Wow! What a goldmine of a repo. First of all, thank you so much for your work!
I've recently updated my Unifi U7 Pro XGS to latest firmware version, and found that Tibber Pulse disconnected from the cloud servers. Started investigation and tried for 5+ hours with both AI support, then with AI Ubiquity support, then with a real person. Also send some questions to Tibber. Then I found this repo... Now I don't think I need their help :DD However, a couple of questions:
Anyone get this strange disconnects-after-successful-connect issue?
E.g. I can see in my Web-UI that the device connects OK, stays connected for like 5-10 seconds, and then disconnects. My assumption is that for some reason it can't talk to master server (maybe?) and hence the disconnect. I was thinking maybe IPv6 tunneling is the culprit, but uncertain. As I already tried all settings on Ubiquiti side, I was wondering if anyone had this or similar issue:
-
Device connects and then almost immediately disconnects. The app says "wrong password" at all times. If you restart it later it of course forgets all settings. If I try with a web browser, I see "WifiErr:1008 2201"
-
If you try to connect it to AP with Open security (no password), it errors out with also wrong password error.
Should I try to run local MQTT service and point it at that particular service? I was also considering flashing my own ESP32 with something that can talk HAN and just connect it to HA... But would be nice though to have data both in HA and in Tibber app.
Thanks a lot!
Wow! What a goldmine of a repo. First of all, thank you so much for your work!
I've recently updated my Unifi U7 Pro XGS to latest firmware version, and found that Tibber Pulse disconnected from the cloud servers. Started investigation and tried for 5+ hours with both AI support, then with AI Ubiquity support, then with a real person. Also send some questions to Tibber. Then I found this repo... Now I don't think I need their help :DD However, a couple of questions:
Anyone get this strange disconnects-after-successful-connect issue?
E.g. I can see in my Web-UI that the device connects OK, stays connected for like 5-10 seconds, and then disconnects. My assumption is that for some reason it can't talk to master server (maybe?) and hence the disconnect. I was thinking maybe IPv6 tunneling is the culprit, but uncertain. As I already tried all settings on Ubiquiti side, I was wondering if anyone had this or similar issue:
Device connects and then almost immediately disconnects. The app says "wrong password" at all times. If you restart it later it of course forgets all settings. If I try with a web browser, I see "WifiErr:1008 2201"
If you try to connect it to AP with Open security (no password), it errors out with also wrong password error.
Should I try to run local MQTT service and point it at that particular service? I was also considering flashing my own ESP32 with something that can talk HAN and just connect it to HA... But would be nice though to have data both in HA and in Tibber app.
Thanks a lot!