Only one alarm message at TTN

[Mclupo]

After update 1.5.6 from 1.5.1
Smod =1,0,0

When I press the red button I get no.1 alarm message to ttn and the serial port.
No.2 alarm message is only shown at the serial port, but the alarm flag at ttn is false. In the past I got 60 messages at ttn with alarm flag = true.

[sebasrpalacio95]

Hello, I apologize, I'm sorry about your problem. I currently can't help you, but I think you might be able to help me. How did you manage to upload the V1.5.6 firmware? The folder I downloaded for that firmware doesn't contain the partitions.bin, bootloader.bin, or app01.bin files, and I can't get the firmware to compile with the Arduino IDE.

Perhaps if you help me and I have the same problem as you, we can help each other. Thank you very much, have a great day.

[Mclupo]

the trackerd device needs all these files only for the first time. Later on only the eur868.bin or any other frequency file needs to be uploaded, beginning at address 0x10000. Use the StM flash tool and just put the .bin file in line one

[namejinnameyuan]

Can you provide the serial port information?

[Mclupo]

Using your new payload decoder gives all the right data. Every thing is ok.