2.4.0

[Koenkk]

Feel free to discuss the 2.4.0 and release here!

[oopiicaa]

I know it's not related to new release, but still: Is there anykind of analytics available for Z2M - specifically percentage of installed version?
Similar as HA's.

The reason I'm asking is that I usually wait for a week or so after a new release and watch over issues here every now and then to see if any major issues arise. Because of that I never had any (major) problems (and because I read the changelogs carefully). Maybe analytics would be helpful in a way to not wait this long before upgrading - I would probably decide easier to do an upgrade if a certain percentage would have new version already.

[Koenkk]

No, z2m does zero user tracking.

[francisp2]

I install the update on my backup Zigbee2MQTT instance, stop my production instance, start the backup instance, let it run for a few hours or a day. If no problems, install update on production, stop backup instance, start production instance.

[kimpenhaus]

new ui is lovely - thanks for that @Nerivec ❤️

[PhilGbHa]

Bonjour, je constate que les périphériques Motion sensor P1 (RTCGQ14LM)
par Aqara
Connecté via [Zigbee2MQTT Bridge]
Ainsi que les Hue motion outdoor sensor (9290030674)
par Philips
Connecté via [Zigbee2MQTT Bridge]
ET les Smart remote controller (HM1RC-2-E)
par HEIMAN
Connecté via [Zigbee2MQTT Bridge]
Deviennent NON-reconnus quand je met à jour Zigbee2MQTT cela m'oblige à rester en version 1.42.0-2 !!!

Home Assistant INFORMATION:

Méthode d'installation Home Assistant OS
Core 2025.6.3
Supervisor 2025.06.2
Operating System 15.2
Interface utilisateur 20250531.4

ID: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_

Merci pour votre aide.

[lux73]

International Forum -> so english only please!

[PhilGbHa]

Hello, I notice that the Motion sensor P1 (RTCGQ14LM) devices by Aqara Connected via [Zigbee2MQTT Bridge] As well as the Hue motion outdoor sensor (9290030674) by Philips Connected via [Zigbee2MQTT Bridge] AND the Smart remote controller (HM1RC-2-E) by HEIMAN Connected via [Zigbee2MQTT Bridge] Become UN-recognized when I update Zigbee2MQTT this forces me to stay in version 1.42.0-2 !!!

[MSL-DA]

You need to read: Zigbee2MQTT 2.0.0 breaking changes

[PhilGbHa]

Home Assistant INFORMATION: Installation Method Home Assistant OS Core 2025.6.3 Supervisor 2025.06.2 Operating System 15.2 User Interface 20250531.4 ID: /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_ Thank you for your help.