No real time data from valve ZPMeter tuya 214C-ZG-20

[elegac]

Hi

I added with success ZPMeter tuya 214C-ZG-20 with Zigbee2MQTT 2.6.1 (cf. Tuya TS0601_water_valve control via MQTT | Zigbee2MQTT.

I use Zigbee2MQTT through plugin Z2M of Jeedom system. My zigbee dongle is Sonoff (TI CC2652P)

I can manage the valve (ON/OFF) and connectivity is OK (

But I can't get real time data like flow_rate, water_consumed or temperature. I only get them after fews hours. It could be OK for water_consumed but it is totaly useless for flow_rate

Is there something wrong with this device integration. Can I fix it myself ? Is it a Zigbee2MQTT issue or a device limitation ?

Thanks for your help.

Erlé

[jonathan-gatard]

Hi,

I'm also interested :)

Did you find a way to have real time data ?

[elegac]

Hi,
No, it's impossible. By design, this module only can send data each hour. I couldn't find a way to change this parameter via Zigbee2MQTT. So i bought a Tuya gateway to change le report delay to each hour via the SmartLife app. And then I integrated the module in Zigbee2MQTT again. It kept this setting.

So with this module, you can :

• Open / close the valve as you want
• get report (Water consumed and temperature) each hour (minima)

But you can't :

• get Flow rate (even if the valve open when it's report time)