AdsError: 6 (0X6, sorry, no error text [port 500])

[bkchaluvadi]

Hi ,

OS: Windows 11
twincat version: 4024.53
target system: UmRT_Default

I am trying to run this project on my local machine. The project build with no errors. But when I tried running the project, it shows an error.

Init4\IO: Download Task Attrib: NC: new startup >> AdsError: 6 (0X6, sorry, no error text [port 500]) << failed

Info: I do not see any devices to disable in my project, only a single entry present in my Mapping.

[MarkLewis-Beckhoff]

Ads return code 6 is port not found and port 500 is the NC port for motion.

do you have the license setup for TF5000?. the project was built without hardware so you should not need to disable anything.

[bkchaluvadi]

I don't have the license for TF500. Aren't all licenses for the Beckhoff development environment free and renewed weekly? Additionally, after disabling "NC-Task 1 SAF", I encountered a different login error. While it successfully opened "Port_851", it faced subsequent issues.

[MarkLewis-Beckhoff]

yes they are free to develop. just enable the motion and go to the license tab and click "7 days trial license"

[bkchaluvadi]

Looks like it is already in activated state.

[bkchaluvadi]

When I run the Activate Configuration with out disabling the NC - Task 1 SAF. I can see the following error on the UmRT_Default terminal

TwinCAT System: Source: TcOsSys;  Timestamp: 10/30/2023 4:30:05 PM 960 ms  Message: LoadExternalModules(): Error: LoadDrv for driver >TcNc< failed with error 0xc0000001 (STATUS_UNSUCCESSFUL)
Sending ams command >> Init4\IO: Download Task A
![PackMLProject8](https://github.com/Beckhoff-USA-Community/PackML_PLC_Example/assets/144023762/b90299f0-bd7f-4cb9-b333-22b60cc11404)
![PackMLProject8](https://github.com/Beckhoff-USA-Community/PackML_PLC_Example/assets/144023762/ef1b6f09-3a20-4d4c-9692-f44aea3c60a5)
ttrib: NC: new startup >> AdsError: 6 (0x6, sorry, no error text [port 500]) << failed!
TcSysSrvUm state: Config

[MarkLewis-Beckhoff]

I am sorry this has gone on so long have you found what was the cause or is this still going on?

[LakeLiving]

I have the same problem and would be interested about the solution.

[RyanMontigny]

I just ran into this issue also...

we must install the following package for the user mode runtime to work with the NC:
TwinCAT.XARUM.NCPTP

after installing that package, the port 500 issue was resolved on my system. I hope this helps!

[sgwong]

I just ran into this issue also...

we must install the following package for the user mode runtime to work with the NC: TwinCAT.XARUM.NCPTP

after installing that package, the port 500 issue was resolved on my system. I hope this helps!

This works. thanks.