Setup failed, retrying: Modbus Error: Illegal size (3) of register array, cannot convert #804
-
|
Solaredgde modbus multi enabled in Home-assistant. I got an error: Setup failed, retrying: Modbus Error: Illegal size (3) of register array, cannot convert. can anyone help me with this? |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments
-
|
Upload your diagnostic file and debug startup logs: https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Integration-Diagnostics Make sure you are not using other integrations that are stuck on outdated versions. |
Beta Was this translation helpful? Give feedback.
-
|
Also see this issue: #764 You probably installed the other solaredge modbus integration: it's outdated and breaks other integrations. You need to delete it completely and restart Home Assistant. |
Beta Was this translation helpful? Give feedback.
-
|
Indeed, at first i added the Integration „ se modbus“. That gave a simular error. After that i disabled the Integration and added the „se modbus Multi „ which gave the error i discribed. Folowed the advise to delete „se modbus“ and yes it worked. Very happy with your quick response. Also able now to reduce the dc-power of the inverter.ThanksRegardsPaul==>iPadpOp 5 apr 2025 om 16:46 heeft Seth ***@***.***> het volgende geschreven:
Also see this issue: #764
You probably installed the other solaredge modbus integration: it's outdated and breaks other integrations. You need to delete it completely and restart Home Assistant.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
Also see this issue: #764
You probably installed the other solaredge modbus integration: it's outdated and breaks other integrations. You need to delete it completely and restart Home Assistant.