1.25.1

[Koenkk]

Improvements

• #4061 Expose action and operation_mode for Niko 552-721X2 and 552-721X1
• #4055 Improve electrical measurement reporting for Datek HSE2905E
• #4080 Expose battery for PLAID SYSTEMS PS-SPRZMS-SLP3
• #4084 Expose additional functionality for Neo NAS-PD07 and Fantem ZB006-X
• #4060 Expose acceleration for Smartthings 3321-S
• #4095 Expose additional actions for Fantem ZB006-X
• transition should have a debounce/not report immiediately #3949 Expose water_leak for IKEA E1842
• #4114 Expose voltage and energy for Xiaomi SP-EUC01
• #4123 Prefer hue/saturation color mode over X/Y for Lidl HG08633
• Mark calibration, calibration_time and motor_reversal as config sensors #12146 Mark calibration, calibration_time and motor_reversal as config sensors in Home Assistant
• #4125 Support power on behavior for Sonoff ZBMINI-L
• SMHM-I1 fix battery level and voltage #12204 Expose battery % for HEIMAN SMHM-I1
• #4146 Expose additional functionality for Woox R7049
• #4152 Add child_lock and led_enable support to the Niko Outlets
• #4154 Expose additional functionality for Namron 4512737/4512738
• #4102 Expose additional functionality for Fantem ZB006-X
• #4173 Expose temperature_scale for Neo NAS-PD07 and correct humidity/temperature min/max ranges for Neo NAS-AB02B0 and NAS-PD07
• #4182 Expose child_lock for Moes ZP-LZ-FR2U
• #4180 Expose new features and fixes for Fantem ZB003-X

Fixes

• Error converting file（spotmau 1 gang） #12022 Fix Spotmau SP-PS1-02 not working
• Curtain Motor Xiaomi ZNCLDJ11LM state is always closed since 1.25 (position attribute works fine) #12025 Fix curtain motor state incorrect in Home Assistant
• TuYa U86KCJ-ZP（zigbeeModel: 005f0c3b） #12023 Fix zigbee model for 005f0c3b TuYa U86KCJ-ZP
• garage_door_entity of PJ-ZGD01 not supported by Home Assistant #12038 Fix invalid Home Assistant device class for garage_door_contact
• Tuya Smart Air Box (AirBox04) mixes up CO2 and Formaldehyde data #11033 TuYa TS0601_smart_air_house_keeper converter error #12019 Fix incorrect co2/pm25 values for TuYa TS0601_air_quality_sensor
• #4066 Fix incorrect action for TuYa U86KCJ-ZP
• SMHM-I1 fix #12076 Remove tamper from HEIMAN SMHM-I1 (not supported)
• FNB56-GAS05FB1.4 fix #12077 Remove battery_low and tamper from Feibit SGA01ZB (not supported).
• #4086 Fix configure failing for some electrical measurement devices due to unsupported acFrequencyDivisor/acFrequencyMultiplier attribute
• "Exception while calling fromZigbee converter" when adding Develco/Frient SMSZB-120 #12080 Fix Cannot set property 'softwareBuildID' of undefined exception when pairing Develco/Frient SMSZB-120
• TS011F_TZ3000_gjnozsaz have to poll data #12097 Fix no power measurements reported for TS011F plugs with appVersion 74
• Aqara water leak sensor reports false leakage after update to latest version  #12018 Fix incorrect water_leak state for Xiaomi SJCGQ11LM
• #4085 Fix no energy reported for Micro Matic Norge AS ZB250
• Moes ZP-LZ-FR2U L1 and L2 toggling together #12149 Fix Moes ZP-LZ-FR2U sockets controlled together
• Aqara XDD13LM brightness control problem. #12154 Fix Xiaomi XDD13LM, XDD12LM and XDD11LM state incorrect when brightness is set to 1
• #4129 Fix LELLKI XF-EU-S100-1-M not controllable
• #4130 Fix duplication of voltage value for Xiaomi JTYJ-GD-01LM/BW
• Raspberry pi zero ran out of ram during installation #12034 Fix out of memory error when starting on system with low RAM
• #4143 Fix position inverted for Zemismart ZM-AM02_cover (_TZE200_gubdgai2)
• Occasional flickering of iCasa lamps #4561 Fix occasional flickering of iCasa lamps
• #4160 Define load_estimate min/max value for Danfoss 014G2461
• Eglo Fueva mis-identified as lightbulb #12281 Fix Eglo Fueva ceiling light mis-identified
• Tuya Smart Air Box (AirBox04) mixes up CO2 and Formaldehyde data #11033 Fix TS0601_air_quality_sensor formaldehyd and voc units
• #4163 Fix Xiaomi ZNJLBL01LM position sometimes incorrect
• No converter available for 'on_time'  #12276 Fix No converter available for 'on_time' for lights
• Xiaomi Aqara S2 lock ZNMS12LM, state ON/OFF instead of LOCK/UNLOCK #12279 Fix Xiaomi Aqara S2 lock ZNMS12LM state being ON/OFF instead of LOCK/UNLOCK
• #4171 Add OTA support and fix battery for Xiaomi WSDCGQ12LM
• Tuya Smart Air Box (AirBox04) mixes up CO2 and Formaldehyde data #11033 Fix invalid pm25 values for TuYa TS0601_air_quality_sensor
• No converter available for NAS-AB02B0 (and NAS-PD07) with cluster manuSpecificTuya and type commandMcuSyncTime and data {payloadSize:XXX} #12225 Fix No converter available warning for Neo NAS-AB02B0 and NAS-PD07
• #4181 Fix battery for Xiaomi WXKG16LM
• #4180 Fix Fantem ZB006-X configure error
• MoesGo EDM-1ZBB-EU reported "Received unexpected Tuya DataPoint" #12313 Fix Received unexpected Tuya DataPoint #2 error for _TZE200_dfxkcots

New supported devices

This release adds support for 41 new devices:

• 14153806L Lidl Livarno smart LED ceiling light
• 3315-L Iris Water sensor
• 43023 VBLED ZigBee AC phase-cut dimmer
• 4500994 Connecte Smart thermostat
• 5060930P7 Philips Hue White & Color Ambiance Centris ceiling light (3 spots)
• 5061030P7 Philips Hue White & Color ambience Centris ceiling light (2 spots) (black)
• 5412748727371 Prolight E27 white and colour bulb
• 5412748727395 Prolight GU10 spot dimmable
• 9133 Led Trading Pushbutton transmitter module
• 915005996901 Philips Hue white ambiance ceiling light Enrave L with Bluetooth
• 915005997601 Philips Hue Devere M white ambiance white & dimmer
• 915005997701 Philips Hue Devere L white ambiance white & dimmer
• 915005998201 Philips Hue Bluetooth white & color ambiance ceiling lamp Infuse
• 929002294102 Philips Hue white candle bulb E14 bluetooth
• 929003046201 Philips Hue White Ambiance Runner triple spotlight
• A9MEM1570 Schneider Electric PowerTag power sensor
• BY 286 C Innr B22 bulb RGBW
• CCT592011 Schneider Electric Wiser water leakage sensor
• CS-Z-CZ-2402 DNAKE Smart socket
• DS20Z07B ORVIBO Downlight (S series)
• E2102 IKEA PRAKTLYSING cellular blind
• E2103 IKEA TREDANSEN cellular blind
• FB21-001 Lidl Livarno Lux switch and dimming light remote control
• FUT089Z MiBoxer RGB+CCT Remote
• GDC311ZBQ1 TuYa LoraTap garage door opener with wireless sensor
• HG08008 Lidl Livarno Home LED ceiling light
• HG08633 Lidl Livarno gardenspot RGB
• IA-CDZOTAAA007MA-MAN ADEO ENKI LEXMAN E27 7.2 to 60W LED RGBW
• IST-CDZFB2AS007NA-MZN-01 ADEO ENKI LEXMAN E27 LED white
• JM-TRH-ZGB-V1 TuYa Temperature & humidity sensor with clock
• JY-GZ-01AQ Xiaomi Aqara smart smoke detector
• LA-5KEY-RGBW Ynoa 5 key control for RGBW light
• LA-GU10-RGBW Ynoa Smart LED GU10 RGB CCT
• OGL 130 C Innr Outdoor smart globe lights
• RTCGQ14LM Xiaomi Aqara P1 human body movement and illuminance sensor
• SP 110 Innr Smart plug
• SP2610ZB Sinopé Zigbee smart outlet
• SR-ZG9001K2-DIM Sunricher Zigbee wall remote control for single color, 1 zone
• TS0601_co2_sensor TuYa NDIR co2 sensor
• TS0601_smart_human_presense_sensor TuYa Smart Human presence sensor
• WNRR15/WNRR20 Legrand Outlet with power consumption monitoring

---

This discussion was created from the release 1.25.1.

[andreas-git]

Hi,

after updating to 1.25.1 my Z2B frontend in HA seems not to work, just blank page.
My Z2M configuration.yaml:
homeassistant: true mqtt: server: mqtt://core-mosquitto:1883 user: addons password: waePaechovu1wahSheid3eiy2waemahQuaeceego0toxoghohdo3Wu6Iez3Aeg6i keepalive: 60 reject_unauthorized: true version: 4 serial: port: tcp://192.168.178.23:8888 adapter: ezsp baudrate: 115200 rtscts: true frontend: port: 8099 permit_join: true devices: '0x847127fffedd1a9d': friendly_name: '0x847127fffedd1a9d' '0xcc86ecfffe951311': friendly_name: '0xcc86ecfffe951311' '0xcc86ecfffe9550ba': friendly_name: '0xcc86ecfffe9550ba' '0x00158d0002ffeaa3': friendly_name: 0x00158d0002ffeaa3 Tint Remote legacy: false '0x804b50fffe052b4e': friendly_name: '0x804b50fffe052b4e' advanced: log_syslog: app_name: Zigbee2MQTT eol: /n host: localhost localhost: localhost path: /dev/log pid: process.pid port: 123 protocol: tcp4 type: '5424' channel: 15 network_key: ***** groups: {}
Rolling back to 1.25.0-1 seems fine.

Any Ideas ?

Best Regards

[vandad51]

Having same issue.

[navycrow]

+1

edit: uninstall / install seems to resolve the problem

[zorruno]

+1 (previous version restored from backup)

[mrJudahBella]

Yup, same issue here.

EDIT: Fixed by emptying caches on Safari. (Develop -> Empty Caches)
EDIT2: Resetting frontend cache on the HA iOS app fixes the problem also.

[jonaseymour]

+1 rolled back to previous version.

[billythunder88]

emptying the browser cache worked for me.

[bribeck]

I installed this update and got the new Aqara P1 motion sensor it works great but the blue detection light seems to be off by default is there a way to turn in on?

[laszlojakab]

For me it was turned on by default, I would like to turn it off :-) Could you change the blue detection light to on/off?

[lux73]

i don't think you got support for such an 4 month old Version like 1.25.1

try updating pls and then open new Thread for the detection Light "issue"

[kelvinfanSZ]

Nice, Schneider Electric PowerTag be supported! Who is the contributor?

Is a special NCP firmware is needed to support this device? I worked on this device in Schneider Electric for few months.

[Koenkk]

@filips added it