Replies: 13 comments 14 replies
-
|
Great job, everything work without issue here many thanks! |
Beta Was this translation helpful? Give feedback.
-
|
It’s hue festavia, not festivia |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, will be fixed in the next release |
Beta Was this translation helpful? Give feedback.
-
|
Please add possibility to use old interface or leave the old one. Old one was better at least for me... :( The new one is busy, unconfortable, messy... |
Beta Was this translation helpful? Give feedback.
-
|
you can configure the old one in the settings page: |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for an advice. But unfortunately I have a problem. I have "WebSocket Reconnecting..." message and I can't do nothing. All my devices working but I can't add new devices, configure old, change settings etc. The funny thing that everything was fine yesterday evening. This morning this happened. |
Beta Was this translation helpful? Give feedback.
-
|
Rolled back to fix the problem... |
Beta Was this translation helpful? Give feedback.
-
|
Not happy with the new interface, looks not good in mobile. You have to swipe horizintal the whole time that is super anoyying. |
Beta Was this translation helpful? Give feedback.
-
|
What I found helps on mobile is remove the columns you don't really need. |
Beta Was this translation helpful? Give feedback.
-
|
It does not look good anywhere, it is truly bad design. People are 'proud' to announce that they are using tailwind in their projects, it still means that you need design skills. |
Beta Was this translation helpful? Give feedback.
-
|
@KimpiegamesYT1 and @MortTalmon In your frontend:
...
package: zigbee2mqtt-frontendRestart Z2M and you should have the "old" frontend |
Beta Was this translation helpful? Give feedback.
-
|
This is a great solution. |
Beta Was this translation helpful? Give feedback.
-
|
👍the new layout is somehow to busy for me, to small and less clearly structured. As well couldn't locate the map after 5min... |
Beta Was this translation helpful? Give feedback.
-
|
I have functional devices, but the OTA "Installed version: Not yet reported by device". I also have devices with the "Firmware ID: 500+TZSKT21Z3102". How and what information do I need to gather so the developers can fix the Zigbee2MQTT code? |
Beta Was this translation helpful? Give feedback.
-
|
I thought the Hue Festavia globe outdoor string lights were supported ?
|
Beta Was this translation helpful? Give feedback.
-
|
It has many different models, please submit a new device request: https://github.com/Koenkk/zigbee2mqtt/issues |
Beta Was this translation helpful? Give feedback.
-
|
I don't know how, however they are already in the device list here? https://www.zigbee2mqtt.io/devices/929004581801.html Also, will the gradient_scene and gradient support will be added in the future? because they are a gradient light. |
Beta Was this translation helpful? Give feedback.
-
|
Could you submit a new issue for this with the data/database.db entry of this device attached? |
Beta Was this translation helpful? Give feedback.
-
|
The Bosch Light / Shutter switches 2 doesnt work with the newest update. Had to roll back |
Beta Was this translation helpful? Give feedback.
-
|
This is investigated in #28806 and fixed by Koenkk/zigbee-herdsman-converters#10164. Sorry for the problems! |
Beta Was this translation helpful? Give feedback.
-
|
@Koenkk : Could you maybe change the release notes in Github and add a warning about the Bosch BMCT devices (Light/shutter control unit II, Relay (potential free) and Phase-cut dimmer)? I get the feeling there might be multiple people complaining about it over the month otherwise. |
Beta Was this translation helpful? Give feedback.
-
|
I just saw the dev changelog, do you still need the issue with the .db entry ?Le 4 oct. 2025 à 08:00, Koen Kanters ***@***.***> a écrit :
Could you submit a new issue for this with the data/database.db entry of this device attached?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I have 2 hue motion sensors that stopped reporting motion after the update (lux and temp work fine on the same sensors) |
Beta Was this translation helpful? Give feedback.
-
|
Hi. I have some errors.... mqtt dont start. Please help!! ``[2025-10-16 00:12:44] [32minfo [39m: z2m: Logging to console, file (filename: log.log) |
Beta Was this translation helpful? Give feedback.
-
|
Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 Your Sonoff dongle not responding or have changed his serial port maybe, check the hardware. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. Works !!!
Dnia 16 października 2025 07:52 DadasupR ***@***.***> napisał(a):
Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0
Your Sonoff dongle not responding or have changed his serial port maybe, check the hardware.
— Reply to this email directly, github.com view it on GitHub , or github.com unsubscribe . You are receiving this because you commented. Message ID: <Koenkk/zigbee2mqtt/repo-discussions/28789/comments/14694312 @ github . com>
|
Beta Was this translation helpful? Give feedback.
-
|
After updating to 2.6.2.2 any of my device went offline. I tried to updated Conbee 3 and it didnt change anything. I can interview device but i cant interact with them.
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Feel free to discuss the 2.6.2 release here!
Beta Was this translation helpful? Give feedback.
All reactions