IP150+ communication problems

[Lours373]

Dear all,
as I try to read and found solutions, I'didn't, so my last chanve to understand is you!
What Is my goal? I've camera Arlo system and an alarm paradox that works with EVO92 and IP150+ with Blue Eye connected.
I would like to have in HA all my sensor from my paradox system, and made my salarm system in HA.
THe firmware are as follow when I'm connected directly with the IP address of my IP150+

It seems that I reach to connect to the IP150+ but not with the Panel, if I understand well the log file

2025-04-01 13:11:34,845 - INFO     - PAI - Starting...
2025-04-01 13:11:34,846 - INFO     - PAI.paradox.paradox - Connecting to interface
2025-04-01 13:11:34,847 - INFO     - PAI.paradox.paradox - Using IP Connection
2025-04-01 13:11:35,145 - INFO     - PAI.paradox.connections.ip.connection - Connecting. Try 1/3
2025-04-01 13:11:35,155 - INFO     - PAI.paradox.connections.connection - Connection established
2025-04-01 13:11:35,156 - INFO     - PAI.paradox.connections.ip.commands - Authenticating with IP Module
2025-04-01 13:11:35,169 - INFO     - PAI.paradox.connections.ip.commands - Authentication Success. IP(IP150) Module version 20, firmware: 5.2, serial: *****
2025-04-01 13:11:35,202 - INFO     - PAI.paradox.connections.ip.commands - Session successfully established with IP Module
2025-04-01 13:11:35,203 - INFO     - PAI.paradox.paradox - Connecting to Panel
2025-04-01 13:11:35,246 - INFO     - PAI.paradox.paradox - Panel Identified EVO192 version 3.20 build 10
2025-04-01 13:11:35,247 - INFO     - PAI.paradox.paradox - Initiating panel connection
2025-04-01 13:11:35,326 - INFO     - PAI.paradox.hardware.evo.panel - Installer login
2025-04-01 13:11:35,364 - ERROR    - PAI.paradox.hardware.evo.panel - Authentication Failed. Wrong PASSWORD. Make sure you use correct PC Password. In Babyware: Right click on your panel -> Properties -> PC Communication (Babyware) -> PC Communication (Babyware) Tab.
2025-04-01 13:11:35,366 - ERROR    - PAI - PAI Critical exception. Stopping PAI
Traceback (most recent call last):
  File "/usr/local/lib/python3.11/site-packages/paradox/main.py", line 81, in run_loop
    if await alarm.full_connect():
       ^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/paradox/paradox.py", line 207, in full_connect
    if not await self.connect():
           ^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/paradox/paradox.py", line 187, in connect
    result = await self.panel.initialize_communication(cfg.PASSWORD)
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/paradox/hardware/evo/panel.py", line 189, in initialize_communication
    raise AuthenticationFailed("Wrong PASSWORD")
paradox.exceptions.AuthenticationFailed: Wrong PASSWORD
2025-04-01 13:11:35,375 - INFO     - PAI.paradox.paradox - Disconnecting from the Alarm Panel
2025-04-01 13:11:35,375 - INFO     - PAI.paradox.paradox - Clean Session
2025-04-01 13:11:35,375 - INFO     - PAI.paradox.paradox - Cleaning previous session. Closing connection
2025-04-01 13:11:35,378 - ERROR    - PAI.paradox.connections.protocols - Connection was closed: None
2025-04-01 13:11:35,378 - ERROR    - PAI.paradox.connections.connection - Connection was lost
2025-04-01 13:11:35,379 - INFO     - PAI.paradox.paradox - Disconnected from the Alarm Panel
2025-04-01 13:11:35,380 - INFO     - PAI.paradox.interfaces.interface_manager - Stopping all interfaces
2025-04-01 13:11:35,380 - INFO     - PAI.paradox.interfaces.interface_manager - Stopping BasicMQTTInterface
2025-04-01 13:11:35,381 - INFO     - PAI.paradox.interfaces.interface_manager - Stopping HomeAssistantMQTTInterface
2025-04-01 13:11:35,835 - INFO     - PAI.paradox.interfaces.mqtt.core - MQTT loop stopped
2025-04-01 13:11:35,836 - INFO     - PAI - Good bye!
Attempting to load configuration from /data/options.json

So I supposed that is the firmware not compatible but ot sure...
Paradox tells me that it's not possible to do what I want and I've to buy a KNX card.

Can you help me?
this is the print screen of my configuration

For the password under SYNC_TIME I tryied :

• 0000
• 1234
• my code to disarmed the paradox system
• aaaa
• empty

Thanks a lot for your help.

Regards

[yozik04]

Try connecting with babyware. Log clearly states that password is wrong. Password is pc password. Not your user password.

[Lours373]

yes I agree with you...
tryied to connect with babyware downloaded without sucess as I don't know the PC password.
I asked it to the installer but seems they don't understood my request...
I'll contact hem.

do you have the standard password usuallly used?
thanks a lot

[yozik04]

You already tried standard passwords: 0000 or aaaa

[Lours373]

Unfortunatly yes...
it should be enter in the field "Passward" under TIME_SYNC correct?
it' not the IP_interface passward?

I m going to ask my installer if he can help me with that password.
Try with babyware but I don't know how to find the Id panel.

[yozik04]

IP Interface is ability to use babyware to connect through PAI. So it is different story and there you can put what ever password you want (of course if you need that IP Interface at all...)

[Lours373]

After reception of the code and correct password from my installer...
I reached the connexion and all the MQTT are présent.
Last question, The MQTT sensors are very slow to detect the signal from the EVO192, some times it takes 2 secondes, some time... the signal never change and nobody are detected, is it just due to the LAN connexion and by the way not possible to manage detector as I would like, or is there another way to have the feedbaxk from the PIR sensor directly to HA?
thanks for your help.

[yozik04]

Find Performance related topic in the wiki. There is a solution. Sorry. From mobile.