Aurora AOne™ 13A Smart Double Socket AU-A1ZBDSS OTA Issues

[mikehedger]

Good morning, I have some Aurora AOne 13A Smart Double Socket AU-A1ZBDSS devices. They are all working great in Z2M. None of them appear in the OTA section of Z2M and the device properties in do not show a firmware version number. Looking at the OTA repository for Z2m shows firmware image v22 was added 2 weeks ago.

https://github.com/Koenkk/zigbee-OTA/blob/master/images/Aurora/MainsPowerOutlet_JN5169_PCB_ARC_OTA_0x1409_v22.ota

Is there anything I can do to get the device to display its current firmware version and also add these devices to the OTA list?

When manually triggering an OTA check, I get the following message in the logs:

Device 'Double Socket (Behind Living Room Desk)' does not support OTA updates

Thanks in advance

[Busta999]

This is resolved in 1.35.2-1 that came out 1 Feb 2024, I have a lot of these and they are updating to firmware 22 from 20 now.

[mikehedger]

Many thanks :)

[ceszenyi]

Hi all,
I have the same issue AU-A1ZBDSS z2m: Update of 'Double Socket Fridge' failed (OTA: Timeout, device did not request any image blocks)

[2024-04-27 23:01:23] info: z2m: Logging to console, file (filename: log.log)
[2024-04-27 23:01:24] info: z2m: Starting Zigbee2MQTT version 1.36.1-dev (commit #3755126)
[2024-04-27 23:01:24] info: z2m: Starting zigbee-herdsman (0.43.1)

[2024-04-27 23:01:24] info: zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload
[2024-04-27 23:01:25] info: zh:zstack:znp: Skip bootloader for CC2652/CC1352
[2024-04-27 23:01:25] info: z2m: zigbee-herdsman started (resumed)
[2024-04-27 23:01:25] info: z2m: Coordinator firmware version: '{"meta":{"maintrel":1,"majorrel":2,"minorrel":7,"product":1,"revision":20230507,"transportrev":2},"type":"zStack3x0"}'
[2024-04-27 23:01:25] info: z2m: Set transmit power to '20'
[2024-04-27 23:01:25] info: z2m: Currently 16 devices are joined:
[2024-04-27 23:01:25] info: z2m: Double Socket Living Room (0x00158d00032d48b5): AU-A1ZBDSS - Aurora Lighting Double smart socket UK (Router)

Also SONOFF update is hanging as well
[2024-04-27 23:02:08] info: z2m: Updating 'SONOFF Small Room Radiator' to latest firmware
[2024-04-27 23:02:45] info: z2m: Update of 'SONOFF Small Room Radiator' at 0.00%

"update": {
"installed_version": 20,
"latest_version": 22,
"state": "available"

Tried one by one, Tried the main version as well - any idea?

[nasixi]

I updated mine to V22, hoping I could get power monitoring to work. I think I may have bricked mine though as I can no longer Z2M to detect the sockets when they are in pairing mode!

[mikehedger]

Does ZHA pick them up? With every 1.35 version for me Z2M keeps restarting with the adapter disconnected message whenever I do a OTA update of any device or put it into pairing mode :(

Using Z2M container in HA Green and an Smlight SLZB-06M

[nasixi]

I'm running HAOS, so not using containers. I can't try ZHA without losing my entire network, by switching to ZHA, from Z2M.

I'm using the ZZH co-ordinator, which has quite an old firmware. I've tried updating it, but can't get the flashing tool to work, even though I updated successfully in the past :(

[mikehedger]

I'm in HAOS as well in the green. Z2M is run inside a container. Pre 1.35 worked good for me.

…

On Fri, 9 Feb 2024, 13:37 nasixi, ***@***.***> wrote: I'm running HAOS, so not using containers. I can't try ZHA without losing my entire network, by switching to ZHA, from Z2M. I'm using the ZZH co-ordinator, which has quite an old firmware. I've tried updating it, but can't get the flashing tool to work, even though I updated successfully in the past :( — Reply to this email directly, view it on GitHub <#21082 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BAPAZCBGXSGLH4CRIIRSA5DYSYRCVAVCNFSM6AAAAABCOCWTSCVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DIMJZGA2DC> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[nasixi]

I was thinking of trying to roll back to the previous Z2M version, but wasn't sure how to do it, other than restoring a backup, which I don't want to do at the moment as I made a load of changes!

[Pel1can111]

This appears to have been broken for me at some point. Just installed a new socket that is on older firmware and I have no OTA options for sockets.

[thestraycat]

Does anyone know the v22 firmware adds over v20? And does v22 play nice with Z2M?