2 way audio with Reolink camera doesn't work #10812
Replies: 7 comments 1 reply
-
|
You shouldn't be using onvif you should be using rtsp. See the example config https://docs.frigate.video/configuration/camera_specific#reolink-doorbell |
Beta Was this translation helpful? Give feedback.
-
|
Hm.... Doorbell? I don't know what is port 1935 I did what is written there: Now nothing works, no video, no audio and ton's of errors Frigate logs: Go2rtc logs: |
Beta Was this translation helpful? Give feedback.
-
|
Sorry, copied wrong config: |
Beta Was this translation helpful? Give feedback.
-
|
Honestly, I am OK to try any other camera. I tried with Tapo C110, but gave up on this as 2 way audio didn't work for me. People recommended to use Reolink so I gave it a try. If you know some WIFI camera that works out of the box with 2 way audio, i am happy to try |
Beta Was this translation helpful? Give feedback.
-
|
You were right that the latest firmware closed some ports. I had to contact their support. I opened the ports but it still doesn't work. I believe port 1935 doesn't exist on E1 Pro With that configuration: I get these errors: go2rtc logs: frigate logs: But with this configuration I can see and hear video / audio but no mic Do you think it means that E1 Pro just can't work with 2 way audio in frigate? Network setup from the camera (No port 1935)
Should I try a different camera? |
Beta Was this translation helpful? Give feedback.
-
|
I received an update notice on Home Assistant, to update to a new firmware with 2 way audio on ONVIF. Updating through HA didn't work, but there was a link to the firmware, which I installed on the camera. I now need the correct configuration on Frigate. |
Beta Was this translation helpful? Give feedback.
-
|
I'm experiencing this issue as well. I have been able to make audio work but I can't get 2way to work. I was able to make the flv stream work. Oddly enough the save/restart in the config editor saved the config and restarted frigate, but wouldn't connect to the camera after the restart until I rebooted the whole docker container. Couple of things to note for this discussion:
|
Beta Was this translation helpful? Give feedback.

Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
I can't get 2 way audio to work with Reolink camera E1 pro.
I think that this camera supports ONVIF-T with the latest firmware (not sure)
I configured chrome to allow microphone on http, so I do see the microphone icon
I go to frigate->go2rtc->links->video+audio+microphone = two way audio from camera
I get video and audio but mic doesn't work. No log errors at all .
Am I doing something wrong? Is it the camera that doesn't supports it?
Thanks!
Here is the info of the stream from go2rtc:
Version
0.13.2
Frigate config file
Relevant log output
Frigate stats
No response
Operating system
HassOS
Install method
HassOS Addon
Coral version
CPU (no coral)
Any other information that may be helpful
No response
Beta Was this translation helpful? Give feedback.
All reactions