diff --git a/generic_petg_175.xml.fdm_material b/generic_petg_175.xml.fdm_material
index 99e11b646..85f3971f3 100644
--- a/generic_petg_175.xml.fdm_material
+++ b/generic_petg_175.xml.fdm_material
@@ -44,7 +44,7 @@ Generic PETG 1.75mm profile. The data in this file may not be correct for your s
                 <setting key="retraction amount">1.5</setting>
             </hotend>
         </machine>
-        
+
         <machine>
             <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
             <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
@@ -80,5 +80,16 @@ Generic PETG 1.75mm profile. The data in this file may not be correct for your s
             <setting key="print temperature">230</setting>
             <setting key="heated bed temperature">80</setting>
         </machine>
+
+        <machine>
+            <machine_identifier manufacturer="Mixware" product="mixware_hyper_s"/>
+            <setting key="print temperature">230</setting>
+            <setting key="heated bed temperature">80</setting>
+            <setting key="adhesion tendency">0</setting>
+            <setting key="surface energy">100</setting>
+            <setting key="print speed">60</setting>
+            <setting key="heated bed temperature">60</setting>
+            <setting key="retraction amount">1.5</setting>
+        </machine>
     </settings>
 </fdmmaterial>
diff --git a/generic_pla_175.xml.fdm_material b/generic_pla_175.xml.fdm_material
index 488a6f182..f2765a84f 100644
--- a/generic_pla_175.xml.fdm_material
+++ b/generic_pla_175.xml.fdm_material
@@ -128,12 +128,33 @@ Generic PLA 1.75mm profile. The data in this file may not be correct for your sp
             <setting key="heated bed temperature">50</setting>
         </machine>
 
-	<machine>
+	    <machine>
             <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX"/>
             <setting key="print temperature">210</setting>
             <setting key="heated bed temperature">55</setting>
             <hotend id="0.4 mm" />
         </machine>
 
+        <machine>
+            <machine_identifier manufacturer="Mixware" product="mixware_hyper_s"/>
+            <setting key="print speed">60</setting>
+            <setting key="retraction speed">40</setting>
+            <setting key="print cooling">100.0</setting>
+            <setting key="retraction amount">1.5</setting>
+        </machine>
+
+        <machine>
+            <machine_identifier manufacturer="Mixware" product="mixware_wand"/>
+            <setting key="retraction speed">40</setting>
+            <setting key="print cooling">100.0</setting>
+            <setting key="heated bed temperature">0</setting>
+        </machine>
+
+        <machine>
+            <machine_identifier manufacturer="Mixware" product="mixware_vulcan"/>
+            <setting key="retraction speed">40</setting>
+            <setting key="print cooling">100.0</setting>
+        </machine>
+
     </settings>
 </fdmmaterial>