Getting Started

[schweizer4183]

I am currently using Camect. I would like to get started to build my own system using Frigate. I looked at the hardware documentation but I am confused on what all equipment I need to get started. I have 15 outdoor cameras currently that I would like to use with Frigate. I was looking at the Intel 1120P or the 125H but the documentation is unclear as to what else I need. (I.E. Coral TPU / Halio-8 etc.) Could someone please give me list of the equipment that I will need to order to get started? I am pretty confident that I can work through most of the setup and get started once I get past this point. Than you very much for any assistance you are able to provide me with. I am anxious to get started working on this as I have been dabbling with it for a long time.

[NickM-27]

Can you explain how the documentation could be more clear? Is it unclear or are your assumptions expecting there to be more requirements?

With a 1120P or 125H the iGPU would be used with OpenVINO, there is no need for a Hailo or Coral

[schweizer4183]

Nicolas, Thank you for the reply. I am not familiar with the GPU processing so I didn’t know if I needed to purchase anything in addition to the 1120P or the 125H. I am learning more as I work to get this purchased and set up. I have never set these up from scratch before. Previously I have worked with commercial units that were preconfigured. I appreciate your reply and patience with me. Have a great day, Scott From: Nicolas Mowen ***@***.***> Sent: Sunday, November 9, 2025 8:46 AM To: blakeblackshear/frigate ***@***.***> Cc: schweizer4183 ***@***.***>; Author ***@***.***> Subject: Re: [blakeblackshear/frigate] Getting Started (Discussion #20859) Can you explain how the documentation could be more clear? Is it unclear or are your assumptions expecting there to be more requirements? With a 1120P or 125H the iGPU would be used with OpenVINO, there is no need for a Hailo or Coral — Reply to this email directly, view it on GitHub<#20859 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BZ5R5KJMFYECEIBPCNBFO4D335AQNAVCNFSM6AAAAACLSRZEWCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIOJRGU2DSNQ>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>