Cannot load logs in mission

[simonIOW]

In 3.0.0.8 cannot load logs automatically with borrowed equipment for a wood transport mission when in AD. Can load manually using UAL.

No visible error messages or anything logged, it just ignores them.

Have rolled back to 3.0.0.6

[regs1980]

Works very well, the wood transport missions with borrowed equipment.

[simonIOW]

Are there any settings needing changing from 3.0.0.6?

I'm using load/unload setting and works fine in 3.0.0.6, but not in 3.0.0.8 with the same map (Kinlaig) and kit. I've not touched any settings.

[regs1980]

Set all or wood in the HUD

[simonIOW]

Yep, still an issue

Remembered to switch on logging, got this on loop...

2025-12-03 22:04:17.796 Info: [AD] 70164 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.796 Info: [AD] 70164 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger
2025-12-03 22:04:17.817 Info: [AD] 70165 FH16 600 (704) : LoadAtDestinationTask:update self.state 2
2025-12-03 22:04:17.817 Info: [AD] 70165 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.817 Info: [AD] 70165 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger
2025-12-03 22:04:17.838 Info: [AD] 70166 FH16 600 (704) : LoadAtDestinationTask:update self.state 2
2025-12-03 22:04:17.838 Info: [AD] 70166 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.838 Info: [AD] 70166 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger
2025-12-03 22:04:17.857 Info: [AD] 70167 FH16 600 (704) : LoadAtDestinationTask:update self.state 2
2025-12-03 22:04:17.857 Info: [AD] 70167 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.857 Info: [AD] 70167 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger
2025-12-03 22:04:17.877 Info: [AD] 70168 FH16 600 (704) : LoadAtDestinationTask:update self.state 2
2025-12-03 22:04:17.877 Info: [AD] 70168 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.878 Info: [AD] 70168 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger
2025-12-03 22:04:17.896 Info: [AD] 70169 nil
2025-12-03 22:04:17.897 Info: [AD] 70169 nil
2025-12-03 22:04:17.897 Info: [AD] 70169 nil
2025-12-03 22:04:17.899 Info: [AD] 70169 FH16 600 (704) : LoadAtDestinationTask:update self.state 2
2025-12-03 22:04:17.899 Info: [AD] 70169 FH16 600 (704) : LoadAtDestinationTask:update isTargetReached
2025-12-03 22:04:17.899 Info: [AD] 70169 FH16 600 (704) : LoadAtDestinationTask:update not isActiveAtTrigger

[simonIOW]

Video of it ignoring the logs :)

https://streamable.com/tiiri1

[simonIOW]

log.txt

[regs1980]

This is not the fault of AD, but of the loading zone on the truck.
Blue is correct, automatic loading works, red is incorrect and nothing will be loaded automatically with AD.

[simonIOW]

If this is true then I'm assuming something has changed to cause this to be an issue in 3.0.0.8 whereas this same vehicle setup works fine in 3.0.0.6.

What do I need to do to amend the loading zones to make the vehicle compatible with 3.0.0.8?

[simonIOW]

I've amended loading zone as above to be blue, and issue remains the same

[regs1980]

It does not work if the extension is set to 1x5 m, it must be set to 2x2.5 m / 1x 5 m, only then will it load the wood.

https://drive.google.com/file/d/177SWPIHmrKw5BAGu52QY8pEnv1HL7QmA/view?usp=drive_link

[simonIOW]

As this is borrowed equipment I don't think you can customise this?

And what has changed between 3.0.0.6 where it worked and 3.0.0.8 where it doesn't?

[simonIOW]

Done some more testing, and it's also not working with purchased kit, with settings as above. Load/drop seems to work fine for other trailers, just seems to be logging that's causing me a headache :(

[simonIOW]

Ok, so it's specifically the FH16 that seems to have the problem, logs onto other trailers works fine.

Could you possibly post your UAL setup xml for the FH16 please?

[regs1980]

Could you possibly post your UAL setup xml for the FH16 please?

You can see everything in the video.
There are no other settings.

#430 (comment)

[simonIOW]

I have found is that if you exit and restart, and you have AutoStart Helper switched on, it does load the logs OK for a mission in progress. Which makes even less sense, as why does it work in 3.0.0.6, and in 3.0.0.8 after a restart for a mission in progress, but then not for any subsequent missions. I will continue working on scenarios! :)

https://streamable.com/pxw9u6