsedarkalex]

I had the issue again right now.

I opened the cover manually around 16:20. Then I opened the window right after (few seconds later).
Lockout protection sensor is "open" since then but cover went to a lower position (I think shading) at 16:41.

Maybe it has to do with the manual opening of the cover in advance as I think similar thing happened last time when a friend accidentially locked the door.

this is my lockout sensor:

it happened 16:41

trace automation.cca_terrassentur_2 2025-07-01T14_41_35.324927+00_00.json

[fsedarkalex]

probably also relevant THIS time: I restarted Home Assistant at 16:35 which is why you see another "has been opened" at 16:35:59 but thats still 4-5 minutes before the wrong movement happened

[hvorragend]

Dein Rollo wurde (hier im Trace) geöffnet, weil der Helligkeitswert zum Öffnen überschritten wurde.
Doch das Rollo war ja bereits hoch. Eigentlich ja nicht schlimm.
Dadurch wurde jedoch dein Helper überschrieben und der Aussperrschutz damit aushebelt.

Der ist der gleiche Bug wie in #244 und wird in Kürze behoben.

Danach müssen wir noch einmal schauen, ob es weitere Probleme gibt.

Im Trace kann ich nicht den ganzen Verlauf erkennen. Aber halt die gleichen Symptome wie in #244.

[fsedarkalex]

Sehr schön, dass der Trace dann zumindest hilfreich beim identifizieren war :)