3,5" LCD Touch ILI9481 + ESP32 Wroom

[DSRocker]

Hi,
I would like to use my 3,5" Touch Display with openHASP. Is it possible right now or in future?
Thanks a lot for this good joob! 👍

[fvanroie]

ILI9481 displays are supported via the TFT_eSPI or LovyanGFX libraries.
Can you provide a link to the product specifications of the screen and ESP32 you are using?

[DSRocker]

I have this one: https://electropeak.com/learn/interfacing-3-5-inch-full-color-touch-tft-display-module-with-arduino/

[DSRocker]

ESP32 Dev Kit C
I 2 versions:
https://www.az-delivery.de/en/products/esp32-dev-kit-c-v4-unverlotet
https://www.az-delivery.de/en/products/esp32-developmentboard

[fvanroie]

I have this one: https://electropeak.com/learn/interfacing-3-5-inch-full-color-touch-tft-display-module-with-arduino/

That display should work using this contributed configuration file. It does not have a touch controller, so the touches are sampled using ADC instead. Also this screen does not support backlight control. I would advise using the Waveshare Touch Shield instead.

ESP32 Dev Kit C

These dev boards are typically used in the AZ-Touch enclosure or FreeTouchDeck using the combiner PCB provided.
Of course, you can also connect the display using jumper cables according to the configuration file.