Device not found in database! - Nucleo-F767ZI, STM32F767ZI

[jiapei100]

I'm using Nucleo-F767ZI . It seems Nucleo-F767ZI is NOT supported by QStlink2 yet?

35 Device descriptions loaded.
Searching Device...
ST Link V2 / Nucleo found!
Fetching version...
Fetching mode...
Mode: Debug
Changing mode to SWD...
Fetching mode...
Mode: Debug
Fetching status...
Status: Core Running
Fetching MCU Info...
Device not found in database!
Disconnecting...
Disconnected.

Cheers
Pei

[fpoussin]

Hi,
You can add an entry in devices.xml with the MCU information to enable support.
Thanks

[bm16ton]

this worked for me, tho it reads 2025k.not 2048k It was reading random 128k to 320k, despite multiple cleans and compiles, for sum reason retyping in the 0x1FF0F442 then clean and compile its stable at 2025k, totally confused about that.

<device type="STM32F767" regtype="STM32F4" coretype="CM7">
  <core_id>0x5BA02477</core_id>
  <chip_id>0x451</chip_id>
  <flash_size_reg>0x1FF0F442</flash_size_reg>
  <flash_int_reg>0xE0042004</flash_int_reg>
  <loader>loader_f4.bin</loader>
  <SR_BSY>0x10</SR_BSY>
  <CR_STRT>0x10</CR_STRT>
  <CR_LOCK>0x1F</CR_LOCK>
  <CR_SER>0x1</CR_SER>
  <CR_PGSIZE>0x8</CR_PGSIZE>
  <buffer_size>0x8000</buffer_size>
</device>