1.22.1

[Koenkk]

Notes

• For Home Assistant users only: because of the added entity_category support this release requires at least Home Assistant 2021.11.0
• For people using CC2530/CC2531 adapters: a new firmware has been released (20211115 and 20211116). This update is important for CC2530 users since it fixes an issue where the CC2530 has to be replugged when restarting Zigbee2MQTT. Link to new firmwares and changelog.

Improvements

• #3269 Increase interval for pIHeatingDemand to save thermostat battery
• Add Home Assistant entity_category support #9293 Mark indicator led HA switch as entity type config #9309 Correct device class and entity category for last seen HA sensor #9305 Add Home Assistant entity_category support
• Add support for unit of measurement to HA number entities #9312 Add support for unit of measurement to Home Assistant number entities
• #3281 Expose off action for IKEA E1812
• #3268 Normalise attribute reporting intervals
• #9306 Expose update_available sensor with device_class update to Home Assistant
• #3285 Improve Xiaomi WSDCGQ11LM pressure accuracy
• Fix HA discovery device firmware version #9511 Show actual firmware version of device in Home Assistant instead of Zigbee2MQTT version
• #3288 Change TuYa TS0601_rcbo current measurement unit from mA to A
• #446 Check-in command support
• #447 Try to immediately send command to devices when sendWhenActive is used
• #3308 Expose binary vibration sensor for Xiaomi DJT11LM
• #3313 Support power_on_behavior for TuYa TS0115
• #9465 Support switch_type for TuYa TS0011_switch_module, TS0012_switch_module and TS0013_switch_module
• #3323 Add cool system_mode for Zen-01-W
• #9574 Show all clusters in frontend (even ones not defined in zigbee-herdsman)
• #3335 Separately identify TS0011_switch_module, TS0012_switch_module and TS0013_switch_module
• #3337 Support pulse_configuration, interface_mode and current_summation for Develco ZHEMI101
• #3330 Improve Aurora Lighting AU-A1ZBR1GW and AU-A1ZBR2GW stability
• #3341 Add min, max and step value for local_temperature_calibration
• #3359 Expose battery voltage for Xiaomi GZCGQ01LM
• #3362 Expose load for ELKO 4523430
• #9759 Expose pi_heating_demand to Home Assistant
• #9700 Log failed to ping as warning instead of error
• #3401 Support more actions for Xiaomi QBKG26LM
• Add device class for Update Available #9844 Add device class for Home Assistant update available sensor
• #3423 Add low_battery and check_meter for Develco ZHEMI101

Fixes

• #3253 Properly handle update available check failing for IKEA device
• #3267 Fixed PECLS01 battery percentage incorrect
• #3277 Fix fan_state and fan_mode for IKEA E2007
• #9089 Fix color_mode key error in Home Assistant for Lidl HG06467
• availability pings are sent to removed devices #9490 Stop pinging device (availability feature) when it is removed
• #3284 Add running state for TH1400ZB
• Invalid default value for frontend.host when editing in UI #9507 Fix invalid frontend.host default value
• Invalid value for number... (range -65535.0 - 65535.0) #9012 Fix min/max value for Home Assistant number entity
• User extensions are loaded multiple times, stop() is not called #9520 Fix external extensions not started
• Fix homeassistant discovery message for Centralite thermostat fan_only runningstate #9547 Fix Home Assistant discovery message for running_state fan_only
• Neo NAS-AB02B0 support new hardware identify #7051 Fix Neo NAS-AB02B0 not working
• Tuya TS0003 3 gang switch module recognised as Zemismart ZM-L03E-Z #9539 Fix Tuya TS0003 3 gang switch module recognised as Zemismart ZM-L03E-Z
• #3217 Fix Home Assistant command topics for multi endpoint climate devices
• #9599 ZM350STW1TCF doesn't support color temp startup
• #3325 Fix state for Javis JS-SLK2-ZB
• Fix startup blocked by onEvent handlers
• #1010 Fix colortemp range for Philips 8719514301542
• #3353 Fix warning mode for Bitron AV2010/24A
• Missed publishes with optimistic publishing #9658 Fix properties missing when debounce is used under some conditions
• #9723 Allow setting boost_time greater than 100 via Home Assistant
• #3384 Fix power_outage_memory for Xiaomi QBKG40LM and QBKG41LM
• #3389 Fix QBKG40LM operation mode
• update miboxer.js device FUT038Z to be able to select color_xy (RGBW controller) #9779 Fix no color support for Miboxer FUT038Z
• Socket TS011F manufacturer _TZ3000_w0qqde0g not reporting anything except linkquality and on/off #9797 Fix power measurements not working for some TS011F_plug
• Update settings.schema.json #9803 Fix typos in settings shema
• Incorrect state message for Schneider Electric 545D6102 #9646 Fix endpoint missing from state for 545D6102
• #3412 Fix valve_position over reported by a factor of 10 for TS0601_thermostat_1
• Z2M sending multiple MQTT messages for a single sensor payload (last_seen enabled now sends 2 separate mqtt messages) #9519 Send only 1 MQTT message when last_seen is enabled and Zigbee message is received
• HSB color_temp publish over or under values as documented values #9843 Fix synced color temperature out of range when setting color
• "Unsupported device" error logs on interactions with group entities #9218 Fix unsupported device error logs on interactions with group entities
• MaxListenersExceededWarning #9822 Fix "Possible EventEmitter memory leak detected. 1001 drain listeners added to [Socket]" warning
• battery value not correct #9898 Fix ICZB-RM11S battery percentage divided by 2
• #3429 Fix device power source when device has backup battery
• TS004F (instead of TS0044) buttons has only single tap #7158 Fix not all actions being available for TuYa TS004F

New supported devices

This release adds support for 71 devices:

• 046677803087 Philips Hue White ambiance Cher ceiling light
• 07502L Immax 4 in 1 multi sensor
• 1740193P0 Philips Hue Lucca wall light
• 1741730V7 Philips Hue Lily outdoor spot light
• 1742330P7 Philips Hue Calla outdoor
• 1746547P7 Philips Hue White and color ambiance Daylo outdoor wall lamp
• 1746730V7 Philips Hue Lily outdoor spot light
• 2CH-ZG-BOX-RELAY Envilar 2 channel box relay
• 368308_2010 Lidl Silvercrest rdiator valve with thermostat
• 3RSP019BZ Third Reality Zigbee / BLE smart plug
• 4080148P7 Philips Hue Signe table light
• 4080148U9 Philips Hue White and color ambiance Signe table light
• 4080248U9 Philips Hue White and color ambiance Signe floor light
• 4090231P9 Philips Hue Liane
• 4256050-ZHAC Centralite 3-Series smart dimming outlet
• 5047131P8 Philips Hue White ambiance Buckram single spotlight
• 5047230P6 Philips Hue White ambiance Buckram double spotlight
• 73741_LIGHTIFY OSRAM LIGHTIFY RT5/6 LED
• 7A-SS-ZABC-H0 Leedarson 4-in-1-Sensor
• 81848 AduroSmart ERIA smart plug (with power measurements)
• 8719514302235 Philips Hue White Filament Bulb E14
• 8719514328242 Philips Hue white ambiance E27 800lm with Bluetooth
• 8719514344723 Philips Akari downlight
• 8719514392830 Philips Hue White Ambiance E27 filament screw globe
• 8A-SS-BA-H0 Leedarson Motion Sensor
• 9290024683 Philips Hue white ambiance A19 1100lm with Bluetooth
• 9290024689 Philips Hue white and color ambiance B22 1100lm
• 9290024717 Philips Hue white and color ambiance E26/A19 1600lm
• 929002471901 Philips Hue white ambiance E27 1600lm with Bluetooth
• 9290024785 Philips Hue White Ambinance G25 E26 Edison Filament Globe
• 9290024896 Philips Hue white and color ambiance E27
• 9290030211 Philips Hue white Candle bulb E14 bluetooth
• 9290030509 Philips Hue smart plug - EU
• 929003054301 Philips Hue White Ambiance Cher Pendant
• 9290030675 Philips Hue motion sensor
• 929003099101 Philips Hue white ambiance Aurelle rectangle panel light
• AC201 OWON HVAC controller/IR blaster
• CCB432 CASAIA Rail-Din relay and energy meter
• DLKZMK12LM Xiaomi Aqara single switch module T1 (without neutral). Doesn't work as a router and doesn't support power meter
• E1F-N9G Sengled Smart LED filament candle (E12)
• FUT038Z Miboxer RGBW LED controller
• GL-D-006P Gledopto Zigbee 6W anti-glare downlight RGB+CCT (pro)
• GL-D-007P Gledopto Zigbee 12W anti-glare downlight RGB+CCT (pro)
• HG06463B Lidl Livarno Lux E27 G95 filament bulb
• HG07834A Lidl Livarno Lux GU10 spot RGB
• HG07834B Lidl Livarno Lux E14 candle RGB
• HG07834C Lidl Livarno Lux E27 bulb RGB
• JR-ZDS01 Girier 1 gang mini switch
• JS-MC-SENSOR-ZB JAVIS Microwave sensor
• MCCGQ14LM Xiaomi Aqara E1 door & window contact sensor
• PECMS01 Perenio Motion sensor
• SLR1c Hive Heating thermostat
• SLR2c Hive Dual channel heating and hot water thermostat
• SP 234 Innr Smart plug
• THS317 OWON Temperature and humidity sensor
• TI0001-curtain-switch Livolo Zigbee curtain switch (can only read status, control does not work yet)
• TS0011_switch_module TuYa 1 gang switch module - (without neutral)
• TS0012_switch_module TuYa 2 gang switch module - (without neutral)
• TS0013_switch_module TuYa 3 gang switch module - (without neutral)
• TS0601_illuminance_temperature_humidity_sensor TuYa Illuminance, temperature & humidity sensor
• TV02-Zigbee TuYa Thermostat radiator valve
• WS7 JetHome 3-ch battery discrete input module
• WXKG16LM Xiaomi Aqara wireless remote switch E1 (single rocker)
• WXKG17LM Xiaomi Aqara E1 double key wireless switch
• XHS1-UE Universal Electronics Inc Wireless digital pet resistant PIR detector
• ZB-1026 RGB Genie Zigbee LED dimmer controller
• ZBT-CCTLight-Candle0904 Leedarson LED E14 tunable white
• ZBT-CCTLight-GLS0904 Leedarson LED E27 tunable white
• ZBT-DIMLight-GLS0800 Leedarson LED E27 warm white
• ZB_A60_RGBCW Ajax Online Smart Zigbee pro 12W A60 RGBCW bulb
• PMM-300Z1 ShinaSystem SiHAS energy monitor

---

This discussion was created from the release 1.22.1.

[HolGORE]

Hello,
sorry i'm new to this topic.
will there be an updated version for CC1352P2_CC2652P_launchpad_coordinator_20210708.zip this month too?
thanks!

[Koenkk]

A new fw is already available here: https://github.com/Koenkk/Z-Stack-firmware/tree/develop/coordinator/Z-Stack_3.x.0/bin . It is not officially released because:

• I want to include a touchlink fix in it (Texas Instruments is looking into this)
• I want to add the possibility to set the transmit power > 5dbm (which ITEAD Sonoff is looking into)

[KartoffelToby]

i'll not create a duplicate. this is related to this relase #9942

[acaonweb]

To upgrade to 1.22.1 I have to upgrade firmware too? Or I can leave it as is?
Thanx in advance

[sjorge]

You don't need to upgrade the firmware to upgrade to 1.22.1

[acaonweb]

Thanks

[VVVerh]

Hello! I have some troubles with this update on my DIY_Zintercom (by xyzroe). Can't change Mode via home assistant entity. In older versions (1.21) this option was in entities list.

[Koenkk]

@xyzroe could you check this?

[xyzroe]

I've been using a custom entity to set the mode, since the days when mode selection didn't sneak into HA at all.
I have input_select and two automations for reading and setting the mode. Here is example https://pastebin.com/raw/3s8R8FB3

Just updated to the last version of z2m. Here is disabled entity to select mode. But after turning it on, it does not display the current mode and does not allow changing the Zintercom mode.
As I understand it is because of name of the modes. More precisely in first capital letters.
Zintercom uses the names of the modes starting with capital letters, and in HA it is created input_select with lowercase letters.